Heinrich Schuchardt [Sun, 14 Jan 2024 13:18:20 +0000 (14:18 +0100)]
doc: add sphinx_rtd_theme extension
Newer versions of sphinx_rtd_theme require to add sphinx_rtd_theme to the
list of extensions. Cf.
https://github.com/readthedocs/readthedocs.org/pull/9654
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Oliver Faso [Sun, 14 Jan 2024 13:18:19 +0000 (14:18 +0100)]
docs/sphinx: Explicitly convert Sphinx paths to str
Sphinx 7.2+ is switching to using pathlib.Path
instead of str to represent paths. This fixes the
current deprecation warnings and eventual breakage.
This conversion will be a no-op when using older
Sphinx versions.
Signed-off-by: Oliver Faso <erer1243@gmail.com>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230910040811.53046-1-erer1243@gmail.com
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heinrich Schuchardt [Sun, 14 Jan 2024 13:53:13 +0000 (14:53 +0100)]
doc: create index entries for commands
Add the description of CLI commands to the generated index.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heinrich Schuchardt [Sun, 14 Jan 2024 13:54:03 +0000 (14:54 +0100)]
doc: add generated index to table of contents
Show the index in the navigation sidebar.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Mattijs Korpershoek [Wed, 3 Jan 2024 08:00:04 +0000 (09:00 +0100)]
doc: dfu: fix a handful of typos
Reword some sentences, add missing periods and fix various typos in the
dfu documentation.
This was originally contributed on [1]
[1] https://github.com/Maalobs/u-boot/commit/
9a21ed8ba722d904b68945f40ca6697b4b1cc4d4
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tom Rini [Tue, 16 Jan 2024 14:51:16 +0000 (09:51 -0500)]
Merge tag 'qcom-2024.04-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-snapdragon
Qualcomm architecture changes:
* Move clock and pinctrl drivers out of mach-snapdragon
* Various clock driver improvements
* Convert PMIC power/reset key driver to use the button API
* Preparetory work for migrating to upstream DT
Tom Rini [Tue, 16 Jan 2024 14:49:48 +0000 (09:49 -0500)]
Merge tag 'u-boot-imx-
20240115' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx
Caleb Connolly [Mon, 15 Jan 2024 18:03:17 +0000 (18:03 +0000)]
sandbox_flattree: enable button support
sandbox_flattree enables QCOM_PMIC_GPIO which now depends on BUTTON. As
a result the button tests now get run, but fail because the ADC and GPIO
button drivers aren't enabled.
Enable them to run the tests for sandbox_flattree.
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Mon, 8 Jan 2024 15:30:51 +0000 (15:30 +0000)]
test: spmi: fix tests
With the recent changes to the Qualcomm PMIC GPIO driver the sandbox
tests for it no longer pass, update the DTS and tests to work with the
changes.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 5 Dec 2023 13:46:54 +0000 (13:46 +0000)]
pmic: qcom: dont use dev_read_addr to get USID
Linux DTs stuff a value indicating if the USID is a USID or a GSID in the
reg property, the Linux SPMI driver then reads the two address cells
separately. U-boot's dev_read_addr() doesn't know how to handle this, so
use ofnode_read_u32_index() to get just the USID.
The Qcom pmic driver doesn't have support for GSID handling, so just
ignore the second value for now.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 5 Dec 2023 13:46:53 +0000 (13:46 +0000)]
spmi: msm: fix register range names
The core and chnl register ranges were swapped on SDM845. Fix it, and
fetch the register ranges by name instead of by index.
Drop the cosmetic "version" variable and clean up the debug logging.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 5 Dec 2023 13:46:52 +0000 (13:46 +0000)]
gpio: qcom_pmic: drop gpio-count property
This property is not part of the dt bindings and all boards use the new
gpio-ranges property instead. Drop support for this.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 5 Dec 2023 13:46:51 +0000 (13:46 +0000)]
dts: qcom: adjust pmic gpio to use upstream bindings
Use the upstream gpio-ranges property instead of gpio-count, and drop
the bank-name property for Qualcomm boards.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 5 Dec 2023 13:46:50 +0000 (13:46 +0000)]
gpio: qcom_pmic: support upstream DT
Upstream uses the gpio-ranges property to define the number of GPIOs,
support for parsing this when gpio-count is unspecified
Additionally, drop the bank-name property as it isn't used in upstream,
and we can just hardcode the bank name instead.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 5 Dec 2023 13:46:49 +0000 (13:46 +0000)]
gpio: qcom_pmic: drop pon GPIO driver
Remove the (now unused) GPIO driver for the power and resin buttons on
the PMIC.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 5 Dec 2023 13:46:48 +0000 (13:46 +0000)]
mach-snapdragon: switch to PMIC button driver
The PMIC button driver is a much better representation of the hardware
here, adjust the boards to use upstream DT and the PMIC button driver
instead of exposing the buttons as GPIOs and relying on the GPIO-button
driver.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 5 Dec 2023 13:46:47 +0000 (13:46 +0000)]
button: qcom-pmic: introduce Qualcomm PMIC button driver
Qualcomm PMICs include a "pon" function which handles two buttons, the
power button and "resin" button (usually volume down). Introduce a new
driver following upstream Linux DT to enable these and map them to Enter
and Down respectively to enable use in boot menus.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 5 Dec 2023 13:46:46 +0000 (13:46 +0000)]
gpio: qcom_pmic: fix silent dev_read_addr downcast
priv->pid is uint32_t, but dev_read_addr() returns a uint64_t on arm64,
with the upper bits being used for error codes. Do error checking before
downcasting to u32 to prevent errors being silently ignored.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 14 Nov 2023 12:51:12 +0000 (12:51 +0000)]
serial: msm-geni: handle devm_clk_get() errors
devm_clk_get() returns an ERR_PTR on failure, not null. Fix the check to
avoid the board crashing when the clock isn't available.
