From: Tom Rini Date: Sat, 22 May 2021 12:47:10 +0000 (-0400) Subject: arm: Remove nsa310s board X-Git-Url: http://git.dujemihanovic.xyz/html/static/%7B%7B%20.RelPermalink%20%7D%7D?a=commitdiff_plain;h=aa697e6904ba1b3144a46ec642d4695e7c0cdc3e;p=u-boot.git arm: Remove nsa310s board These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove it Cc: Gerald Kerma Cc: Tony Dinh Cc: Luka Perkov Signed-off-by: Tom Rini --- diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index cb4e9f29ef..8e343a5dd4 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -53,9 +53,6 @@ config TARGET_GOFLEXHOME config TARGET_NAS220 bool "BlackArmor NAS220" -config TARGET_NSA310S - bool "Zyxel NSA310S" - config TARGET_SBx81LIFKW bool "Allied Telesis SBx81GS24/SBx81GT40/SBx81XS6/SBx81XS16" @@ -83,7 +80,6 @@ source "board/raidsonic/ib62x0/Kconfig" source "board/Seagate/dockstar/Kconfig" source "board/Seagate/goflexhome/Kconfig" source "board/Seagate/nas220/Kconfig" -source "board/zyxel/nsa310s/Kconfig" source "board/alliedtelesis/SBx81LIFKW/Kconfig" source "board/alliedtelesis/SBx81LIFXCAT/Kconfig" diff --git a/board/zyxel/nsa310s/Kconfig b/board/zyxel/nsa310s/Kconfig deleted file mode 100644 index 801d6966ea..0000000000 --- a/board/zyxel/nsa310s/Kconfig +++ /dev/null @@ -1,18 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2015 -# Gerald Kerma -# Tony Dinh - -if TARGET_NSA310S - -config SYS_BOARD - default "nsa310s" - -config SYS_VENDOR - default "zyxel" - -config SYS_CONFIG_NAME - default "nsa310s" - -endif diff --git a/board/zyxel/nsa310s/MAINTAINERS b/board/zyxel/nsa310s/MAINTAINERS deleted file mode 100644 index d153758c21..0000000000 --- a/board/zyxel/nsa310s/MAINTAINERS +++ /dev/null @@ -1,8 +0,0 @@ -NSA310S BOARD -M: Gerald Kerma -M: Tony Dinh -M: Luka Perkov -S: Maintained -F: board/zyxel/nsa310s/ -F: include/configs/nsa310s.h -F: configs/nsa310s_defconfig diff --git a/board/zyxel/nsa310s/Makefile b/board/zyxel/nsa310s/Makefile deleted file mode 100644 index 2131e28db3..0000000000 --- a/board/zyxel/nsa310s/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2015 -# Gerald Kerma -# Tony Dinh - -obj-y := nsa310s.o diff --git a/board/zyxel/nsa310s/kwbimage.cfg b/board/zyxel/nsa310s/kwbimage.cfg deleted file mode 100644 index 9ebdeab94d..0000000000 --- a/board/zyxel/nsa310s/kwbimage.cfg +++ /dev/null @@ -1,41 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2015 -# Gerald Kerma -# Tony Dinh -# Refer to doc/README.kwbimage for more details about how-to -# configure and create kirkwood boot images. -# - -# Boot Media configurations -BOOT_FROM nand -NAND_ECC_MODE default -NAND_PAGE_SIZE 0x0800 - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xFFD100e0 0x1b1b1b9b - -DATA 0xFFD01400 0x43010c30 -DATA 0xFFD01404 0x39543000 -DATA 0xFFD01408 0x22125451 -DATA 0xFFD0140C 0x00000833 -DATA 0xFFD01410 0x0000000C -DATA 0xFFD01414 0x00000000 -DATA 0xFFD01418 0x00000000 -DATA 0xFFD0141C 0x00000652 -DATA 0xFFD01420 0x00000004 -DATA 0xFFD01424 0x0000F17F -DATA 0xFFD01428 0x00085520 -DATA 0xFFD0147c 0x00008552 -DATA 0xFFD01504 0x0FFFFFF1 -DATA 0xFFD01508 0x10000000 -DATA 0xFFD0150C 0x00000000 -DATA 0xFFD01514 0x00000000 -DATA 0xFFD0151C 0x00000000 -DATA 0xFFD01494 0x00010000 -DATA 0xFFD01498 0x00000000 -DATA 0xFFD0149C 0x0000E403 -DATA 0xFFD01480 0x00000001 -DATA 0xFFD20134 0x66666666 -DATA 0xFFD20138 0x66666666 -DATA 0x0 0x0 diff --git a/board/zyxel/nsa310s/nsa310s.c b/board/zyxel/nsa310s/nsa310s.c deleted file mode 100644 index cd4a7723b1..0000000000 --- a/board/zyxel/nsa310s/nsa310s.c +++ /dev/null @@ -1,135 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2015 - * Gerald Kerma - * Tony Dinh - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "nsa310s.