From: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: Wed, 6 May 2020 22:11:52 +0000 (+0200)
Subject: phy: atheros: Clarify the intention of ar8021_config
X-Git-Tag: v2025.01-rc5-pxa1908~2423^2~7
X-Git-Url: http://git.dujemihanovic.xyz/html/static/%7B%7B%20%28.OutputFormats.Get?a=commitdiff_plain;h=4d4e4cf7798276bcb047b65cf80fde63fd347903;p=u-boot.git

phy: atheros: Clarify the intention of ar8021_config

Debug register 5 contains TX_CLK DELAY at bit 8 and reserved values at
the other bit positions, just like the other PHYs in the family do.
Therefore, it is not necessary to hardcode the reserved values, but
instead simply follow the read-modify-write procedure from the common
function.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
---

diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c
index 3e59c3f391..3cc162828c 100644
--- a/drivers/net/phy/atheros.c
+++ b/drivers/net/phy/atheros.c
@@ -56,10 +56,10 @@ static void ar803x_enable_tx_delay(struct phy_device *phydev, bool on)
 
 static int ar8021_config(struct phy_device *phydev)
 {
-	phy_write(phydev, MDIO_DEVAD_NONE, 0x00, 0x1200);
-	phy_write(phydev, MDIO_DEVAD_NONE, AR803x_PHY_DEBUG_ADDR_REG,
-		  AR803x_DEBUG_REG_5);
-	phy_write(phydev, MDIO_DEVAD_NONE, AR803x_PHY_DEBUG_DATA_REG, 0x3D47);
+	phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR,
+		  BMCR_ANENABLE | BMCR_ANRESTART);
+
+	ar803x_enable_tx_delay(phydev, true);
 
 	phydev->supported = phydev->drv->features;
 	return 0;