--- /dev/null
-/* These are not provided in SPL and result in a linker error */
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_USE_ARCH_MEMCPY
-#define CONFIG_USE_ARCH_MEMSET
-#endif
+ /*
+ * Copyright 2013-2015 Toradex, Inc.
+ *
+ * Configuration settings for the Toradex Apalis iMX6
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+ #ifndef __CONFIG_H
+ #define __CONFIG_H
+
+ #include "mx6_common.h"
+ #define CONFIG_SYS_THUMB_BUILD
+
+ #undef CONFIG_DISPLAY_BOARDINFO
+ #define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
+
+ #define CONFIG_MACH_TYPE 4886
+
+ #define CONFIG_SYS_GENERIC_BOARD
+
+ #include <asm/arch/imx-regs.h>
+ #include <asm/imx-common/gpio.h>
+
+ #ifdef CONFIG_SPL
+ #include "imx6_spl.h"
+ #define CONFIG_SPL_PAD_TO 0x11000 /* 4k IVT/DCD, 64k SPL */
+ #endif
+
+ #define CONFIG_CMDLINE_TAG
+ #define CONFIG_SETUP_MEMORY_TAGS
+ #define CONFIG_INITRD_TAG
+ #define CONFIG_REVISION_TAG
+ #define CONFIG_SERIAL_TAG
+
+ /* Size of malloc() pool */
+ #define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024)
+
+ #define CONFIG_BOARD_EARLY_INIT_F
+ #define CONFIG_BOARD_LATE_INIT
+ #define CONFIG_MISC_INIT_R
+
+ #define CONFIG_MXC_UART
+ #define CONFIG_MXC_UART_BASE UART1_BASE
+
+ /* Make the HW version stuff available in U-Boot env */
+ #define CONFIG_VERSION_VARIABLE /* ver environment variable */
+ #define CONFIG_ENV_VARS_UBOOT_CONFIG
+ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+ /* I2C Configs */
+ #define CONFIG_SYS_I2C
+ #define CONFIG_SYS_I2C_MXC
+ #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
+ #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
+ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
+ #define CONFIG_SYS_I2C_SPEED 100000
+
+ /* OCOTP Configs */
+ #define CONFIG_CMD_FUSE
+ #ifdef CONFIG_CMD_FUSE
+ #define CONFIG_MXC_OCOTP
+ #endif
+
+ /* MMC Configs */
+ #define CONFIG_FSL_ESDHC
+ #define CONFIG_FSL_USDHC
+ #define CONFIG_SYS_FSL_ESDHC_ADDR 0
+ #define CONFIG_SYS_FSL_USDHC_NUM 3
+
+ #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
+ #define CONFIG_MMC
+ #define CONFIG_GENERIC_MMC
+ #define CONFIG_BOUNCE_BUFFER
+ #define CONFIG_FAT_WRITE
+ #define CONFIG_DOS_PARTITION
+
+ #ifdef CONFIG_MX6Q
+ #define CONFIG_CMD_SATA
+ #endif
+
+ /*
+ * SATA Configs
+ */
+ #ifdef CONFIG_CMD_SATA
+ #define CONFIG_DWC_AHSATA
+ #define CONFIG_SYS_SATA_MAX_DEVICE 1
+ #define CONFIG_DWC_AHSATA_PORT_ID 0
+ #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
+ #define CONFIG_LBA48
+ #define CONFIG_LIBATA
+ #endif
+
+ /* Network */
+ #define CONFIG_FEC_MXC
+ #define CONFIG_MII
+ #define IMX_FEC_BASE ENET_BASE_ADDR
+ #define CONFIG_FEC_XCV_TYPE RGMII
+ #define CONFIG_ETHPRIME "FEC"
+ #define CONFIG_FEC_MXC_PHYADDR 6
+ #define CONFIG_PHYLIB
+ #define CONFIG_PHY_MICREL
+ #define CONFIG_PHY_MICREL_KSZ9031
+ #define CONFIG_IP_DEFRAG
+ #define CONFIG_TFTP_BLOCKSIZE 4096
+ #define CONFIG_TFTP_TSIZE
+
+ /* USB Configs */
+ /* Host */
+ #define CONFIG_USB_HOST_ETHER
+ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
+ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+ #define CONFIG_MXC_USB_FLAGS 0
+ #define CONFIG_USB_KEYBOARD
+ #ifdef CONFIG_USB_KEYBOARD
+ #define CONFIG_SYS_USB_EVENT_POLL
+ #endif /* CONFIG_USB_KEYBOARD */
+ /* Client */
+ #define CONFIG_USB_GADGET_VBUS_DRAW 2
+ #define CONFIG_USBD_HS
+
+ #define CONFIG_USB_GADGET_MASS_STORAGE
+ #define CONFIG_USB_FUNCTION_MASS_STORAGE
+ #define CONFIG_G_DNL_MANUFACTURER "Toradex"
+ /* USB DFU */
+ #define CONFIG_DFU_MMC
+
+ /* Miscellaneous commands */
+ #define CONFIG_CMD_BMODE
+ #define CONFIG_MXC_GPIO
+
+ /* Framebuffer and LCD */
+ #define CONFIG_VIDEO_IPUV3
+ #define CONFIG_SYS_CONSOLE_IS_IN_ENV
+ #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+ #define CONFIG_VIDEO_BMP_RLE8
+ #define CONFIG_SPLASH_SCREEN
+ #define CONFIG_SPLASH_SCREEN_ALIGN
+ #define CONFIG_BMP_16BPP
