mx6sabresd: Remove board_phy_config()

With Ethernet DM in place, there is no longer the need for having
the board_phy_config() anymore.

Remove it.

Confirmed that TFTP transfer still works fine without board_phy_config().

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>

diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index b558a596dff8a9c225c1eb0d0b67d90a73dc4930..bb066a5d36c348a2295af4bf9f3f3cfe65cc0fcd 100644 (file)
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -7,7 +7,6 @@
 
 #include <image.h>
 #include <init.h>
-#include <net.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/iomux.h>
@@ -254,39 +253,6 @@ int board_mmc_init(struct bd_info *bis)
 }
 #endif
 
-static int ar8031_phy_fixup(struct phy_device *phydev)
-{
-       unsigned short val;
-
-       /* To enable AR8031 ouput a 125MHz clk from CLK_25M */
-       phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
-       phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
-       phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
-
-       val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
-       val &= 0xffe3;
-       val |= 0x18;
-       phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
-
-       /* introduce tx clock delay */
-       phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
-       val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
-       val |= 0x0100;
-       phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
-
-       return 0;
-}
-
-int board_phy_config(struct phy_device *phydev)
-{
-       ar8031_phy_fixup(phydev);
-
-       if (phydev->drv->config)
-               phydev->drv->config(phydev);
-
-       return 0;
-}
-
 #if defined(CONFIG_VIDEO_IPUV3)
 static void disable_lvds(struct display_info_t const *dev)
 {