Additionally, add the missing error handling for this function.
Fixes: 324df15a292e ("serial: qcom: add support for GENI serial driver")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 14 Nov 2023 12:51:11 +0000 (12:51 +0000)]
serial: msm-geni: don't rely on parent misc device
commit
1b15483deb3f ("misc: add Qualcomm GENI SE QUP device driver")
introduced support for platform-specific oversampling values, necessary
to configure the UART clocks on all platforms at runtime. However it
relies in probing a parent device. Despite the DM_FLAG_PRE_RELOC flag,
this is not done consistently during boot.
Instead, take another approach by relying on ofnode_ helpers to read the
serial engine base address and do the read directly. This fixes early
UART on boards with a non-default oversampling rate.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 14 Nov 2023 12:55:43 +0000 (12:55 +0000)]
msm_gpio: use unsigned int
Replaces the uses of "unsigned" with "unsigned int".
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 14 Nov 2023 12:55:42 +0000 (12:55 +0000)]
pinctrl: qcom: make compatible with linux DTs
The pinctrl and GPIO drivers are currently heavily incompatible with
upstream. Most Qualcomm pinctrl blocks feature "tiles" of pins, each at
it's own address. Introduce support for these by allowing the soc driver
to specify per-pin register offsets similarly to the Linux driver.
Adjust the GPIO driver to handle these too, and finally enable support
for all pins with the same numbering as used in Linux.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 14 Nov 2023 12:55:41 +0000 (12:55 +0000)]
pinctrl: qcom: move ipq4019 driver from mach-ipq40xx
Drop the duplicated pinctrl-snapdragon driver from mach-ipq40xx and add
it to drivers/pinctrl/qcom.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 14 Nov 2023 12:55:40 +0000 (12:55 +0000)]
pinctrl: qcom: move out of mach-snapdragon
Move the Qualcomm pinctrl drivers out of mach-snapdragon and over to the
rest of the pinctrl drivers, adjust the drivers so that support for each
platform can be enabled/disabled individually and introduce platform
specific configuration options.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 7 Nov 2023 12:41:05 +0000 (12:41 +0000)]
clk/qcom: fix rcg divider value
The RCG divider field takes a value of (2*h - 1) where h is the divisor.
This allows fractional dividers to be supported by calculating them at
compile time using a macro.
However, the clk_rcg_set_rate_mnd() function was also performing the
calculation. Clean this all up and consistently use the F() macro to
calculate these at compile time and properly support fractional divisors.
Additionally, improve clk_bcr_update() to timeout with a warning rather
than hanging the board, and make the freq_tbl struct and helpers common
so that they can be reused by future platforms.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 7 Nov 2023 12:41:04 +0000 (12:41 +0000)]
clk/qcom: add mnd_width to clk_rcg_set_rate_mnd()
This property is needed on some platforms to ensure that only the
relevant bits are set in the M/N/D registers.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 7 Nov 2023 12:41:03 +0000 (12:41 +0000)]
clk/qcom: use function pointers for enable and set_rate
Currently, it isn't possible to build clock drivers for more than one
platform due to how the msm_enable() and msm_set_rate() callbacks are
implemented.
Extend qcom_clk_data to include function pointers for these and convert
all platforms to use them.
Previously, clock drivers relied on include/configs/<board.h> to include the
board specific sysmap header, however as most of the header contents are clock
driver related, import the contents directly into each clock driver and
remove the header. The only exception here is the dragonboard820c board file
which includes some pinctrl macros, those are also inlined.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
[caleb: remove additional sysmap-sdm845.h mention]
Caleb Connolly [Tue, 7 Nov 2023 12:41:02 +0000 (12:41 +0000)]
clk/qcom: sdm845: add register map for simple gate clocks
Many gate clocks can be enabled with a single register write, add support
for defining these simple gate clocks and add the ones found on SDM845.
While we're here, inline clk_init_uart() into msm_set_rate().
