From: Jonas Karlman <jonas@kwiboo.se>
Date: Sun, 20 Aug 2023 22:03:18 +0000 (+0000)
Subject: dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation
X-Git-Tag: v2025.01-rc5-pxa1908~847^2~2^2~5
X-Git-Url: http://git.dujemihanovic.xyz/html/static/%7B%7B%20.RelPermalink%20%7D%7D?a=commitdiff_plain;h=9e644284ab812;p=u-boot.git

dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation

Nodes with bootph-pre-sram/ram props are bound in multiple phases:
1. At TPL (bootph-pre-sram) or SPL (bootph-pre-ram) phase
2. At U-Boot proper pre-relocation phase
3. At U-Boot proper normal phase

However the binding and U-Boot Driver Model documentation indicate that
only nodes marked with bootph-all or bootph-some-ram should be bound in
the U-Boot proper pre-relocation phase.

Change ofnode_pre_reloc to report a node with bootph-pre-ram/sram prop
with a pre-reloc status only after U-Boot proper pre-relocation phase.
Also update the ofnode_pre_reloc documentation to closer reflect the
binding and driver model documentation.

This changes behavior of what nodes are bound in the U-Boot proper
pre-relocation phase. Change to bootph-all or add bootph-some-ram prop
to restore prior behavior.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
---

diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c
index ff0a5b5164..2cafa7bca5 100644
--- a/drivers/core/ofnode.c
+++ b/drivers/core/ofnode.c
@@ -1383,7 +1383,7 @@ bool ofnode_pre_reloc(ofnode node)
 	 */
 	if (ofnode_read_bool(node, "bootph-pre-ram") ||
 	    ofnode_read_bool(node, "bootph-pre-sram"))
-		return true;
+		return gd->flags & GD_FLG_RELOC;
 
 	if (IS_ENABLED(CONFIG_OF_TAG_MIGRATE)) {
 		/* detect and handle old tags */
diff --git a/include/dm/ofnode.h b/include/dm/ofnode.h
index 06ea68e81c..06c969c61f 100644
--- a/include/dm/ofnode.h
+++ b/include/dm/ofnode.h
@@ -1211,15 +1211,15 @@ int ofnode_read_simple_size_cells(ofnode node);
  * determine if a node was bound in one of SPL/TPL stages.
  *
  * There are 4 settings currently in use
- * - bootph-some-ram: U-Boot proper pre-relocation only
+ * - bootph-some-ram: U-Boot proper pre-relocation phase
  * - bootph-all: all phases
  * Existing platforms only use it to indicate nodes needed in
  * SPL. Should probably be replaced by bootph-pre-ram for new platforms.
- * - bootph-pre-ram: SPL and U-Boot pre-relocation
- * - bootph-pre-sram: TPL and U-Boot pre-relocation
+ * - bootph-pre-ram: SPL phase
+ * - bootph-pre-sram: TPL phase
  *
  * @node: node to check
- * Return: true if node is needed in SPL/TL, false otherwise
+ * Return: true if node should be or was bound, false otherwise
  */
 bool ofnode_pre_reloc(ofnode node);