rockchip: Use common bss and stack addresses on RK356x

Currently the following memory layout is typically used on RK356x:
[    0, 256K) - SPL binary
[ 256K,   2M) - TF-A / reserved
[   -X,   4M) - SPL pre-reloc stack (SPL_STACK)
[-128K,   4M)   - pre-reloc malloc heap (SPL_SYS_MALLOC_F_LEN)
[   -X,   6M) - SPL reloc stack (SPL_STACK_R_ADDR)
[   5M,   6M)   - reloc malloc heap (SPL_STACK_R_MALLOC_SIMPLE_LEN)
[  10M,   +X) - U-Boot proper binary (TEXT_BASE)
[   -X,  12M) - U-Boot proper pre-reloc stack (CUSTOM_SYS_INIT_SP_ADDR)
[-128K,  12M)   - pre-reloc malloc heap (SYS_MALLOC_F_LEN)
[  64M, +16K) - SPL bss (SPL_BSS_START_ADDR, SPL_BSS_MAX_SIZE)

SPL can safely load U-Boot proper + FDT to [10M, 12M-128K) with this
layout.

Migrate to use common bss, stack and malloc heap size and addresses to
remove this size limitation.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
(Update for pinetab2-rk3566_defconfig)
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

diff --git a/arch/arm/mach-rockchip/rk3568/Kconfig b/arch/arm/mach-rockchip/rk3568/Kconfig
index baa51349f4be3efa2ed74c3bfd9643089067e6f4..af537d912a6265f0191935f95d442e987dd226cb 100644 (file)
--- a/arch/arm/mach-rockchip/rk3568/Kconfig
+++ b/arch/arm/mach-rockchip/rk3568/Kconfig
@@ -38,8 +38,11 @@ config ROCKCHIP_STIMER_BASE
 config SYS_SOC
        default "rk3568"
 
-config SYS_MALLOC_F_LEN
-       default 0x20000
+config ROCKCHIP_COMMON_STACK_ADDR
+       default y
+
+config TEXT_BASE
+       default 0x00a00000
 
 source "board/rockchip/evb_rk3568/Kconfig"
 source "board/anbernic/rgxx3_rk3566/Kconfig"

diff --git a/configs/anbernic-rgxx3-rk3566_defconfig b/configs/anbernic-rgxx3-rk3566_defconfig
index ed6643d9d4fab590077b6425ca8851df1b2e917b..2b484fcaef5eaaf6c3f74395cf59c861a39f389f 100644 (file)
--- a/configs/anbernic-rgxx3-rk3566_defconfig
+++ b/configs/anbernic-rgxx3-rk3566_defconfig
@@ -2,22 +2,14 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_DEFAULT_DEVICE_TREE="rk3566-anbernic-rgxx3"
 CONFIG_ROCKCHIP_RK3568=y
 CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
 CONFIG_TARGET_ANBERNIC_RGXX3_RK3566=y
-CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0xc00800
@@ -34,13 +26,8 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_BOARD_RNG_SEED=y
 CONFIG_SPL_MAX_SIZE=0x20000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
 CONFIG_CMD_PWM=y
 CONFIG_CMD_GPT=y

diff --git a/configs/bpi-r2-pro-rk3568_defconfig b/configs/bpi-r2-pro-rk3568_defconfig
index e6e0e6fc6fa6218cdd235942f930833977831e83..5cc95241ba4330a0af8c765e3c6c841595baf61a 100644 (file)
--- a/configs/bpi-r2-pro-rk3568_defconfig
+++ b/configs/bpi-r2-pro-rk3568_defconfig
@@ -2,18 +2,10 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_DEFAULT_DEVICE_TREE="rk3568-bpi-r2-pro"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0xc00800
@@ -30,12 +22,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-bpi-r2-pro.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
 CONFIG_SYS_PROMPT="BPI-R2PRO> "
 CONFIG_CMD_GPIO=y

diff --git a/configs/evb-rk3568_defconfig b/configs/evb-rk3568_defconfig
index cb9b87ff12cb24cb2f3e7d7f204016d384e3aa02..6e8061f5f487582e916e951acbf74578a0a5a935 100644 (file)
--- a/configs/evb-rk3568_defconfig
+++ b/configs/evb-rk3568_defconfig
@@ -2,18 +2,10 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_DEFAULT_DEVICE_TREE="rk3568-evb"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0xc00800
@@ -28,12 +20,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-evb.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y

diff --git a/configs/generic-rk3568_defconfig b/configs/generic-rk3568_defconfig
index 8fb79c9b44032bc5af971489954bddc77d77f137..e7d5e55bbfd892fe0331022f606ed1f25d61817c 100644 (file)
--- a/configs/generic-rk3568_defconfig
+++ b/configs/generic-rk3568_defconfig
@@ -2,18 +2,10 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_DEFAULT_DEVICE_TREE="rk3568-generic"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0xc00800
@@ -28,12 +20,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-generic.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y