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Konrad Dybcio [Tue, 7 Nov 2023 12:41:01 +0000 (12:41 +0000)]
clk/qcom: handle resets and clocks in one device
Qualcomm's clock controller blocks actually do much more than it
says on the tin.. They provide clocks, resets and power domains.
Currently, U-Boot requires one to spawn 2 separate devices for
controlling clocks and resets, both spanning the same register space.
Refactor the code to make it work with just a single DT node, making
it compatible with upstream Linux bindings and dropping the dedicated
reset driver in favour of including it in the clock driver.
Heavily inspired by Renesas code for a similar hw block.
[caleb: moved drivers to clk/qcom, added reset driver and adjusted bind
logic. Imported qcom,gcc-ipq4019.h from Linux]
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 7 Nov 2023 12:41:00 +0000 (12:41 +0000)]
clk/qcom: move ipq4019 driver from mach-ipq40xx
This driver is just a stub, but it's necessary to support the upcoming
reset driver changes.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Caleb Connolly [Tue, 7 Nov 2023 12:40:59 +0000 (12:40 +0000)]
clk/qcom: move from mach-snapdragon
Clock drivers don't belong here, move them to the right place and
declutter mach-snapdragon a bit.
To de-couple these drivers from specific "target" platforms, add
additional config options to enable each clock driver gated behind a
common CLK_QCOM option and enable them by default for the respective
targets. This will make future work easier as we move towards a generic
Qualcomm target.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Tom Rini [Mon, 15 Jan 2024 14:29:57 +0000 (09:29 -0500)]
Merge tag 'u-boot-nand-
20240115' of https://source.denx.de/u-boot/custodians/u-boot-nand-flash
Pull request for u-boot-nand-
20240115
The first patch is by Heinrich Schuchardt and fixes an integer overflow
The following two patches are by Dario Binacchi and add arguments check
to the nand_mtd_to_devnum() and nand_register() functions.
The remaining patches are by Roger Quadros and include various fixes for
the OMAP platform.
Anatolij Gustschin [Mon, 15 Jan 2024 13:51:30 +0000 (14:51 +0100)]
arm: xea: Add support for boot image source descriptor in SPL
We load two boot image source descriptor structures from last
two sectors in the SPI NOR flash and determine the boot source
for loading the kernel/DTB images, then adjust the boot order for
loading image from eMMC boot0 or boot1 partition.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Lukasz Majewski [Mon, 15 Jan 2024 13:51:29 +0000 (14:51 +0100)]
arm: config: Enable CRC8 support in SPL on imx287 XEA board
The boot0/1 feature uses simple CRC8 to check (in SPL) if
SPI-NOR content is not corrupted, hence the need to enable
it.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Lukasz Majewski [Mon, 15 Jan 2024 13:51:28 +0000 (14:51 +0100)]
arm: xea: Move XEA's environment variables from xea.h to xea.env
The default set of environment variables from CFG_EXTRA_ENV_SETTINGS
has been moved to a separate file - board/liebherr/xea/xea.env
Adjustments done:
- fitImage support
- SPI-NOR layout re-organization
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Yannic Moog [Mon, 15 Jan 2024 09:31:41 +0000 (10:31 +0100)]
board: phytec: fix link error when disabling PHYTEC_SOM_DETECTION
Commit
aa7858fe5e2e ("board: phytec: som_detection: move definitions to
source file") moved function definitions from header to source file.
Makefile however was not updated to unconditionally (from
[..]_SOM_DETECTION) build the imx8 and phytec som detection units.
Also remove unused includes that cause build failures on arm 32bit
boards. SoM detection shall support 32bit boards as well, but arch
specific code should not be included in the generic module.
Fixes: aa7858fe5e2e ("board: phytec: som_detection: move definitions to source file")
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Roger Quadros [Thu, 11 Jan 2024 13:19:20 +0000 (15:19 +0200)]
arm: mach-k3: am642: Define NAND boot device
AM642 SoC supports booting from GPMC NAND device.
Define boot device for it.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://www.mail-archive.com/u-boot@lists.denx.de/msg499180.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Roger Quadros [Thu, 11 Jan 2024 13:19:19 +0000 (15:19 +0200)]
mtd: rawnand: omap_gpmc: fix OF based partition parsing for NAND
Set NAND chip ofnode and device so OF based partition parsing
can work.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://www.mail-archive.com/u-boot@lists.denx.de/msg499178.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Roger Quadros [Thu, 11 Jan 2024 13:19:18 +0000 (15:19 +0200)]
mtd: rawnand: omap_gpmc: Use DT provided IO address
For DM case we can get the NAND chip's IO address from DT
so we don't need to rely on CFG_SYS_NAND_BASE.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://www.mail-archive.com/u-boot@lists.denx.de/msg499177.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Roger Quadros [Thu, 11 Jan 2024 13:19:17 +0000 (15:19 +0200)]
memory: ti-gpmc: Fix build
sys_proto.h no longer exists for K3 platform so drop it.
