This only takes effect if the memory commands are activated
globally (CONFIG_CMD_MEMORY).
-- CONFIG_SPL_BUILD
+- CONFIG_XPL_BUILD
Set when the currently running compilation is for an artifact
that will end up in one of the 'xPL' builds, i.e. SPL, TPL or
VPL. Code that needs phase-specific behaviour can check this,
or (where possible) use xpl_phase() instead.
- Note that CONFIG_SPL_BUILD *is* always defined when either
+ Note that CONFIG_XPL_BUILD *is* always defined when either
of CONFIG_TPL_BUILD / CONFIG_VPL_BUILD is defined. This can be
counter-intuitive and should perhaps be changed.
# (C) Copyright 2004-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifndef CONFIG_SPL_BUILD
+ifndef CONFIG_XPL_BUILD
obj-$(CONFIG_BOOT_RETRY) += bootretry.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o bootm_os.o
return true;
}
-#if !defined(CONFIG_SPL_BUILD)
+#if !defined(CONFIG_XPL_BUILD)
static void android_dt_print_fdt_info(const struct fdt_header *fdt)
{
u32 fdt_size;
return false;
}
-#if !defined(CONFIG_SPL_BUILD)
+#if !defined(CONFIG_XPL_BUILD)
/**
* android_print_contents - prints out the contents of the Android format image
* @hdr: pointer to the Android format image header
* Use malloc() except in SPL (to save code size). In SPL the caller
* must allocate the array.
*/
- if (!IS_ENABLED(CONFIG_SPL_BUILD) && !region)
+ if (!IS_ENABLED(CONFIG_XPL_BUILD) && !region)
region = calloc(sizeof(*region), count);
if (!region)
return NULL;
# (C) Copyright 2004-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifndef CONFIG_SPL_BUILD
+ifndef CONFIG_XPL_BUILD
# core command
obj-y += boot.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o
obj-$(CONFIG_ARCH_KEYSTONE) += ti/
obj-$(CONFIG_ARCH_K3) += ti/
obj-$(CONFIG_ARCH_OMAP2PLUS) += ti/
-endif # !CONFIG_SPL_BUILD
+endif # !CONFIG_XPL_BUILD
obj-$(CONFIG_$(SPL_)CMD_TLV_EEPROM) += tlv_eeprom.o
*/
#define MAX_ENV_SIZE (1 << 20) /* 1 MiB */
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
/*
* Command interface: print one or all environment variables
*
return 0;
}
#endif
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static int do_env_set(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
{
}
#endif
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
static int do_env_default(struct cmd_tbl *cmdtp, int flag,
int argc, char *const argv[])
{
var_complete
);
#endif
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
# core
-ifndef CONFIG_SPL_BUILD
+ifndef CONFIG_XPL_BUILD
obj-y += init/
obj-y += main.o
obj-y += exports.o
obj-$(CONFIG_UPDATE_COMMON) += update.o
obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o
-endif # !CONFIG_SPL_BUILD
+endif # !CONFIG_XPL_BUILD
obj-$(CONFIG_$(SPL_TPL_)BOOTSTAGE) += bootstage.o
obj-$(CONFIG_$(SPL_TPL_)BLOBLIST) += bloblist.o
-ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_XPL_BUILD
ifdef CONFIG_SPL_DFU
obj-$(CONFIG_DFU_OVER_USB) += dfu.o
endif
obj-$(CONFIG_SPL_MUSB_NEW) += usb.o
obj-$(CONFIG_SPL_SPLASH_SCREEN) += splash.o
obj-$(CONFIG_SPL_SPLASH_SOURCE) += splash_source.o
-endif # CONFIG_SPL_BUILD
+endif # CONFIG_XPL_BUILD
#others
obj-$(CONFIG_DDR_SPD) += ddr_spd.o
#define getcmd_getch() getchar()
#define getcmd_cbeep() getcmd_putch('\a')
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#define HIST_MAX 3
#define HIST_SIZE 32
#else
/* Assign the new device (leaving the existing one started) */
stdio_devices[file] = dev;
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
/*
* Update monitor functions
* (to use the console stuff by other applications)
return 0;
}
-#if !defined(CONFIG_SPL_BUILD) && (defined(CONFIG_CMD_HASH) || \
+#if !defined(CONFIG_XPL_BUILD) && (defined(CONFIG_CMD_HASH) || \
defined(CONFIG_CMD_SHA1SUM) || defined(CONFIG_CMD_CRC32)) || \
defined(CONFIG_CMD_MD5SUM)