diff --git a/configs/lubancat-2-rk3568_defconfig b/configs/lubancat-2-rk3568_defconfig
index 80ae6ec3a2e9478b57b547fb1a197a4a4051245a..1c50a0ccbe60ae4302d7753ea3ea3c1c161bff43 100644 (file)
--- a/configs/lubancat-2-rk3568_defconfig
+++ b/configs/lubancat-2-rk3568_defconfig
@@ -2,18 +2,10 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_DEFAULT_DEVICE_TREE="rk3568-lubancat-2"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0xc00800
@@ -28,12 +20,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-lubancat-2.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y

diff --git a/configs/nanopi-r5c-rk3568_defconfig b/configs/nanopi-r5c-rk3568_defconfig
index f5a472d03d786d36810c718ce205ee5c1e411974..0f1a9461a0ce8e9acbdb56f93d9e597e6f995184 100644 (file)
--- a/configs/nanopi-r5c-rk3568_defconfig
+++ b/configs/nanopi-r5c-rk3568_defconfig
@@ -3,18 +3,10 @@ CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_SYS_HAS_NONCACHED_MEMORY=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_DEFAULT_DEVICE_TREE="rk3568-nanopi-r5c"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0xc00800
@@ -30,12 +22,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-nanopi-r5c.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y

diff --git a/configs/nanopi-r5s-rk3568_defconfig b/configs/nanopi-r5s-rk3568_defconfig
index 99692d341f44e9a0a3b406e91b2e40332fdffac7..4ebf0cc9ee88c77f7231be4ed6b5fd8725fb6d34 100644 (file)
--- a/configs/nanopi-r5s-rk3568_defconfig
+++ b/configs/nanopi-r5s-rk3568_defconfig
@@ -3,18 +3,10 @@ CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_SYS_HAS_NONCACHED_MEMORY=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_DEFAULT_DEVICE_TREE="rk3568-nanopi-r5s"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0xc00800
@@ -30,12 +22,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-nanopi-r5s.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y

diff --git a/configs/odroid-m1-rk3568_defconfig b/configs/odroid-m1-rk3568_defconfig
index 3130e341e776b91117638bbc3d274c5f85159cee..b5ed9e4bc98e5a8f0cbb2318613ef566361e82fe 100644 (file)
--- a/configs/odroid-m1-rk3568_defconfig
+++ b/configs/odroid-m1-rk3568_defconfig
@@ -2,22 +2,14 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_SF_DEFAULT_SPEED=24000000
 CONFIG_SF_DEFAULT_MODE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="rk3568-odroid-m1"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
 CONFIG_TARGET_ODROID_M1_RK3568=y
-CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -36,12 +28,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-odroid-m1.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
 CONFIG_SPL_ATF=y

diff --git a/configs/pinetab2-rk3566_defconfig b/configs/pinetab2-rk3566_defconfig
index 19b396eef9753f4897ee07b71eafcbd65dfd57ee..bc7a77aa52fd5aab9dd91a013073a3b05750dd0f 100644 (file)
--- a/configs/pinetab2-rk3566_defconfig
+++ b/configs/pinetab2-rk3566_defconfig
@@ -2,24 +2,15 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
 CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
-CONFIG_SF_DEFAULT_SPEED=24000000
 CONFIG_SF_DEFAULT_MODE=0x1000
 CONFIG_DEFAULT_DEVICE_TREE="rk3566-pinetab2-v2.0"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
 CONFIG_TARGET_QUARTZ64_RK3566=y
-CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -36,12 +27,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-pinetab2-v2.0.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_SPI_LOAD=y

diff --git a/configs/quartz64-a-rk3566_defconfig b/configs/quartz64-a-rk3566_defconfig
index ade08867f60f99cd73e70f21ffde53dc31f913bb..fef80439d89bc1b33fcd56c6500c28442bf8a460 100644 (file)
--- a/configs/quartz64-a-rk3566_defconfig
+++ b/configs/quartz64-a-rk3566_defconfig
@@ -2,23 +2,15 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
 CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_SF_DEFAULT_SPEED=24000000
 CONFIG_SF_DEFAULT_MODE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="rk3566-quartz64-a"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
 CONFIG_TARGET_QUARTZ64_RK3566=y
-CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -37,12 +29,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-quartz64-a.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000