Include sizes.h to so SZ_16M is visible.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://www.mail-archive.com/u-boot@lists.denx.de/msg499176.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Roger Quadros [Mon, 11 Dec 2023 11:46:00 +0000 (13:46 +0200)]
mtd: rawnand: omap_elm: Fix elm_init definition
The macro ELM_BASE is defined in mach/hardware.h and is
not visible at the omap_elm.h header file. Avoid using it
in omap_elm.h.
Reported-by: Hong Guan <hguan@ti.com>
Fixes: 7363cf0581a3 ("mtd: rawnand: omap_elm: u-boot driver model support")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/all/20231211114600.4414-3-rogerq@kernel.org
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Roger Quadros [Mon, 11 Dec 2023 11:45:59 +0000 (13:45 +0200)]
mtd: nand: omap_gpmc: Fix NAND in SPL for AM335x
AM335x uses a special driver "am335x_spl_bch.c" as SPL
NAND loader. This driver expects 1 sector at a time ECC
and doesn't work well with multi-sector ECC that was implemented in
commit
04fcd2587321 ("mtd: rawnand: omap_gpmc: Fix BCH6/16 HW based correction")
Additionally, the omap_elm driver does not support multi sector ECC and will
need more work and tests to get multi sector working correctly on all
platforms.
Switch back to 1 sector at a time read/ECC.
Fixes: 04fcd2587321 ("mtd: rawnand: omap_gpmc: Fix BCH6/16 HW based correction")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Enrico Leto <enrico.leto@siemens.com>
Tested-by: Heiko Schocher <hs@denx.de>
Link: https://lore.kernel.org/all/20231211114600.4414-2-rogerq@kernel.org/
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Dario Binacchi [Thu, 2 Nov 2023 11:38:22 +0000 (12:38 +0100)]
mtd: nand: check nand_mtd_to_devnum() argument
If the "mtd" parameter is NULL, the search will definitely yield a
negative result. In that case, it's better to exit immediately.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/all/20231102113829.58852-1-dario.binacchi@amarulasolutions.com
Dario Binacchi [Thu, 2 Nov 2023 11:27:33 +0000 (12:27 +0100)]
mtd: nand: complete nand_register() arguments check
The patch checks that the "mtd" parameter is accessible before
proceeding.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/all/20231102112743.57420-1-dario.binacchi@amarulasolutions.com
Heinrich Schuchardt [Thu, 11 Jan 2024 07:31:55 +0000 (08:31 +0100)]
cmd: mtd: avoid unintentional integer overflow
mtd dump beyond 4 GiB will show incorrect results.
Multiplying two u32 will yield a u32. Add a missing cast.
Fixes: 5db66b3aee6f ("cmd: mtd: add 'mtd' command")
Addresses-Coverity-ID: 477205 ("Unintentional integer overflow")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/all/20240111073155.19545-1-heinrich.schuchardt@canonical.com
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Tom Rini [Sun, 14 Jan 2024 23:07:49 +0000 (18:07 -0500)]
Merge branch 'master-sync-dts-663' of https://source.denx.de/u-boot/custodians/u-boot-sh
Marek Vasut [Sun, 3 Dec 2023 13:15:24 +0000 (14:15 +0100)]
ARM: dts: renesas: Synchronize R-Car R8A779F0 S4 DTs with Linux 6.6.3
Synchronize R-Car R8A779F0 S4 DTs with Linux 6.6.3,
commit
bd3a9e5771a8b332f466d06f7c130a69cab0d526 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sun, 3 Dec 2023 13:15:23 +0000 (14:15 +0100)]
ARM: dts: renesas: Synchronize R-Car R8A77990 E3 DTs with Linux 6.6.3
Synchronize R-Car R8A77990 E3 DTs with Linux 6.6.3,
commit
bd3a9e5771a8b332f466d06f7c130a69cab0d526 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sun, 3 Dec 2023 13:15:22 +0000 (14:15 +0100)]
ARM: dts: renesas: Synchronize R-Car R8A77970 V3M DTs with Linux 6.6.3
Synchronize R-Car R8A77970 V3M DTs with Linux 6.6.3,
commit
bd3a9e5771a8b332f466d06f7c130a69cab0d526 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sun, 3 Dec 2023 13:15:21 +0000 (14:15 +0100)]
ARM: dts: renesas: Synchronize R-Car R8A7792 V2H DTs with Linux 6.6.3
Synchronize R-Car R8A7792 V2H DTs with Linux 6.6.3,
commit
bd3a9e5771a8b332f466d06f7c130a69cab0d526 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sun, 3 Dec 2023 13:15:20 +0000 (14:15 +0100)]
clk: renesas: Synchronize RZ R8A774E1 RZ/G2H clock tables with Linux 6.6.3
Synchronize RZ R8A774E1 RZ/G2H clock tables with Linux 6.6.3,
commit