/**
# Based on common/Makefile.
#
-ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_XPL_BUILD
obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o
obj-$(CONFIG_$(SPL_TPL_)BOOTROM_SUPPORT) += spl_bootrom.o
obj-$(CONFIG_$(SPL_TPL_)LOAD_FIT) += spl_fit.o
}
}
-#if defined(CONFIG_CMD_UBIFS) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_CMD_UBIFS) && !defined(CONFIG_XPL_BUILD)
static int splash_mount_ubifs(struct splash_location *location)
{
int res;
ARCH := $(CONFIG_SYS_ARCH:"%"=%)
CPU := $(CONFIG_SYS_CPU:"%"=%)
-ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_XPL_BUILD
ifdef CONFIG_ARCH_TEGRA
CPU := arm720t
endif
}
#endif
-#if IS_ENABLED(CONFIG_CMD_UBIFS) && !IS_ENABLED(CONFIG_SPL_BUILD)
+#if IS_ENABLED(CONFIG_CMD_UBIFS) && !IS_ENABLED(CONFIG_XPL_BUILD)
/*
* Special-case ubi, ubi goes through a mtd, rather than through
* a regular block device.
static int part_test_dos(struct blk_desc *desc)
{
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
ALLOC_CACHE_ALIGN_BUFFER(legacy_mbr, mbr,
DIV_ROUND_UP(desc->blksz, sizeof(legacy_mbr)));
In your board configuration file, include the following::
- #ifndef CONFIG_SPL_BUILD
+ #ifndef CONFIG_XPL_BUILD
#include <config_distro_bootcmd.h>
#endif
configuration, simply define macro BOOT_TARGET_DEVICES prior to including
<config_distro_bootcmd.h>. For example::
- #ifndef CONFIG_SPL_BUILD
+ #ifndef CONFIG_XPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
func(MMC, mmc, 0) \
Look for moved config options in spl/include/autoconf.mk instead of
include/autoconf.mk. This is useful for moving options for SPL build
because SPL related options (mostly prefixed with CONFIG_SPL\_) are
- sometimes blocked by CONFIG_SPL_BUILD ifdef conditionals.
+ sometimes blocked by CONFIG_XPL_BUILD ifdef conditionals.
-j, --jobs
Specify the number of threads to run simultaneously. If not specified,
source files are built. For sandbox_spl, the of_platdata tests are built
because of the build rule in test/dm/Makefile::
- ifeq ($(CONFIG_SPL_BUILD),y)
+ ifeq ($(CONFIG_XPL_BUILD),y)
obj-$(CONFIG_SPL_OF_PLATDATA) += of_platdata.o
else
...other tests for non-spl
arch-dtbs:
$(Q)$(MAKE) $(build)=$(dt_dir) dtbs
-ifeq ($(CONFIG_SPL_BUILD),y)
+ifeq ($(CONFIG_XPL_BUILD),y)
obj-$(CONFIG_OF_EMBED) := dt-spl.dtb.o
# support "out-of-tree" build for dtb-spl
$(obj)/dt-spl.dtb.o: $(obj)/dt-spl.dtb.S FORCE
obj-$(CONFIG_$(SPL_TPL_)ENV_SUPPORT) += attr.o
obj-$(CONFIG_$(SPL_TPL_)ENV_SUPPORT) += flags.o
-ifndef CONFIG_SPL_BUILD
+ifndef CONFIG_XPL_BUILD
obj-y += callback.o
obj-$(CONFIG_ENV_IS_IN_EEPROM) += eeprom.o
obj-$(CONFIG_ENV_IS_IN_EEPROM) += embedded.o
debug("Initial value for argc=%d\n", argc);
-#if !IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_CMD_NVEDIT_EFI)
+#if !IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_CMD_NVEDIT_EFI)
if (argc > 1 && argv[1][0] == '-' && argv[1][1] == 'e')
return do_env_set_efi(NULL, flag, --argc, ++argv);
