Many includes were not removed when code parts were moved or removed.
Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
#include <asm/gpio.h>
#include <asm/arch/imx8-pins.h>
#include <asm/arch/iomux.h>
-#include <firmware/imx/sci/sci.h>
#include <asm/arch/sys_proto.h>
#ifndef CONFIG_SPL
#include <asm/arch-imx8/clock.h>
* Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
*/
-#include <common.h>
#include <command.h>
-#include <env.h>
-#include <errno.h>
-#include <init.h>
-#include <malloc.h>
#include <serial.h>
-#include <spl.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/ddr_defs.h>
+#include <watchdog.h>
#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/emif.h>
#include <asm/gpio.h>
-#include <miiphy.h>
-#include <cpsw.h>
-#include <watchdog.h>
#include <asm/mach-types.h>
#include "board_am335x.h"
#include "eeprom.h"
#if !defined(CONFIG_SPL_BUILD)
-#include <common.h>
#include <env.h>
-#include <dm.h>
-#include <env_internal.h>
-#include <i2c.h>
-#include <log.h>
+#include <g_dnl.h>
+#include <net.h>
#include <asm/io.h>
#if !CONFIG_IS_ENABLED(TARGET_GIEDI) && !CONFIG_IS_ENABLED(TARGET_DENEB)
#include <asm/arch/cpu.h>
#endif
-#include <asm/arch/sys_proto.h>
-#include <asm/unaligned.h>
-#include <net.h>
-#include <errno.h>
-#include <g_dnl.h>
#include "eeprom.h"
#include "factoryset.h"
* Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
*/
-#include <common.h>
#include <command.h>
+#include <cpsw.h>
#include <env.h>
-#include <errno.h>
#include <init.h>
-#include <net.h>
-#include <spl.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/ddr_defs.h>
+#include <linux/delay.h>
+#include <nand.h>
#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/sys_proto.h>
+#include <asm/arch/ddr_defs.h>
#include <asm/arch/mem.h>
-#include <asm/io.h>
-#include <asm/emif.h>
+#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
-#include <i2c.h>
-#include <miiphy.h>
-#include <cpsw.h>
-#include <watchdog.h>
-#include <linux/delay.h>
+#include <asm/io.h>
#include "board.h"
#include "../common/eeprom.h"
#include "../common/factoryset.h"
-#include <nand.h>
#ifdef CONFIG_SPL_BUILD
static struct draco_baseboard_id __section(".data") settings;
* Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
*/
-#include <common.h>
+#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/hardware.h>
#include <asm/arch/mux.h>
-#include <asm/io.h>
-#include <i2c.h>
#include "eeprom.h"
static struct module_pin_mux uart0_pin_mux[] = {
* Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
*/
-#include <common.h>
+#include <cpsw.h>
#include <env.h>
-#include <errno.h>
+#include <i2c.h>
#include <init.h>
-#include <log.h>
-#include <malloc.h>
+#include <nand.h>
#include <net.h>
-#include <spl.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/ddr_defs.h>
#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/ddr_defs.h>
#include <asm/arch/sys_proto.h>
-#include <asm/io.h>
-#include <asm/emif.h>
#include <asm/gpio.h>
-#include <i2c.h>
-#include <miiphy.h>
-#include <cpsw.h>
-#include <watchdog.h>
+#include <asm/io.h>
+#include "pmic.h"
#include "../common/board_am335x.h"
#include "../common/eeprom.h"
#include "../common/factoryset.h"
-#include "pmic.h"
-#include <nand.h>
-#include <bmp_layout.h>
#ifdef CONFIG_SPL_BUILD
void draco_init_ddr(void)
* Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
*/
-#include <common.h>
+#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/hardware.h>
#include <asm/arch/mux.h>
-#include <asm/io.h>
-#include <i2c.h>
#include "eeprom.h"
static struct module_pin_mux uart0_pin_mux[] = {
* Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
*/
-#include <common.h>
+#include <cpsw.h>
#include <env.h>
-#include <errno.h>
#include <init.h>
-#include <malloc.h>
-#include <net.h>
-#include <spi.h>
-#include <spl.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/ddr_defs.h>
+#include <linux/delay.h>
+#include <nand.h>
#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/ddr_defs.h>
#include <asm/arch/sys_proto.h>
-#include <asm/io.h>
-#include <asm/emif.h>
#include <asm/gpio.h>
-#include <i2c.h>
-#include <miiphy.h>
-#include <cpsw.h>
-#include <video.h>
-#include <watchdog.h>
-#include <linux/delay.h>
+#include <asm/io.h>
#include "../common/board_am335x.h"
#include "../common/eeprom.h"
#include "../common/factoryset.h"
* Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
*/
-#include <common.h>
+#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/hardware.h>
#include <asm/arch/mux.h>
-#include <asm/io.h>
-#include <i2c.h>
static struct module_pin_mux uart0_pin_mux[] = {
{OFFSET(uart0_rxd), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* UART0_RXD */