bd3a9e5771a8b332f466d06f7c130a69cab0d526 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sun, 3 Dec 2023 13:15:19 +0000 (14:15 +0100)]
clk: renesas: Synchronize RZ R8A774C0 RZ/G2E clock tables with Linux 6.6.3
Synchronize RZ R8A774C0 RZ/G2E clock tables with Linux 6.6.3,
commit
bd3a9e5771a8b332f466d06f7c130a69cab0d526 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sun, 3 Dec 2023 13:15:18 +0000 (14:15 +0100)]
clk: renesas: Synchronize RZ R8A774B1 RZ/G2N clock tables with Linux 6.6.3
Synchronize RZ R8A774B1 RZ/G2N clock tables with Linux 6.6.3,
commit
bd3a9e5771a8b332f466d06f7c130a69cab0d526 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sun, 3 Dec 2023 13:15:17 +0000 (14:15 +0100)]
clk: renesas: Synchronize RZ R8A774A1 RZ/G2M clock tables with Linux 6.6.3
Synchronize RZ R8A774A1 RZ/G2M clock tables with Linux 6.6.3,
commit
bd3a9e5771a8b332f466d06f7c130a69cab0d526 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sun, 3 Dec 2023 13:15:16 +0000 (14:15 +0100)]
clk: renesas: Synchronize R-Car R8A77995 D3 clock tables with Linux 6.6.3
Synchronize R-Car R8A77995 D3 clock tables with Linux 6.6.3,
commit
bd3a9e5771a8b332f466d06f7c130a69cab0d526 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sun, 3 Dec 2023 13:15:15 +0000 (14:15 +0100)]
clk: renesas: Synchronize R-Car R8A77990 E3 clock tables with Linux 6.6.3
Synchronize R-Car R8A77990 E3 clock tables with Linux 6.6.3,
commit
bd3a9e5771a8b332f466d06f7c130a69cab0d526 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sun, 3 Dec 2023 13:15:14 +0000 (14:15 +0100)]
clk: renesas: Synchronize R-Car R8A77965 M3-N clock tables with Linux 6.6.3
Synchronize R-Car R8A77965 M3-N clock tables with Linux 6.6.3,
commit
bd3a9e5771a8b332f466d06f7c130a69cab0d526 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sun, 3 Dec 2023 13:15:13 +0000 (14:15 +0100)]
clk: renesas: Synchronize R-Car R8A77960 M3-W and R8A77961 M3-W+ clock tables with Linux 6.6.3
Synchronize R-Car R8A77960 M3-W and R8A77961 M3-W+ clock tables with Linux 6.6.3,
commit
bd3a9e5771a8b332f466d06f7c130a69cab0d526 .
Add ZG clock macro into rcar-gen3-cpg.h to cover the new clock type .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tom Rini [Sun, 14 Jan 2024 14:34:14 +0000 (09:34 -0500)]
Merge tag 'efi-2024-04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2024-04-rc1
Documentation:
* update coreboot graphics documentation
* fix '---' rendering
UEFI:
* add missing pointer check after memory allocation in efidebug
* replace duplicate functions efi_dp_append and efi_dp_concat
* support fmp versioning for multi bank update
* avoid using dm_scan_other() in EFI app
Marek Vasut [Sat, 13 Jan 2024 17:59:13 +0000 (18:59 +0100)]
ARM: imx: Set stdio to serial on Data Modul i.MX8M Mini/Plus eDM SBC
In case CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENV are enabled, the console
stdin, stdout, stderr must be defined in environment. Define the default
settings to fix the following warning on boot:
"
In: No input devices available!
Out: No output devices available!
Err: No error devices available!
"
Sort the default environment as well.
Signed-off-by: Marek Vasut <marex@denx.de>
Marek Vasut [Sat, 13 Jan 2024 17:58:30 +0000 (18:58 +0100)]
ARM: imx: Set stdio to serial on DH i.MX8M Plus DHCOM
In case CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENV are enabled, the console
stdin, stdout, stderr must be defined in environment. Define the default
settings to fix the following warning on boot:
"
In: No input devices available!
Out: No output devices available!
Err: No error devices available!
"
Sort the default environment as well.
Signed-off-by: Marek Vasut <marex@denx.de>
Heinrich Schuchardt [Thu, 11 Jan 2024 08:25:35 +0000 (09:25 +0100)]
cmd: efidebug: check pointer after memory allocation
After calling efi_alloc() we must check that the return value is not NULL.
Fixes: f01c961ee34c ("cmd: efidebug: add uri device path")
Addresses-Coverity-ID: 477185 Dereference null return value
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Masahisa Kojima [Thu, 11 Jan 2024 05:35:40 +0000 (14:35 +0900)]
efi_loader: support fmp versioning for multi bank update
This commit stores the firmware version into the array
of fmp_state structure to support the fmp versioning
for multi bank update. The index of the array is identified
by the bank index.
