From e8eac437189430d8e04a5d254ed92c58bc534a79 Mon Sep 17 00:00:00 2001
From: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Date: Wed, 14 Jan 2009 08:44:26 -0500
Subject: [PATCH] CFI: Add geometry reversal for STMicro M29W320ET
Added flash_fixup_stm to fix geometry reversal on STMicro M29W320ET flash chip.
Modeled after flash_fixup_amd, this patch handles the geometry reversal
or erase sectors that exist for ST Micro (now Numonyx) M29W320ET flash.
Since I cannot test all STM's chips, the detection is implemented as
narrow as possible for now.
Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Signed-off-by: Stefan Roese <sr@denx.de>
---
drivers/mtd/cfi_flash.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index bc5e1514e4..84ff7e8095 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -1808,6 +1808,20 @@ static void flash_fixup_atmel(flash_info_t *info, struct cfi_qry *qry)
cfi_reverse_geometry(qry);
}
+static void flash_fixup_stm(flash_info_t *info, struct cfi_qry *qry)
+{
+ /* check if flash geometry needs reversal */
+ if (qry->num_erase_regions > 1) {
+ /* reverse geometry if top boot part */
+ if (info->cfi_version < 0x3131) {
+ /* CFI < 1.1, guess by device id (only M29W320ET now) */
+ if (info->device_id == 0x2256) {
+ cfi_reverse_geometry(qry);
+ }
+ }
+ }
+}
+
/*
* The following code cannot be run from FLASH!
*
@@ -1881,6 +1895,9 @@ ulong flash_get_size (ulong base, int banknum)
case 0x001f:
flash_fixup_atmel(info, &qry);
break;
+ case 0x0020:
+ flash_fixup_stm(info, &qry);
+ break;
}
debug ("manufacturer is %d\n", info->vendor);
--
2.39.5