+ #define CONFIG_VIDEO_LOGO
+ #define CONFIG_VIDEO_BMP_LOGO
+ #define CONFIG_IPUV3_CLK 260000000
+ #define CONFIG_CMD_HDMIDETECT
+ #define CONFIG_CONSOLE_MUX
+ #define CONFIG_IMX_HDMI
+ #define CONFIG_IMX_VIDEO_SKIP
+ #define CONFIG_CMD_BMP
+
+ /* allow to overwrite serial and ethaddr */
+ #define CONFIG_ENV_OVERWRITE
+ #define CONFIG_CONS_INDEX 1
+ #define CONFIG_BAUDRATE 115200
+
+ /* Command definition */
+ #undef CONFIG_CMD_LOADB
+ #undef CONFIG_CMD_LOADS
+ #undef CONFIG_CMD_NFS
+ #undef CONFIG_CMD_FLASH
+
+ #undef CONFIG_IPADDR
+ #define CONFIG_IPADDR 192.168.10.2
+ #define CONFIG_NETMASK 255.255.255.0
+ #undef CONFIG_SERVERIP
+ #define CONFIG_SERVERIP 192.168.10.1
+
+ #define CONFIG_LOADADDR 0x12000000
+ #define CONFIG_SYS_TEXT_BASE 0x17800000
+
+ #ifdef CONFIG_CMD_SATA
+ #define CONFIG_DRIVE_SATA "sata "
+ #else
+ #define CONFIG_DRIVE_SATA
+ #endif
+
+ #ifdef CONFIG_CMD_MMC
+ #define CONFIG_DRIVE_MMC "mmc "
+ #else
+ #define CONFIG_DRIVE_MMC
+ #endif
+
+ #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
+
+ #define DFU_ALT_EMMC_INFO \
+ "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
+ "boot part 0 1;" \
+ "rootfs part 0 2;" \
+ "uImage fat 0 1;" \
+ "imx6q-colibri-eval-v3.dtb fat 0 1;" \
+ "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
+
+ #define EMMC_BOOTCMD \
+ "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
+ "rootwait\0" \
+ "emmcboot=run setup; " \
+ "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
+ "${vidargs}; echo Booting from internal eMMC chip...; " \
+ "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
+ "${boot_file} && run fdt_fixup && " \
+ "bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
+ "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+
+ #define MEM_LAYOUT_ENV_SETTINGS \
+ "fdt_addr_r=0x12000000\0" \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "kernel_addr_r=0x11000000\0" \
+ "ramdisk_addr_r=0x12100000\0"
+
+ #define NFS_BOOTCMD \
+ "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
+ "nfsboot=run setup; " \
+ "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
+ "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
+ "run nfsdtbload; dhcp ${kernel_addr_r} " \
+ "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
+ "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+
+ #define SD_BOOTCMD \
+ "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
+ "rootwait\0" \
+ "sdboot=run setup; " \
+ "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
+ "${vidargs}; echo Booting from SD card; " \
+ "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
+ "${boot_file} && run fdt_fixup && " \
+ "bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
+ "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+
+ #define USB_BOOTCMD \
+ "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
+ "rootwait\0" \
+ "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
+ "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
+ "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
+ "${boot_file} && run fdt_fixup && " \
+ "bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
+ "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+
+ #ifndef CONFIG_TDX_APALIS_IMX6_V1_0
+ #define FDT_FILE "imx6q-apalis-eval.dtb"
+ #define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
+ #else
+ #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
+ #endif
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
+ "run nfsboot ; echo ; echo nfsboot failed ; " \
+ "usb start ;" \
+ "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
+ "boot_file=uImage\0" \
+ "console=ttymxc0\0" \
+ "defargs=enable_wait_mode=off vmalloc=400M\0" \
+ "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
+ EMMC_BOOTCMD \
+ "fdt_file=" FDT_FILE "\0" \
+ "fdt_fixup=;\0" \
+ MEM_LAYOUT_ENV_SETTINGS \
+ NFS_BOOTCMD \