This modification keeps the backward compatibility with
the existing versioning feature.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Masahisa Kojima [Thu, 11 Jan 2024 05:35:39 +0000 (14:35 +0900)]
fwu: fix fwu_get_image_index interface
The capsule update uses the DFU framework for updating
storage. fwu_get_image_index() currently returns the
image_index calculated by (dfu_alt_num + 1), but this is
different from the image_index in UEFI terminology.
Since capsule update implementation calls dfu_write_by_alt
function, it is better that FWU returns the dfu_alt_num.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Ilias Apalodimas [Mon, 8 Jan 2024 08:55:33 +0000 (10:55 +0200)]
efi_loader: Clean up efi_dp_append and efi_dp_concat
Looking back at the initrd storing functionality, we introduced three
functions, efi_dp_append_or_concatenate(), efi_dp_append/concat(). In
hindsight we could have simplified that by a lot. First of all none of
the functions append anything. They all allocate a new device path and
concatenate the contents of two device paths in one. A boolean parameter
controls the final device path -- if that's true an end node is injected
between the two device paths.
So let's rewrite this and make it a bit easier to read. Get rid of
efi_dp_append(), efi_dp_concat() and rename
efi_dp_append_or_concatenate() to efi_dp_concat(). This is far more
intuitive and the only adjustment that is needed is an extra boolean
argument on all callsites.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Grzegorz Szymaszek [Sat, 6 Jan 2024 10:36:54 +0000 (11:36 +0100)]
doc: fix three-dash references in reStructuredText
The "Sending patches" and "Patman patch manager" documents refer to the
three-dash, "---", that separates patch parts. The symbol is written in
the documentation in the same form as it is in actual patches: as three
U+002D HYPHEN-MINUS characters. When building the documentation, Sphinx
converts this symbol to a U+2014 EM DASH, that is invalid in this case.
Make the three-dash symbol a reStructuredText inline literal to prevent
its conversion; that is, enclose it in a pair of double backquotes (`).
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Bin Meng [Thu, 4 Jan 2024 23:25:42 +0000 (07:25 +0800)]
doc: coreboot: Update stale graphics enabling instructions
With latest coreboot (e.g.: v4.22.01), the instructions to enable
graphics support has changed. Refresh the doc.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Masahisa Kojima [Mon, 25 Dec 2023 04:43:54 +0000 (13:43 +0900)]
efi_loader: remove unused members from struct efi_disk_obj
part and dev_index in struct efi_disk_obj are not used,
let's remove it.
This commit also removes the invalid structure comment
for @dev, it does not exist.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Simon Glass [Tue, 19 Dec 2023 14:27:19 +0000 (07:27 -0700)]
efi: Avoid using dm_scan_other()
This function is defined by bootstd so using it precludes using that
feature. Use the board_early_init_r() feature instead.
Nove the affected code into a new file, so that it is clear that
this relates to board init.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Masahisa Kojima [Mon, 18 Dec 2023 09:57:41 +0000 (18:57 +0900)]
efi_loader: fix iteration of FMP protocols
If one of the FMP protocols fails when calling GetImageInfo(),
populating the ESRT ends up with failure and other FMP protocols
are not added to the ESRT. We should still add all other FMP
protocols to the ESRT.
With this commit, iteration of all FMP protocols continues
even though one of the FMP protocols fails.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Lukasz Majewski [Fri, 12 Jan 2024 16:01:48 +0000 (17:01 +0100)]
defconfig: xea: Change default spi-nor memory bus to 2 (single binary)
After the re-sync with Linux kernel (v6.0) of the XEA DTS
(SHA1:
7d08ddd09b75e7a3c103cc0d0d3ed700287f268e) the alias
for SPI bus, to which SPI-NOR memory is connected, has changed from
'spi3' to 'spi2'.
To be in sync with current u-boot's xea dts, the default bus number
(which allows running 'sf probe' without any extra parameters given)
has been adjusted.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Primoz Fiser [Thu, 11 Jan 2024 12:56:25 +0000 (13:56 +0100)]
imx: imx9: fixup thermal trips from fuses
Read i.MX9 CPU temp grade from fuses and fixup thermal trips in Linux
device-tree accordingly.
Based on commit
0543a1ed2787 ("imx8m: fixup thermal trips")
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Yannic Moog [Wed, 10 Jan 2024 13:35:46 +0000 (14:35 +0100)]
board: phytec: MAINTAINERS: add missing phytec doc files
Add rst documentation files to the respective MAINTAINERS file for
PHYTEC boards.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Yannic Moog [Wed, 10 Jan 2024 13:35:45 +0000 (14:35 +0100)]
doc: board: phytec: Add phyGATE-Tauri board documentation
Add brief documentation on how to build a bootable U-Boot image for the
phyGATE-Tauri-L.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Yannic Moog [Wed, 10 Jan 2024 13:35:44 +0000 (14:35 +0100)]
Add support for phyGATE-Tauri-L-iMX8MM
phyGATE-Tauri-L-iMX8MM is a Gateway based on the phycore-imx8mm SoM.