#endif
void env_relocate(void)
{
if (gd->env_valid == ENV_INVALID) {
-#if defined(CONFIG_ENV_IS_NOWHERE) || defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_ENV_IS_NOWHERE) || defined(CONFIG_XPL_BUILD)
/* Environment not changable */
env_set_default(NULL, 0);
#else
#include <asm/global_data.h>
#include <linux/stddef.h>
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* TODO(sjg@chromium.org): Figure out why this is needed */
# if !defined(CONFIG_TARGET_AM335X_EVM) || defined(CONFIG_SPL_OS_BOOT)
# define LOADENV
if (!strcmp(ifname, "mmc"))
mmc_initialize(NULL);
#endif
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#if defined(CONFIG_AHCI) || defined(CONFIG_SCSI)
if (!strcmp(CONFIG_ENV_FAT_INTERFACE, "scsi"))
scsi_scan(true);
DECLARE_GLOBAL_DATA_PTR;
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
# if defined(CONFIG_CMD_SAVEENV) && defined(CONFIG_CMD_FLASH)
# include <flash.h>
# define CMD_SAVEENV
#if (!defined(CONFIG_MICROBLAZE) && !defined(CONFIG_ARCH_ZYNQ) && \
!defined(CONFIG_TARGET_MCCMON6) && !defined(CONFIG_TARGET_X600) && \
!defined(CONFIG_TARGET_EDMINIV2)) || \
- !defined(CONFIG_SPL_BUILD)
+ !defined(CONFIG_XPL_BUILD)
#define LOADENV
#endif
-#if !defined(CONFIG_TARGET_X600) || !defined(CONFIG_SPL_BUILD)
+#if !defined(CONFIG_TARGET_X600) || !defined(CONFIG_XPL_BUILD)
#define INITENV
#endif
mmc_set_env_part_restore(mmc);
}
-#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_XPL_BUILD)
static inline int write_env(struct mmc *mmc, unsigned long size,
unsigned long offset, const void *buffer)
{
fini_mmc_for_env(mmc);
return ret;
}
-#endif /* CONFIG_CMD_SAVEENV && !CONFIG_SPL_BUILD */
+#endif /* CONFIG_CMD_SAVEENV && !CONFIG_XPL_BUILD */
static inline int read_env(struct mmc *mmc, unsigned long size,
unsigned long offset, const void *buffer)
.location = ENVL_MMC,
ENV_NAME("MMC")
.load = env_mmc_load,
-#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_XPL_BUILD)
.save = env_save_ptr(env_mmc_save),
.erase = ENV_ERASE_PTR(env_mmc_erase)
#endif
#include <u-boot/crc.h>
#if defined(CONFIG_CMD_SAVEENV) && defined(CONFIG_CMD_NAND) && \
- !defined(CONFIG_SPL_BUILD)
+ !defined(CONFIG_XPL_BUILD)
#define CMD_SAVEENV
-#elif defined(CONFIG_ENV_OFFSET_REDUND) && !defined(CONFIG_SPL_BUILD)
+#elif defined(CONFIG_ENV_OFFSET_REDUND) && !defined(CONFIG_XPL_BUILD)
#error CONFIG_ENV_OFFSET_REDUND must have CONFIG_CMD_SAVEENV & CONFIG_CMD_NAND
#endif
}
#endif /* CMD_SAVEENV */
-#if defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_XPL_BUILD)
static int readenv(size_t offset, u_char *buf)
{
return nand_spl_load_image(offset, CONFIG_ENV_SIZE, buf);
return 0;
}
-#endif /* #if defined(CONFIG_SPL_BUILD) */
+#endif /* #if defined(CONFIG_XPL_BUILD) */
#ifdef CONFIG_ENV_OFFSET_OOB
int get_nand_env_oob(struct mtd_info *mtd, unsigned long *result)
* searches default_environment array in that case.
* For U-Boot proper, import the default environment to allow reload.
