From: Michal Suchanek Date: Sun, 25 Sep 2022 13:28:47 +0000 (+0200) Subject: dm: doc: Fix serial howto u-boot,dm-pre-reloc typo X-Git-Tag: v2025.01-rc5-pxa1908~1230^2~21 X-Git-Url: http://git.dujemihanovic.xyz/html/static/%7B%7B%20.RelPermalink%20%7D%7D?a=commitdiff_plain;h=f7d367c2e66ec550976818b8297416f2e4e299ce;p=u-boot.git dm: doc: Fix serial howto u-boot,dm-pre-reloc typo In a couple of places the document says u-boot,pre-reloc but all examples show u-boot,dm-pre-reloc, use the latter consistently. Signed-off-by: Michal Suchanek Reviewed-by: Fabio Estevam Reviewed-by: Simon Glass --- diff --git a/doc/develop/driver-model/serial-howto.rst b/doc/develop/driver-model/serial-howto.rst index 9da0e57eab..5b1d57d83a 100644 --- a/doc/develop/driver-model/serial-howto.rst +++ b/doc/develop/driver-model/serial-howto.rst @@ -62,7 +62,7 @@ what you need. U-Boot automatically includes these files: see :ref:`dttweaks`. Here are some things you might need to consider: 1. The serial driver itself needs to be present before relocation, so that the - U-Boot banner appears. Make sure it has a u-boot,pre-reloc tag in the device + U-Boot banner appears. Make sure it has a u-boot,dm-pre-reloc tag in the device tree, so that the serial driver is bound when U-Boot starts. For example, on iMX8:: @@ -79,7 +79,7 @@ Here are some things you might need to consider: }; 2. If your serial port requires a particular pinmux configuration, you may need - a pinctrl driver. This needs to have a u-boot,pre-reloc tag also. Take care + a pinctrl driver. This needs to have a u-boot,dm-pre-reloc tag also. Take care that any subnodes have the same tag, if they are needed to make the correct pinctrl available.