As a result, all the board code of the phycore-imx8mm is used.
Device tree synced with kernel v6.7.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Fabio Estevam [Mon, 8 Jan 2024 21:11:40 +0000 (18:11 -0300)]
imx8m: Select BINMAN at SoC level
All i.MX8M targets rely on using binman to generate the U-Boot
binary.
Select it at the SoC level instead of per board.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Fabio Estevam [Mon, 8 Jan 2024 21:11:39 +0000 (18:11 -0300)]
imx9: Select BINMAN at SoC level
All i.MX93 targets rely on using binman to generate the U-Boot
binary.
Select it at the SoC level instead of per board.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Fabio Estevam [Mon, 8 Jan 2024 21:11:38 +0000 (18:11 -0300)]
doc: imx93_var_som: Adjust the underline length
Adjust the underline length so that it matches the title length.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tom Rini [Fri, 12 Jan 2024 13:34:50 +0000 (08:34 -0500)]
Merge branch '2024-01-12-assorted-fixes'
- Allow defconfigs to #include files (so we can construct a defconfig
from fragments), update phy-mtk-tphy binding, assorted test fixes,
allow building host tools without cryptographic libraries again,
android_ab bugfix, and make some SPL debugging cases easier.
Andrew Davis [Wed, 1 Nov 2023 17:05:18 +0000 (12:05 -0500)]
Makefile: Run defconfig files through the C preprocessor
This allows us to use some of the normal preprocessor directives inside
defconfig files. Such as #define and #include.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Alexey Romanov [Mon, 25 Dec 2023 10:22:45 +0000 (13:22 +0300)]
android_ab: don't ignore ab_control_store return code
ab_control_store() can return an error if writing to disk fails.
In this case, we have to pass the error code to the caller.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Paul-Erwan Rio [Thu, 21 Dec 2023 07:26:11 +0000 (08:26 +0100)]
tools: fix build without LIBCRYPTO support
Commit
cb9faa6f98ae ("tools: Use a single target-independent config to
enable OpenSSL") introduced a target-independent configuration to build
crypto features in host tools.
But since commit
2c21256b27d7 ("hash: Use Kconfig to enable hashing in
host tools and SPL") the build without OpenSSL is broken, due to FIT
signature/encryption features. Add missing conditional compilation
tokens to fix this.
Signed-off-by: Paul-Erwan Rio <paulerwan.rio@gmail.com>
Tested-by: Alexander Dahl <ada@thorsis.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Alexander Dahl [Thu, 21 Dec 2023 07:26:10 +0000 (08:26 +0100)]
tools: kwbimage: Allow disabling build on non-mvebu platforms
Some users want to build with CONFIG_TOOLS_LIBCRYPTO disabled, which in
general is possible for at least some boards. 32-bit mvebu however
requires kwbimage for building SPL, and kwbimage has a hard dependency
to host OpenSSL.
The new symbol CONFIG_TOOLS_KWBIMAGE allows disabling kwbimage build on
non-mvebu platforms, and thus building without host libcrypto from
OpenSSL.
Based on previous work and discussions, see links below.
Link: https://lore.kernel.org/u-boot/20211021093304.25399-1-pali@kernel.org/
Link: https://lore.kernel.org/u-boot/20220111153120.1276641-1-marex@denx.de/
Link: https://lore.kernel.org/u-boot/20230121154743.667253-2-paulerwan.rio@gmail.com/
Cc: Marek Vasut <marex@denx.de>
Cc: Paul-Erwan Rio <paulerwan.rio@gmail.com>
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Peter Robinson [Tue, 19 Dec 2023 22:01:50 +0000 (22:01 +0000)]
test: fs: fs-test: Move the tests to use sha256sum
Move the use of md5s for recording filesystem file integrity
checks to sha256 hashes as they're preferred due to being
less likely to produce clashing hashes. In the process
generalise some of the wording to use the more generic
hash term.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Tom Rini [Tue, 19 Dec 2023 14:03:30 +0000 (09:03 -0500)]
ti: am335x: Remove unused linker script
The board specific linker script has not been used in a long time here,
remove it.
Signed-off-by: Tom Rini <trini@konsulko.com>
Csókás Bence [Tue, 19 Dec 2023 13:33:18 +0000 (14:33 +0100)]
arm: spl: Use separate fault handlers instead of a single common one
It may be necessary to set breakpoints etc. on a specific fault handler in SPL.
Add a Kconfig option to separate the different handlers into their own individual infinite loops.