*/
- if (!IS_ENABLED(CONFIG_SPL_BUILD))
+ if (!IS_ENABLED(CONFIG_XPL_BUILD))
env_set_default(NULL, 0);
gd->env_valid = ENV_INVALID;
__weak void *env_sf_get_env_addr(void)
{
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
return (void *)CONFIG_ENV_ADDR;
#else
return NULL;
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
# Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
-ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_XPL_BUILD
obj-$(CONFIG_FS_LOADER) += fs.o
obj-$(CONFIG_SPL_FS_FAT) += fat/
obj-$(CONFIG_SPL_FS_EXT4) += ext4/
.mkdir = fs_mkdir_unsupported,
},
#endif
-#if IS_ENABLED(CONFIG_SANDBOX) && !IS_ENABLED(CONFIG_SPL_BUILD)
+#if IS_ENABLED(CONFIG_SANDBOX) && !IS_ENABLED(CONFIG_XPL_BUILD)
{
.fstype = FS_TYPE_SANDBOX,
.name = "sandbox",
.ln = fs_ln_unsupported,
},
#endif
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#ifdef CONFIG_CMD_UBIFS
{
.fstype = FS_TYPE_UBIFS,
},
#endif
#endif
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#ifdef CONFIG_FS_BTRFS
{
.fstype = FS_TYPE_BTRFS,
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifndef CONFIG_SPL_BUILD
+ifndef CONFIG_XPL_BUILD
obj-$(CONFIG_EFI) += efi/
obj-$(CONFIG_EFI_LOADER) += efi_driver/
obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += libfdt/
obj-$(CONFIG_$(SPL_TPL_)OF_REAL) += fdtdec_common.o fdtdec.o
-ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_XPL_BUILD
obj-$(CONFIG_SPL_YMODEM_SUPPORT) += crc16-ccitt.o
obj-$(CONFIG_$(SPL_TPL_)HASH) += crc16-ccitt.o
obj-$(CONFIG_MMC_SPI_CRC_ON) += crc16-ccitt.o
obj-$(CONFIG_LIB_RAND) += rand.o
obj-y += panic.o
-ifeq ($(CONFIG_SPL_BUILD),y)
+ifeq ($(CONFIG_XPL_BUILD),y)
# SPL U-Boot may use full-printf, tiny-printf or none at all
ifdef CONFIG_$(SPL_TPL_)USE_TINY_PRINTF
obj-$(CONFIG_$(SPL_TPL_)SPRINTF) += tiny-printf.o
rsa_helper.o
$(obj)/rsapubkey.asn1.o: $(obj)/rsapubkey.asn1.c $(obj)/rsapubkey.asn1.h
-ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_XPL_BUILD
CFLAGS_rsapubkey.asn1.o += -I$(obj)
endif
$(obj)/rsa_helper.o: $(obj)/rsapubkey.asn1.h
-ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_XPL_BUILD
CFLAGS_rsa_helper.o += -I$(obj)
endif
addr += thislinelen * width;
count -= thislinelen;
- if (!IS_ENABLED(CONFIG_SPL_BUILD) && ctrlc())
+ if (!IS_ENABLED(CONFIG_XPL_BUILD) && ctrlc())
return -EINTR;
}
if (IS_ENABLED(CONFIG_SANDBOX))
return NULL;
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* FDT is at end of BSS unless it is in a different memory region */
if (IS_ENABLED(CONFIG_SPL_SEPARATE_BSS))
fdt_blob = (ulong *)_image_binary_end;
}
/* Allow the early environment to override the fdt address */
- if (!IS_ENABLED(CONFIG_SPL_BUILD)) {
+ if (!IS_ENABLED(CONFIG_XPL_BUILD)) {
ulong addr;
addr = env_get_hex("fdtcontroladdr", 0);
*/
void hang(void)
{
-#if !defined(CONFIG_SPL_BUILD) || \
+#if !defined(CONFIG_XPL_BUILD) || \
(CONFIG_IS_ENABLED(LIBCOMMON_SUPPORT) && \
CONFIG_IS_ENABLED(SERIAL))
puts("### ERROR ### Please RESET the board ###\n");
do_callback(const struct env_entry *e, const char *name, const char *value,
enum env_op op, int flags)
{
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
if (e->callback)
return e->callback(name, value, op, flags);
#endif
