From: Sughosh Ganu Date: Mon, 26 Aug 2024 11:59:34 +0000 (+0530) Subject: spl: sandbox: initialise the ram banksize in spl X-Git-Url: http://git.dujemihanovic.xyz/html/static/%7B%7B%20%24.Site.BaseURL%20%7D%7Dposts/index.xml?a=commitdiff_plain;h=d4ab7cde0cd89bafd0626cabbe9b2ed3d733337a;p=u-boot.git spl: sandbox: initialise the ram banksize in spl Initialise the ram bank information for sandbox in SPL. The ram bank information gets initialised as part of the SPL initialisation sequence in board_init_r(), which is then used for adding available memory to the LMB memory map. Signed-off-by: Sughosh Ganu Reviewed-by: Simon Glass --- diff --git a/arch/sandbox/cpu/spl.c b/arch/sandbox/cpu/spl.c index cc46965b73..1c33a520c6 100644 --- a/arch/sandbox/cpu/spl.c +++ b/arch/sandbox/cpu/spl.c @@ -127,6 +127,15 @@ static int load_from_image(struct spl_image_info *spl_image, } SPL_LOAD_IMAGE_METHOD("sandbox_image", 7, BOOT_DEVICE_BOARD, load_from_image); +int dram_init_banksize(void) +{ + /* These are necessary so TFTP can use LMBs to check its load address */ + gd->bd->bi_dram[0].start = gd->ram_base; + gd->bd->bi_dram[0].size = get_effective_memsize(); + + return 0; +} + void spl_board_init(void) { struct sandbox_state *state = state_get_current(); @@ -134,10 +143,6 @@ void spl_board_init(void) if (!CONFIG_IS_ENABLED(UNIT_TEST)) return; - /* These are necessary so TFTP can use LMBs to check its load address */ - gd->bd->bi_dram[0].start = gd->ram_base; - gd->bd->bi_dram[0].size = get_effective_memsize(); - if (state->run_unittests) { struct unit_test *tests = UNIT_TEST_ALL_START(); const int count = UNIT_TEST_ALL_COUNT();