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Heinrich Schuchardt [Sat, 16 Dec 2023 15:46:31 +0000 (16:46 +0100)]
test: CONFIG_UT_BOOTSTD must depend on CONFIG_BOOTSTD
Building sandbox_defconfig with
CONFIG_BOOTSTD=n
CONFIG_UT_BOOTSTD=y
leads to an error
/usr/bin/ld: test/cmd_ut.o:(.data.rel.cmd_ut_sub+0xc0):
undefined reference to `do_ut_bootstd'
Add the missing dependency.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Heinrich Schuchardt [Sat, 16 Dec 2023 15:38:36 +0000 (16:38 +0100)]
boot: CONFIG_CEDIT must depend on CONFIG_EXPO
Building sandbox_defconfig with
CONFIG_CMD_CEDIT=y
CONFIG_EXPO=n
fails with
cmd/cedit.c:258:(.text.do_cedit_run+0x4c):
undefined reference to `expo_apply_theme
Fix the dependencies.
Fixes: a0874dc4ac71 ("expo: Add a configuration editor")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Heinrich Schuchardt [Sat, 16 Dec 2023 15:19:54 +0000 (16:19 +0100)]
test: build test/boot for CONFIG_UT_BOOTSTD=n
Building sandbox_defconfig with
CONFIG_UT_BOOTSTD=n
CONFIG_MEASURMENT=y
results in an error:
/usr/bin/ld: test/cmd_ut.o:(.data.rel.cmd_ut_sub+0x408):
undefined reference to `do_ut_measurement'
Fixes: 5999ea20fa42 ("test: Add sandbox TPM boot measurement")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Simon Glass [Fri, 15 Dec 2023 23:54:16 +0000 (16:54 -0700)]
boot: Support decompressing non-kernel OS images
Sometimes the kernel is built as an EFI application rather than a
binary. We still want to support compression for this case.
For arm64 the entry point is set later in the bootm_load_os() function,
since these images are typically relocated due to the 2MB-alignment
requirement of arm64 images. But since the EFI image is not in the same
format, we need to update the entry point earlier.
Set the entry point always, for kernel_noload to resolve this problem.
It should be harmless to do this always.
Signed-off-by: Simon Glass <sjg@chromium.org>
Chunfeng Yun [Wed, 13 Dec 2023 06:41:34 +0000 (14:41 +0800)]
phy: phy-mtk-tphy: add properties for phy tuning
Add properties to improve eye diagram which sometimes need adjust
some parameters of u2phy;
Add a property to tune disconnect threshold;
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Chunfeng Yun [Wed, 13 Dec 2023 06:41:33 +0000 (14:41 +0800)]
dt-bindings: phy-mtk-tphy: add properties for phy tuning
Add properties to improve eye diagram which sometimes need adjust
some parameters of u2phy;
Add a property to tune disconnect threshold;
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Tom Rini [Thu, 11 Jan 2024 16:25:07 +0000 (11:25 -0500)]
Merge patch series "net fixes prior lwip"
Maxim Uvarov <maxim.uvarov@linaro.org> says:
Add small net fixes prior lwip patches.
Maxim Uvarov [Tue, 26 Dec 2023 15:46:19 +0000 (21:46 +0600)]
Makefile: add dtbs to clean
CI test checks that generated dtb has to be cleaned up.
Use the same clean procedure as Linux top level Makefile has.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Maxim Uvarov [Tue, 26 Dec 2023 15:46:18 +0000 (21:46 +0600)]
omap3: use device specific naming for mem_init
Use device specific naming for functions so as to not overlap
with common function names.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Maxim Uvarov [Tue, 26 Dec 2023 15:46:17 +0000 (21:46 +0600)]
bcm_ns3: use device specific naming for variables
Use device specific naming for variables so as to not overlap
with common function names.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Maxim Uvarov [Tue, 26 Dec 2023 15:46:16 +0000 (21:46 +0600)]
mach-socfpga: do not overlap defines with lwip
Fix compilation issue with overlapping lwip and march defines.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Maxim Uvarov [Tue, 26 Dec 2023 15:46:15 +0000 (21:46 +0600)]
driver/net/rtl8139: remove debug print
debug print delays reset of the driver. Finally I see
bunch of "rx error FFFF" errors in the screen. CI can
not handle many prints. While network works fine there
Reproduced with:
make CROSS_COMPILE=sh2-linux- r2dplus_defconfig all
qemu-system-sh4 -M r2d -nographic -serial null \
-serial mon:stdio -net user,tftp=`pwd` \
-net nic,model=rtl8139 -kernel ./u-boot.bin
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Maxim Uvarov [Tue, 26 Dec 2023 15:46:14 +0000 (21:46 +0600)]
sandbox: eth-raw-os: successful return code is 0
all network drivers return 0 on the successful
transmission.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Maxim Uvarov [Tue, 26 Dec 2023 15:46:13 +0000 (21:46 +0600)]
net/smc911x: fix return from smc911x_send
return value of smc911x_send is ignored, but on sucesseful
send we need return 0 and or error -ETIMEOUT, not opposite.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>