+ SD_BOOTCMD \
+ "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
+ "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
+ "flash_eth.img && source ${loadaddr}\0" \
+ "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
+ "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
+ "source ${loadaddr}\0" \
+ "setup=setenv setupargs fec_mac=${ethaddr} " \
+ "consoleblank=0 no_console_suspend=1 console=tty1 " \
+ "console=${console},${baudrate}n8\0 " \
+ "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
+ "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
+ "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
+ "source ${loadaddr}\0" \
+ "splashpos=m,m\0" \
+ "vidargs=mxc_hdmi.only_cea=1 " \
+ "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
+ "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
+ "fbmem=32M\0 "
+
+ /* Miscellaneous configurable options */
+ #define CONFIG_SYS_LONGHELP
+ #define CONFIG_AUTO_COMPLETE
+ #undef CONFIG_SYS_CBSIZE
+ #define CONFIG_SYS_CBSIZE 1024
+ #undef CONFIG_SYS_MAXARGS
+ #define CONFIG_SYS_MAXARGS 48
+
+ #define CONFIG_SYS_ALT_MEMTEST
+ #define CONFIG_SYS_MEMTEST_START 0x10000000
+ #define CONFIG_SYS_MEMTEST_END 0x10010000
+ #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
+
+ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+ #define CONFIG_CMDLINE_EDITING
+
+ /* Physical Memory Map */
+ #define CONFIG_NR_DRAM_BANKS 1
+ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+ #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+ #define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+ #define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+ /* FLASH and environment organization */
+ #define CONFIG_SYS_NO_FLASH
+
+ #define CONFIG_ENV_SIZE (8 * 1024)
+
+ #define CONFIG_ENV_IS_IN_MMC
+
+ #if defined(CONFIG_ENV_IS_IN_MMC)
+ /* Environment in eMMC, before config block at the end of 1st "boot sector" */
+ #define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \
+ CONFIG_TDX_CFG_BLOCK_OFFSET)
+ #define CONFIG_SYS_MMC_ENV_DEV 0
+ #define CONFIG_SYS_MMC_ENV_PART 1
+ #endif
+
+ #define CONFIG_OF_SYSTEM_SETUP
+
+ #define CONFIG_CMD_TIME
+
+ #define CONFIG_SUPPORT_RAW_INITRD
+
+ #define CONFIG_CRC32_VERIFY
+
+ #endif /* __CONFIG_H */
--- /dev/null
-/* These are not provided in SPL and result in a linker error */
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_USE_ARCH_MEMCPY
-#define CONFIG_USE_ARCH_MEMSET
-#endif
+ /*
+ * Copyright 2013-2015 Toradex, Inc.
+ *
+ * Configuration settings for the Toradex Colibri iMX6
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+ #ifndef __CONFIG_H
+ #define __CONFIG_H
+
+ #include "mx6_common.h"
+ #define CONFIG_SYS_THUMB_BUILD
+
+ #undef CONFIG_DISPLAY_BOARDINFO
+ #define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
+
+ #define CONFIG_SYS_GENERIC_BOARD
+
+ #include <asm/arch/imx-regs.h>
+ #include <asm/imx-common/gpio.h>
+
+ #ifdef CONFIG_SPL
+ #include "imx6_spl.h"
+ #define CONFIG_SPL_PAD_TO 0x11000 /* 4k IVT/DCD, 64k SPL */
+ #endif
+
+ #define CONFIG_CMDLINE_TAG
+ #define CONFIG_SETUP_MEMORY_TAGS
+ #define CONFIG_INITRD_TAG
+ #define CONFIG_REVISION_TAG
+ #define CONFIG_SERIAL_TAG
+
+ /* Size of malloc() pool */
+ #define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024)
+
+ #define CONFIG_BOARD_EARLY_INIT_F
+ #define CONFIG_BOARD_LATE_INIT
+ #define CONFIG_MISC_INIT_R
+
+ #define CONFIG_MXC_UART
+ #define CONFIG_MXC_UART_BASE UART1_BASE
+
+ /* Make the HW version stuff available in U-Boot env */
+ #define CONFIG_VERSION_VARIABLE /* ver environment variable */
+ #define CONFIG_ENV_VARS_UBOOT_CONFIG
+ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+ /* I2C Configs */
+ #define CONFIG_SYS_I2C
+ #define CONFIG_SYS_I2C_MXC
+ #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
+ #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
+ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
+ #define CONFIG_SYS_I2C_SPEED 100000
+
+ /* OCOTP Configs */
+ #define CONFIG_CMD_FUSE
+ #ifdef CONFIG_CMD_FUSE
+ #define CONFIG_MXC_OCOTP
+ #endif
+
+ /* MMC Configs */
+ #define CONFIG_FSL_ESDHC
+ #define CONFIG_FSL_USDHC
+ #define CONFIG_SYS_FSL_ESDHC_ADDR 0
+ #define CONFIG_SYS_FSL_USDHC_NUM 2
+
+ #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
+ #define CONFIG_MMC
+ #define CONFIG_GENERIC_MMC
+ #define CONFIG_BOUNCE_BUFFER
+ #define CONFIG_FAT_WRITE
+ #define CONFIG_DOS_PARTITION
+
+ /* Network */
+ #define CONFIG_FEC_MXC
+ #define CONFIG_MII
+ #define IMX_FEC_BASE ENET_BASE_ADDR
+ #define CONFIG_FEC_XCV_TYPE RMII
+ #define CONFIG_ETHPRIME "FEC"
+ #define CONFIG_FEC_MXC_PHYADDR 1
+ #define CONFIG_PHYLIB
+ #define CONFIG_PHY_MICREL
+ #define CONFIG_IP_DEFRAG
+ #define CONFIG_TFTP_BLOCKSIZE 16352
+ #define CONFIG_TFTP_TSIZE
+
+ /* USB Configs */
+ /* Host */
+ #define CONFIG_USB_HOST_ETHER
+ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+ #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
+ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+ #define CONFIG_MXC_USB_FLAGS 0
+ #define CONFIG_USB_KEYBOARD
+ #ifdef CONFIG_USB_KEYBOARD
+ #define CONFIG_SYS_USB_EVENT_POLL
+ #endif /* CONFIG_USB_KEYBOARD */
+ /* Client */
+ #define CONFIG_USB_GADGET_VBUS_DRAW 2
+ #define CONFIG_USBD_HS
+
+ #define CONFIG_USB_GADGET_MASS_STORAGE
+ #define CONFIG_USB_FUNCTION_MASS_STORAGE
+ #define CONFIG_G_DNL_MANUFACTURER "Toradex"
+ /* USB DFU */
+ #define CONFIG_DFU_MMC
+
+ /* Miscellaneous commands */
+ #define CONFIG_CMD_BMODE
+ #define CONFIG_MXC_GPIO
+
+ /* Framebuffer and LCD */
+ #define CONFIG_VIDEO_IPUV3
+ #define CONFIG_SYS_CONSOLE_IS_IN_ENV
+ #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+ #define CONFIG_VIDEO_BMP_RLE8
+ #define CONFIG_SPLASH_SCREEN
+ #define CONFIG_SPLASH_SCREEN_ALIGN
+ #define CONFIG_BMP_16BPP
+ #define CONFIG_VIDEO_LOGO
+ #define CONFIG_VIDEO_BMP_LOGO
+ #define CONFIG_IPUV3_CLK 260000000
+ #define CONFIG_CMD_HDMIDETECT
+ #define CONFIG_CONSOLE_MUX
+ #define CONFIG_IMX_HDMI
+ #define CONFIG_IMX_VIDEO_SKIP
+ #define CONFIG_CMD_BMP
+
+ /* allow to overwrite serial and ethaddr */
+ #define CONFIG_ENV_OVERWRITE
+ #define CONFIG_CONS_INDEX 1
+ #define CONFIG_BAUDRATE 115200
+
+ /* Command definition */
+ #undef CONFIG_CMD_LOADB
+ #undef CONFIG_CMD_LOADS
+ #undef CONFIG_CMD_NFS
+ #undef CONFIG_CMD_FLASH
+
+ #undef CONFIG_IPADDR
+ #define CONFIG_IPADDR 192.168.10.2
+ #define CONFIG_NETMASK 255.255.255.0
+ #undef CONFIG_SERVERIP
+ #define CONFIG_SERVERIP 192.168.10.1
+
+ #define CONFIG_LOADADDR 0x12000000
+ #define CONFIG_SYS_TEXT_BASE 0x17800000
+
+ #ifdef CONFIG_CMD_MMC
+ #define CONFIG_DRIVE_MMC "mmc "
+ #else
+ #define CONFIG_DRIVE_MMC
+ #endif
+
+ #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_MMC
+
+ #define DFU_ALT_EMMC_INFO \
+ "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
+ "boot part 0 1;" \
+ "rootfs part 0 2;" \
+ "uImage fat 0 1;" \
+ "imx6q-colibri-eval-v3.dtb fat 0 1;" \
+ "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
+
+ #define EMMC_BOOTCMD \
+ "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
+ "rootwait\0" \
+ "emmcboot=run setup; " \
+ "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
+ "${vidargs}; echo Booting from internal eMMC chip...; " \
+ "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
+ "${boot_file} && run fdt_fixup && " \
+ "bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
+ "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+
+ #define MEM_LAYOUT_ENV_SETTINGS \
+ "fdt_addr_r=0x12000000\0" \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "kernel_addr_r=0x11000000\0" \
+ "ramdisk_addr_r=0x12100000\0"
+
+ #define NFS_BOOTCMD \
+ "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
+ "nfsboot=run setup; " \
