From: Sumit Garg Date: Tue, 12 Jul 2022 07:12:08 +0000 (+0530) Subject: board: qualcomm: Add support for dragonboard845c X-Git-Url: http://git.dujemihanovic.xyz/html/static/%7B%7B%20.Permalink%20%7D%7D?a=commitdiff_plain;h=d35b2113745dca34f1557cfad394e6ea79531f2b;p=u-boot.git board: qualcomm: Add support for dragonboard845c Add support for 96Boards Dragonboard 845C aka Robotics RB3 development platform. This board complies with 96Boards Open Platform Specifications. Features: - Qualcomm Snapdragon SDA845 SoC - 4GiB RAM - 64GiB UFS drive U-boot is chain loaded by ABL in 64-bit mode as part of boot.img. For detailed build and boot instructions, refer to doc/board/qualcomm/sdm845.rst, board: dragonboard845c. Signed-off-by: Sumit Garg Reviewed-by: Ramon Fried --- diff --git a/arch/arm/dts/dragonboard845c-uboot.dtsi b/arch/arm/dts/dragonboard845c-uboot.dtsi new file mode 100644 index 0000000000..8b5a7ee573 --- /dev/null +++ b/arch/arm/dts/dragonboard845c-uboot.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * U-Boot addition to handle Qualcomm Robotics RB3 Development Platform + * (dragonboard845c) pins + * + * (C) Copyright 2022 Sumit Garg + */ + +/ +{ + soc { + u-boot,dm-pre-reloc; + + serial@a84000 { + u-boot,dm-pre-reloc; + }; + + clock-controller@100000 { + u-boot,dm-pre-reloc; + }; + + pinctrl_north@3900000 { + u-boot,dm-pre-reloc; + }; + }; +}; + +&pm8998_pon { + key_vol_down { + gpios = <&pm8998_pon 1 0>; + label = "key_vol_down"; + }; + key_power { + gpios = <&pm8998_pon 0 0>; + label = "key_power"; + }; +}; diff --git a/arch/arm/dts/dragonboard845c.dts b/arch/arm/dts/dragonboard845c.dts new file mode 100644 index 0000000000..1722dce33f --- /dev/null +++ b/arch/arm/dts/dragonboard845c.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Qualcomm Robotics RB3 Development (dragonboard845c) board device + * tree source + * + * (C) Copyright 2022 Sumit Garg + */ + +/dts-v1/; + +#include "sdm845.dtsi" + +/ { + model = "Thundercomm Dragonboard 845c"; + compatible = "thundercomm,db845c", "qcom,sdm845"; + #address-cells = <2>; + #size-cells = <2>; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &debug_uart; + }; + + memory { + device_type = "memory"; + reg = <0 0x80000000 0 0xfdfa0000>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc: soc { + serial@a84000 { + status = "okay"; + }; + }; +}; + +#include "dragonboard845c-uboot.dtsi" diff --git a/arch/arm/mach-snapdragon/Kconfig b/arch/arm/mach-snapdragon/Kconfig index 12cf02a56a..cb53dc8901 100644 --- a/arch/arm/mach-snapdragon/Kconfig +++ b/arch/arm/mach-snapdragon/Kconfig @@ -44,6 +44,19 @@ config TARGET_DRAGONBOARD820C - 3GiB RAM - 32GiB UFS drive +config TARGET_DRAGONBOARD845C + bool "96Boards Dragonboard 845C" + help + Support for 96Boards Dragonboard 845C aka Robotics RB3 Development + Platform. This board complies with 96Boards Open Platform + Specifications. Features: + - Qualcomm Snapdragon SDA845 SoC + - 4GiB RAM + - 64GiB UFS drive + select MISC_INIT_R + select SDM845 + select DM_ETH if NET + config TARGET_STARQLTECHN bool "Samsung S9 SM-G9600(starqltechn)" help @@ -60,6 +73,7 @@ endchoice source "board/qualcomm/dragonboard410c/Kconfig" source "board/qualcomm/dragonboard820c/Kconfig" +source "board/qualcomm/dragonboard845c/Kconfig" source "board/samsung/starqltechn/Kconfig" endif diff --git a/board/qualcomm/dragonboard845c/Kconfig b/board/qualcomm/dragonboard845c/Kconfig new file mode 100644 index 0000000000..52fdff288d --- /dev/null +++ b/board/qualcomm/dragonboard845c/Kconfig @@ -0,0 +1,12 @@ +if TARGET_DRAGONBOARD845C + +config SYS_BOARD + default "dragonboard845c" + +config SYS_CONFIG_NAME + default "dragonboard845c" + +config SYS_VENDOR + default "qualcomm" + +endif diff --git a/board/qualcomm/dragonboard845c/MAINTAINERS b/board/qualcomm/dragonboard845c/MAINTAINERS new file mode 100644 index 0000000000..e555953df6 --- /dev/null +++ b/board/qualcomm/dragonboard845c/MAINTAINERS @@ -0,0 +1,6 @@ +Qualcomm Robotics RB3 Development Platform (dragonboard845c) +M: Sumit Garg +S: Maintained +F: board/qualcomm/dragonboard845c/ +F: include/configs/dragonboard845c.h +F: configs/dragonboard845c_defconfig diff --git a/board/qualcomm/dragonboard845c/Makefile b/board/qualcomm/dragonboard845c/Makefile new file mode 100644 index 0000000000..0abefdaf36 --- /dev/null +++ b/board/qualcomm/dragonboard845c/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Sumit Garg +# +# This empty file prevents make error. +# Board logic defined in board/qualcomm/common/sdm845.c, no custom logic for dragonboard845c so far. +# + +obj-y += dragonboard845c.o diff --git a/board/qualcomm/dragonboard845c/db845c.its b/board/qualcomm/dragonboard845c/db845c.its new file mode 100644 index 0000000000..a2621340d1 --- /dev/null +++ b/board/qualcomm/dragonboard845c/db845c.its @@ -0,0 +1,63 @@ +/* + * U-Boot uImage source file with multiple kernels, ramdisks and FDT blobs + */ + +/dts-v1/; + +/ { + description = "Various kernels, ramdisks and FDT blobs"; + #address-cells = <1>; + + images { + kernel-1 { + description = "5.15.0-qcomlt-arm64"; + data = /incbin/("./db845c_imgs/Image.gz--5.15-r0-dragonboard-845c-20211218193034-511.bin"); + type = "kernel"; + arch = "arm64"; + os = "linux"; + compression = "gzip"; + load = <0x80000000>; + entry = <0x80000000>; + hash-1 { + algo = "sha1"; + }; + }; + + ramdisk-1 { + description = "initramfs-test-full-image-dragonboard-845c"; + data = /incbin/("./db845c_imgs/initramfs-test-full-image-dragonboard-845c-20211218193034-511.rootfs.cpio.gz"); + type = "ramdisk"; + arch = "arm64"; + os = "linux"; + compression = "gzip"; + load = <00000000>; + entry = <00000000>; + hash-1 { + algo = "sha1"; + }; + }; + + fdt-1 { + description = "sdm845-db845c-fdt"; + data = /incbin/("./db845c_imgs/sdm845-db845c--5.15-r0-dragonboard-845c-20211218193034.dtb"); + type = "flat_dt"; + arch = "arm64"; + compression = "none"; + hash-1 { + algo = "sha1"; + }; + }; + + }; + + configurations { + default = "config-1"; + + config-1 { + description = "db845c kernel-5.15.0 configuration"; + kernel = "kernel-1"; + ramdisk = "ramdisk-1"; + fdt = "fdt-1"; + }; + }; +}; diff --git a/board/qualcomm/dragonboard845c/dragonboard845c.c b/board/qualcomm/dragonboard845c/dragonboard845c.c new file mode 100644 index 0000000000..c7685de306 --- /dev/null +++ b/board/qualcomm/dragonboard845c/dragonboard845c.c @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * This empty file prevents make linking error. + * No custom logic for dragonboard845c so far. + * + * (C) Copyright 2022 Sumit Garg + */ + +void noop(void) {} diff --git a/configs/dragonboard845c_defconfig b/configs/dragonboard845c_defconfig new file mode 100644 index 0000000000..cf1a1d25cf --- /dev/null +++ b/configs/dragonboard845c_defconfig @@ -0,0 +1,29 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_COUNTER_FREQUENCY=19000000 +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_SNAPDRAGON=y +CONFIG_DEFAULT_DEVICE_TREE="dragonboard845c" +CONFIG_TARGET_DRAGONBOARD845C=y +CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 845C" +CONFIG_SYS_LOAD_ADDR=0x80000000 +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_BOOTDELAY=5 +CONFIG_SAVE_PREV_BL_FDT_ADDR=y +CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_HUSH_PARSER=y +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=512 +CONFIG_CMD_GPIO=y +# CONFIG_NET is not set +CONFIG_CLK=y +CONFIG_MSM_GPIO=y +CONFIG_PM8916_GPIO=y +CONFIG_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_PM8916=y +CONFIG_MSM_GENI_SERIAL=y +CONFIG_SPMI_MSM=y +CONFIG_LMB_MAX_REGIONS=64 diff --git a/doc/board/qualcomm/sdm845.rst b/doc/board/qualcomm/sdm845.rst index b6642c9579..8ef4749287 100644 --- a/doc/board/qualcomm/sdm845.rst +++ b/doc/board/qualcomm/sdm845.rst @@ -35,9 +35,25 @@ Pack android boot image ^^^^^^^^^^^^^^^^^^^^^^^ We'll assemble android boot image with ``u-boot.bin`` instead of linux kernel, and FIT image instead of ``initramfs``. Android bootloader expect gzipped kernel -with appended dtb, so let's mimic linux to satisfy stock bootloader: +with appended dtb, so let's mimic linux to satisfy stock bootloader. -- create dump dtb:: +Boards +------------ +starqlte +^^^^^^^^^^^^ + +The starqltechn is a production board for Samsung S9 (SM-G9600) phone, +based on the Qualcomm SDM845 SoC. + +Steps: + +- Build u-boot:: + + $ export CROSS_COMPILE= + $ make starqltechn_defconfig + $ make + +- Create dump dtb:: workdir=/tmp/prepare_payload mkdir -p "$workdir" @@ -56,10 +72,15 @@ with appended dtb, so let's mimic linux to satisfy stock bootloader: }; EOF -- gzip u-boot ``gzip u-boot.bin`` -- append dtb to gzipped u-boot: ``cat u-boot.bin.gz "$mock_dtb" > u-boot.bin.gz-dtb`` +- gzip u-boot:: + + gzip u-boot.bin -Now we've got everything to build android boot image::: +- Append dtb to gzipped u-boot:: + + cat u-boot.bin.gz "$mock_dtb" > u-boot.bin.gz-dtb + +- Now we've got everything to build android boot image:: mkbootimg --base 0x0 --kernel_offset 0x00008000 \ --ramdisk_offset 0x02000000 --tags_offset 0x01e00000 \ @@ -68,16 +89,69 @@ Now we've got everything to build android boot image::: --kernel u-boot.bin.gz-dtb \ -o boot.img -Flash image with your phone's flashing method. +- Flash image with your phone's flashing method. -Boards ------------- -starqlte -^^^^^^^^^^^^ +More information can be found on the `Samsung S9 page`_. -The starqltechn is a production board for Samsung S9 (SM-G9600) phone, -based on the Qualcomm SDM845 SoC. +dragonboard845c +^^^^^^^^^^^^^^^ -More information can be found on the `Samsung S9 page`_. +The dragonboard845c is a Qualcomm Robotics RB3 Development Platform, based on +the Qualcomm SDM845 SoC. + +Steps: + +- Build u-boot:: + + $ export CROSS_COMPILE= + $ make dragonboard845c_defconfig + $ make + +- Create dummy dtb:: + + workdir=/tmp/prepare_payload + mkdir -p "$workdir" + mock_dtb="$workdir"/payload_mock.dtb + + dtc -I dts -O dtb -o "$mock_dtb" << EOF + /dts-v1/; + / { + #address-cells = <2>; + #size-cells = <2>; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + chosen { }; + }; + EOF + +- gzip u-boot:: + + gzip u-boot.bin + +- Append dtb to gzipped u-boot:: + + cat u-boot.bin.gz "$mock_dtb" > u-boot.bin.gz-dtb + +- A ``db845c.its`` file can be found in ``board/qualcomm/dragonboard845c/`` + directory. It expects a folder as ``db845c_imgs/`` in the main directory + containing pre-built kernel, dts and ramdisk images. See ``db845c.its`` + for full path to images:: + + mkimage -f db845c.its db845c.itb + +- Now we've got everything to build android boot image:: + + mkbootimg --kernel u-boot.bin.gz-dtb --ramdisk db845c.itb \ + --output boot.img --pagesize 4096 --base 0x80000000 + +- Flash boot.img using db845c fastboot method. + +More information can be found on the `DragonBoard 845c page`_. .. _Samsung S9 page: https://en.wikipedia.org/wiki/Samsung_Galaxy_S9 +.. _DragonBoard 845c page: https://www.96boards.org/product/rb3-platform/ diff --git a/include/configs/dragonboard845c.h b/include/configs/dragonboard845c.h new file mode 100644 index 0000000000..677a485623 --- /dev/null +++ b/include/configs/dragonboard845c.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Configuration file for Dragonboard 845c, based on Qualcomm SDA845 chip + * + * (C) Copyright 2022 Sumit Garg + */ + +#ifndef __CONFIGS_SDM845_H +#define __CONFIGS_SDM845_H + +#include +#include + +#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 230400, 460800, 921600 } + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootm_size=0x5000000\0" \ + "bootm_low=0x80000000\0" \ + "bootcmd=bootm $prevbl_initrd_start_addr\0" + +#endif