From: Ronald Wahl Date: Wed, 11 Dec 2024 20:52:00 +0000 (+0100) Subject: mmc: Fix potential timer value truncation X-Git-Url: http://git.dujemihanovic.xyz/html/static/%7B%7B%20%24.Site.BaseURL%20%7D%7Dposts/index.xml?a=commitdiff_plain;h=822afeb7bf84ca1c9289a61ea99604b4deb8e091;p=u-boot.git mmc: Fix potential timer value truncation On 64bit systems the timer value might be truncated to a 32bit value causing malfunctions. For example on ARM the timer might start from 0 again only after a cold reset. The 32bit overflow occurs after a bit more than 49 days (1000 Hz counter) so booting after that time may lead to a surprise because the board might become stuck requiring a cold reset. Signed-off-by: Ronald Wahl Cc: Peng Fan Cc: Jaehoon Chung Reviewed-by: Jaehoon Chung --- diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index efe98354a0..799586891a 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -750,7 +750,7 @@ static int mmc_send_op_cond(struct mmc *mmc) { int err, i; int timeout = 1000; - uint start; + ulong start; /* Some cards seem to need this */ mmc_go_idle(mmc); @@ -844,7 +844,8 @@ int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd) static int __mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value, bool send_status) { - unsigned int status, start; + ulong start; + unsigned int status; struct mmc_cmd cmd; int timeout_ms = DEFAULT_CMD6_TIMEOUT_MS; bool is_part_switch = (set == EXT_CSD_CMD_SET_NORMAL) &&