+ "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
+ "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
+ "run nfsdtbload; dhcp ${kernel_addr_r} " \
+ "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
+ "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+
+ #define SD_BOOTCMD \
+ "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
+ "rootwait\0" \
+ "sdboot=run setup; " \
+ "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
+ "${vidargs}; echo Booting from SD card; " \
+ "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
+ "${boot_file} && run fdt_fixup && " \
+ "bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
+ "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+
+ #define USB_BOOTCMD \
+ "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
+ "rootwait\0" \
+ "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
+ "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
+ "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
+ "${boot_file} && run fdt_fixup && " \
+ "bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
+ "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+
+ #define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
+ "run nfsboot ; echo ; echo nfsboot failed ; " \
+ "usb start ;" \
+ "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
+ "boot_file=uImage\0" \
+ "console=ttymxc0\0" \
+ "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
+ "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
+ EMMC_BOOTCMD \
+ "fdt_file=" FDT_FILE "\0" \
+ "fdt_fixup=;\0" \
+ MEM_LAYOUT_ENV_SETTINGS \
+ NFS_BOOTCMD \
+ SD_BOOTCMD \
+ "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
+ "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
+ "flash_eth.img && source ${loadaddr}\0" \
+ "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
+ "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
+ "source ${loadaddr}\0" \
+ "setup=setenv setupargs fec_mac=${ethaddr} " \
+ "consoleblank=0 no_console_suspend=1 console=tty1 " \
+ "console=${console},${baudrate}n8\0 " \
+ "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
+ "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
+ "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
+ "source ${loadaddr}\0" \
+ "splashpos=m,m\0" \
+ "vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \
+ "video=mxcfb1:off fbmem=8M\0 "
+
+ /* Miscellaneous configurable options */
+ #define CONFIG_SYS_LONGHELP
+ #define CONFIG_AUTO_COMPLETE
+ #undef CONFIG_SYS_CBSIZE
+ #define CONFIG_SYS_CBSIZE 1024
+ #undef CONFIG_SYS_MAXARGS
+ #define CONFIG_SYS_MAXARGS 48
+
+ #define CONFIG_SYS_ALT_MEMTEST
+ #define CONFIG_SYS_MEMTEST_START 0x10000000
+ #define CONFIG_SYS_MEMTEST_END 0x10010000
+ #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
+
+ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+ #define CONFIG_CMDLINE_EDITING
+
+ /* Physical Memory Map */
+ #define CONFIG_NR_DRAM_BANKS 1
+ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+ #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+ #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+ #define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+ #define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+ /* FLASH and environment organization */
+ #define CONFIG_SYS_NO_FLASH
+
+ #define CONFIG_ENV_SIZE (8 * 1024)
+
+ #define CONFIG_ENV_IS_IN_MMC
+
+ #if defined(CONFIG_ENV_IS_IN_MMC)
+ /* Environment in eMMC, before config block at the end of 1st "boot sector" */
+ #define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \
+ CONFIG_TDX_CFG_BLOCK_OFFSET)
+ #define CONFIG_SYS_MMC_ENV_DEV 0
+ #define CONFIG_SYS_MMC_ENV_PART 1
+ #endif
+
+ #define CONFIG_OF_SYSTEM_SETUP
+
+ #define CONFIG_CMD_TIME
+
+ #define CONFIG_SUPPORT_RAW_INITRD
+
+ #define CONFIG_CRC32_VERIFY
+
+ #endif /* __CONFIG_H */
projects / u-boot.git / commitdiff
