pico-imx7d: Increase ODT resistor value

Increase ODT resistor value from 60 to 120 ohm to improve DRAM stability.

Based on the following commit from TechNexion U-Boot:
https://github.com/TechNexion/u-boot-tn-imx/commit/8a00e57b697c6f7d3d3abcfc552550ac7d8cc96d

Signed-off-by: Ray Chang <ray.chang@technexion.com>
Signed-off-by: Benjamin Szőke <egyszeregy@freemail.hu>

diff --git a/board/technexion/pico-imx7d/spl.c b/board/technexion/pico-imx7d/spl.c
index cb60d3be420684bc5b0d60da518caf2cc0abfa9e..fc97c58ae167664d944b78fafcb22aec7cc07993 100644 (file)
--- a/board/technexion/pico-imx7d/spl.c
+++ b/board/technexion/pico-imx7d/spl.c
@@ -89,11 +89,11 @@ static struct ddr_phy ddr_phy_regs_val = {
 static struct mx7_calibration calib_param = {
        .num_val        = 5,
        .values         = {
-               0x0E407304,
-               0x0E447304,
-               0x0E447306,
-               0x0E447304,
-               0x0E447304,
+               0x0E207304,
+               0x0E247304,
+               0x0E247306,
+               0x0E247304,
+               0x0E207304,
        },
 };