diff --git a/configs/quartz64-b-rk3566_defconfig b/configs/quartz64-b-rk3566_defconfig
index 8d01db54407ddd1b883fe7f5228900e1d805d771..bb541ed1af63cd74427b0060cb46c103bf52ce5d 100644 (file)
--- a/configs/quartz64-b-rk3566_defconfig
+++ b/configs/quartz64-b-rk3566_defconfig
@@ -2,22 +2,14 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_SF_DEFAULT_SPEED=24000000
 CONFIG_SF_DEFAULT_MODE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="rk3566-quartz64-b"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
 CONFIG_TARGET_QUARTZ64_RK3566=y
-CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -36,12 +28,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-quartz64-b.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
 CONFIG_SPL_ATF=y

diff --git a/configs/radxa-cm3-io-rk3566_defconfig b/configs/radxa-cm3-io-rk3566_defconfig
index 4b606dcb8e94efdc5f5fd445b0ca72a6561256f0..bf61db44d3a4ab0167e7e02fa7cf1184ae105b74 100644 (file)
--- a/configs/radxa-cm3-io-rk3566_defconfig
+++ b/configs/radxa-cm3-io-rk3566_defconfig
@@ -2,18 +2,10 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_DEFAULT_DEVICE_TREE="rk3566-radxa-cm3-io"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0xc00800
@@ -28,12 +20,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-radxa-cm3-io.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y

diff --git a/configs/radxa-e25-rk3568_defconfig b/configs/radxa-e25-rk3568_defconfig
index fedb137877ab23ba584981679b83028831e8887d..43aa8ec20e4823984325f5efb46e795bf6969320 100644 (file)
--- a/configs/radxa-e25-rk3568_defconfig
+++ b/configs/radxa-e25-rk3568_defconfig
@@ -3,18 +3,10 @@ CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_SYS_HAS_NONCACHED_MEMORY=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_DEFAULT_DEVICE_TREE="rk3568-radxa-e25"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0xc00800
@@ -31,12 +23,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-radxa-e25.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y

diff --git a/configs/rock-3a-rk3568_defconfig b/configs/rock-3a-rk3568_defconfig
index 18372a570eb75ee31646975c6754308045fa83c8..c161bc974fb03abce408ed9810ebbf062657e47c 100644 (file)
--- a/configs/rock-3a-rk3568_defconfig
+++ b/configs/rock-3a-rk3568_defconfig
@@ -2,21 +2,13 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_SF_DEFAULT_SPEED=24000000
 CONFIG_SF_DEFAULT_MODE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="rk3568-rock-3a"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
-CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -35,12 +27,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-rock-3a.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
 CONFIG_SPL_ATF=y

diff --git a/configs/soquartz-blade-rk3566_defconfig b/configs/soquartz-blade-rk3566_defconfig
index 9693cc2f9eb986fac54ea2c37e028a438e6d4e41..b9ac6b9f33d5e821c25245ae56738a664fb083e7 100644 (file)
--- a/configs/soquartz-blade-rk3566_defconfig
+++ b/configs/soquartz-blade-rk3566_defconfig
@@ -2,19 +2,11 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_DEFAULT_DEVICE_TREE="rk3566-soquartz-blade"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
 CONFIG_TARGET_QUARTZ64_RK3566=y
-CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0xc00800
@@ -31,12 +23,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-soquartz-blade.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y

diff --git a/configs/soquartz-cm4-rk3566_defconfig b/configs/soquartz-cm4-rk3566_defconfig
index 9c6b12d23028a70084c0168ae26e1e3e809941c5..e87a6392c52734ccc4270aa75e6eec5fcdd4deb9 100644 (file)
--- a/configs/soquartz-cm4-rk3566_defconfig
+++ b/configs/soquartz-cm4-rk3566_defconfig
@@ -2,19 +2,11 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_DEFAULT_DEVICE_TREE="rk3566-soquartz-cm4"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
 CONFIG_TARGET_QUARTZ64_RK3566=y
-CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0xc00800
@@ -31,12 +23,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-soquartz-cm4.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y

diff --git a/configs/soquartz-model-a-rk3566_defconfig b/configs/soquartz-model-a-rk3566_defconfig
index fd72d78a47a896db2c3f1fd401deda080a8ad2bd..b2c1684515e83988fe7778f62194d1f929a6d137 100644 (file)
--- a/configs/soquartz-model-a-rk3566_defconfig
+++ b/configs/soquartz-model-a-rk3566_defconfig
@@ -2,19 +2,11 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00a00000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_DEFAULT_DEVICE_TREE="rk3566-soquartz-model-a"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
 CONFIG_SPL_SERIAL=y
-CONFIG_SPL_STACK_R_ADDR=0x600000
 CONFIG_TARGET_QUARTZ64_RK3566=y
-CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0xc00800
@@ -31,12 +23,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-soquartz-model-a.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x4000000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y