return 0;
}
-#if !(defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SAVEENV))
+#if !(defined(CONFIG_XPL_BUILD) && !defined(CONFIG_SPL_SAVEENV))
/*
* hexport()
*/
printf("%s%s\n", prefix_str, linebuf);
break;
}
- if (!IS_ENABLED(CONFIG_SPL_BUILD) && ctrlc())
+ if (!IS_ENABLED(CONFIG_XPL_BUILD) && ctrlc())
return -EINTR;
}
uuid_bin_to_str(uuid_bin, uuid_str, str_format);
}
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_CMD_UUID)
+#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_CMD_UUID)
int do_uuid(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
{
char uuid[UUID_STR_LEN + 1];
char *vci = NULL;
char *env_vci = env_get("bootp_vci");
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_NET_VCI_STRING)
+#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_NET_VCI_STRING)
vci = CONFIG_SPL_NET_VCI_STRING;
#elif defined(CONFIG_BOOTP_VCI_STRING)
vci = CONFIG_BOOTP_VCI_STRING;
*/
void net_auto_load(void)
{
-#if defined(CONFIG_CMD_NFS) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_CMD_NFS) && !defined(CONFIG_XPL_BUILD)
const char *s = env_get("autoload");
if (s != NULL && strcmp(s, "NFS") == 0) {
ping6_start();
break;
#endif
-#if defined(CONFIG_CMD_NFS) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_CMD_NFS) && !defined(CONFIG_XPL_BUILD)
case NFS:
nfs_start();
break;
cdp_start();
break;
#endif
-#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_XPL_BUILD)
case NETCONS:
nc_start();
break;
}
}
-#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_XPL_BUILD)
nc_input_packet((uchar *)ip + IP_UDP_HDR_SIZE,
src_ip,
ntohs(ip->udp_dst),
# do not delete intermediate files automatically
.SECONDARY:
-ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_XPL_BUILD
SPL_ := SPL_
ifeq ($(CONFIG_VPL_BUILD),y)
SPL_TPL_ := VPL_
export SPL_NAME
-ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_XPL_BUILD
SPL_ := SPL_
ifeq ($(CONFIG_VPL_BUILD),y)
SPL_TPL_ := VPL_
obj-$(CONFIG_UT_TIME) += time_ut.o
obj-y += ut.o
-ifeq ($(CONFIG_SPL_BUILD),)
+ifeq ($(CONFIG_XPL_BUILD),)
obj-y += boot/
obj-$(CONFIG_UNIT_TEST) += common/
obj-y += log/
"\ntime - very basic test of time functions"
#endif
#if defined(CONFIG_UT_UNICODE) && \
- !defined(CONFIG_SPL_BUILD) && !defined(API_BUILD)
+ !defined(CONFIG_XPL_BUILD) && !defined(API_BUILD)
"\nunicode - Unicode functions"
#endif
);
# Tests for particular subsystems - when enabling driver model for a new
# subsystem you must add sandbox tests here.
-ifeq ($(CONFIG_SPL_BUILD),y)
+ifeq ($(CONFIG_XPL_BUILD),y)
obj-$(CONFIG_SPL_OF_PLATDATA) += of_platdata.o
else
obj-$(CONFIG_UT_DM) += bus.o
#
# (C) Copyright 2018
# Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
-ifeq ($(CONFIG_SPL_BUILD),)
+ifeq ($(CONFIG_XPL_BUILD),)
obj-y += cmd_ut_lib.o
obj-y += abuf.o
obj-y += alist.o
static enum fdtchk_t fdt_action(void)
{
/* For sandbox SPL builds, do nothing */
- if (IS_ENABLED(CONFIG_SANDBOX) && IS_ENABLED(CONFIG_SPL_BUILD))
+ if (IS_ENABLED(CONFIG_SANDBOX) && IS_ENABLED(CONFIG_XPL_BUILD))
return FDTCHK_NONE;
/* Do a copy for sandbox (but only the U-Boot build, not SPL) */
#define CONFIG_BINMAN 1
-#define CONFIG_SPL_BUILD 1
+#define CONFIG_XPL_BUILD 1
#define CONFIG_SPL_BINMAN_SYMBOLS 1