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - /* - * default gpio configuration - * There are maximum 64 gpios controlled through 2 sets of registers - * the below configuration configures mainly initial LED status - */ - mvebu_config_gpio(NSA310S_VAL_LOW, NSA310S_VAL_HIGH, - NSA310S_OE_LOW, NSA310S_OE_HIGH); - - /* (all LEDs & power off active high) */ - /* Multi-Purpose Pins Functionality configuration */ - static const u32 kwmpp_config[] = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, - MPP8_TW_SDA, - MPP9_TW_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_GPO, - MPP13_GPIO, - MPP14_GPIO, - MPP15_GPIO, - MPP16_GPIO, - MPP17_GPIO, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_GPIO, - MPP21_GPIO, - MPP22_GPIO, - MPP23_GPIO, - MPP24_GPIO, - MPP25_GPIO, - MPP26_GPIO, - MPP27_GPIO, - MPP28_GPIO, - MPP29_GPIO, - MPP30_GPIO, - MPP31_GPIO, - MPP32_GPIO, - MPP33_GPIO, - MPP34_GPIO, - MPP35_GPIO, - 0 - }; - kirkwood_mpp_conf(kwmpp_config, NULL); - return 0; -} - -int board_init(void) -{ - /* address of boot parameters */ - gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; - - return 0; -} - -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) -{ - u16 reg; - u16 phyaddr; - char *name = "egiga0"; - - if (miiphy_set_current_dev(name)) - return; - - /* read PHY dev address */ - if (miiphy_read(name, 0xee, 0xee, (u16 *) &phyaddr)) { - printf("could not read PHY dev address\n"); - return; - } - - /* set RGMII delay */ - miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_MAC_CTRL_PG); - miiphy_read(name, phyaddr, MV88E1318_MAC_CTRL_REG, ®); - reg |= (MV88E1318_RGMII_RX_CTRL | MV88E1318_RGMII_TX_CTRL); - miiphy_write(name, phyaddr, MV88E1318_MAC_CTRL_REG, reg); - miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, 0); - - /* reset PHY */ - if (miiphy_reset(name, phyaddr)) - return; - - /* - * ZyXEL NSA310S uses the 88E1310S Alaska (interface identical to 88E1318) - * and has an MCU attached to the LED[2] via tristate interrupt - */ - - /* switch to LED register page */ - miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_LED_PG); - /* read out LED polarity register */ - miiphy_read(name, phyaddr, MV88E1318_LED_POL_REG, ®); - /* clear 4, set 5 - LED2 low, tri-state */ - reg &= ~(MV88E1318_LED2_4); - reg |= (MV88E1318_LED2_5); - /* write back LED polarity register */ - miiphy_write(name, phyaddr, MV88E1318_LED_POL_REG, reg); - /* jump back to page 0, per the PHY chip documenation. */ - miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, 0); - - /* set PHY back to auto-negotiation mode */ - miiphy_write(name, phyaddr, 0x4, 0x1e1); - miiphy_write(name, phyaddr, 0x9, 0x300); - /* downshift */ - miiphy_write(name, phyaddr, 0x10, 0x3860); - miiphy_write(name, phyaddr, 0x0, 0x9140); -} -#endif /* CONFIG_RESET_PHY_R */ diff --git a/board/zyxel/nsa310s/nsa310s.h b/board/zyxel/nsa310s/nsa310s.h deleted file mode 100644 index d8bd9a586f..0000000000 --- a/board/zyxel/nsa310s/nsa310s.h +++ /dev/null @@ -1,46 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2015 - * Gerald Kerma - * Tony Dinh - */ - -#ifndef __NSA310S_H -#define __NSA310S_H - -/* low GPIO's */ -#define HDD1_GREEN_LED (1 << 16) -#define HDD1_RED_LED (1 << 13) -#define USB_GREEN_LED (1 << 15) -#define USB_POWER (1 << 21) -#define SYS_GREEN_LED (1 << 28) -#define SYS_ORANGE_LED (1 << 29) - -#define COPY_GREEN_LED (1 << 22) -#define COPY_RED_LED (1 << 23) - -#define PIN_USB_GREEN_LED 15 -#define PIN_USB_POWER 21 - -#define NSA310S_OE_LOW (~(0)) -#define NSA310S_VAL_LOW (SYS_GREEN_LED | USB_POWER) - -/* high GPIO's */ -#define HDD2_GREEN_LED (1 << 2) -#define HDD2_POWER (1 << 1) - -#define NSA310S_OE_HIGH (~(0)) -#define NSA310S_VAL_HIGH (HDD2_POWER) - -/* PHY related */ -#define MV88E1318_PGADR_REG 22 -#define MV88E1318_MAC_CTRL_PG 2 -#define MV88E1318_MAC_CTRL_REG 21 -#define MV88E1318_RGMII_TX_CTRL (1 << 4) -#define MV88E1318_RGMII_RX_CTRL (1 << 5) -#define MV88E1318_LED_PG 3 -#define MV88E1318_LED_POL_REG 17 -#define MV88E1318_LED2_4 (1 << 4) -#define MV88E1318_LED2_5 (1 << 5) - -#endif /* __NSA310S_H */ diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig deleted file mode 100644 index e4cf1c470e..0000000000 --- a/configs/nsa310s_defconfig +++ /dev/null @@ -1,46 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_KIRKWOOD=y -CONFIG_SYS_TEXT_BASE=0x600000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_TARGET_NSA310S=y -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_OFFSET=0xE0000 -CONFIG_BOOTDELAY=3 -CONFIG_USE_PREBOOT=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="nsa310s => " -CONFIG_CMD_BOOTZ=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_IDE=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xe0000@0x0(uboot),0x20000@0xe0000(uboot_env),0x100000@0x100000(second_stage_uboot),-@0x200000(root)" -CONFIG_CMD_UBI=y -CONFIG_ISO_PARTITION=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NETCONSOLE=y -# CONFIG_MMC is not set -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_SYS_NS16550=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_LZMA=y -CONFIG_BZIP2=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h deleted file mode 100644 index e38c65a485..0000000000 --- a/include/configs/nsa310s.h +++ /dev/null @@ -1,59 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2015 - * Gerald Kerma - * Tony Dinh - * Luka Perkov - */ - -#ifndef _CONFIG_NSA310S_H -#define _CONFIG_NSA310S_H - -/* high level configuration options */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6192 1 /* SOC Name */ -#define CONFIG_KW88F6702 1 /* SOC Name */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ - -#include "mv-common.h" - -/* environment variables configuration */ - -/* default environment variables */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ - "ubi part root; " \ - "ubifsmount ubi:rootfs; " \ - "ubifsload 0x800000 ${kernel}; " \ - "ubifsload 0x700000 ${fdt}; " \ - "ubifsumount; " \ - "fdt addr 0x700000; fdt resize; fdt chosen; " \ - "bootz 0x800000 - 0x700000" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "console=console=ttyS0,115200\0" \ - "mtdids=nand0=orion_nand\0" \ - "mtdparts="CONFIG_MTDPARTS_DEFAULT \ - "kernel=/boot/zImage\0" \ - "fdt=/boot/nsa310s.dtb\0" \ - "bootargs_root=ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw\0" - -/* Ethernet driver configuration */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 1 -#define CONFIG_RESET_PHY_R -#endif /* CONFIG_CMD_NET */ - -/* SATA driver configuration */ -#ifdef CONFIG_IDE -#define __io -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#endif /* CONFIG_IDE */ - -/* RTC driver configuration */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_MV -#endif /* CONFIG_CMD_DATE */ - -#endif /* _CONFIG_NSA310S_H */