From: Johan Jonker Date: Sat, 30 Nov 2024 21:18:57 +0000 (+0100) Subject: doc: remove redundant Rockchip bindings X-Git-Url: http://git.dujemihanovic.xyz/html/static/%7B%7B%20%24.Site.BaseURL%20%7D%7Dposts/index.xml?a=commitdiff_plain;h=4888d1bd0ea4e1a9976890ba221e9d14433231eb;p=u-boot.git doc: remove redundant Rockchip bindings Most Rockchip device tree related bindings are converted to YAML and available in the U-boot /dts/upstream/Bindings/ directory. Remove all redundant U-boot entries. Signed-off-by: Johan Jonker --- diff --git a/doc/device-tree-bindings/clock/rockchip,rk3188-cru.txt b/doc/device-tree-bindings/clock/rockchip,rk3188-cru.txt deleted file mode 100644 index 0c2bf5eba4..0000000000 --- a/doc/device-tree-bindings/clock/rockchip,rk3188-cru.txt +++ /dev/null @@ -1,61 +0,0 @@ -* Rockchip RK3188/RK3066 Clock and Reset Unit - -The RK3188/RK3066 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or - "rockchip,rk3066a-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3188-cru.h and -dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. -Similar macros exist for the reset sources in these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "xin27m" - 27mhz crystal input on rk3066 - optional, - - "ext_hsadc" - external HSADC clock - optional, - - "ext_cif0" - external camera clock - optional, - - "ext_rmii" - external RMII clock - optional, - - "ext_jtag" - externalJTAG clock - optional - -Example: Clock controller node: - - cru: cru@20000000 { - compatible = "rockchip,rk3188-cru"; - reg = <0x20000000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10124000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10124000 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/doc/device-tree-bindings/clock/rockchip,rk3288-cru.txt b/doc/device-tree-bindings/clock/rockchip,rk3288-cru.txt deleted file mode 100644 index c9fbb76573..0000000000 --- a/doc/device-tree-bindings/clock/rockchip,rk3288-cru.txt +++ /dev/null @@ -1,61 +0,0 @@ -* Rockchip RK3288 Clock and Reset Unit - -The RK3288 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rk3288-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "ext_i2s" - external I2S clock - optional, - - "ext_hsadc" - external HSADC clock - optional, - - "ext_edp_24m" - external display port clock - optional, - - "ext_vip" - external VIP clock - optional, - - "ext_isp" - external ISP clock - optional, - - "ext_jtag" - external JTAG clock - optional - -Example: Clock controller node: - - cru: cru@20000000 { - compatible = "rockchip,rk3188-cru"; - reg = <0x20000000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10124000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10124000 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/doc/device-tree-bindings/clock/rockchip.txt b/doc/device-tree-bindings/clock/rockchip.txt deleted file mode 100644 index 22f6769e5d..0000000000 --- a/doc/device-tree-bindings/clock/rockchip.txt +++ /dev/null @@ -1,77 +0,0 @@ -Device Tree Clock bindings for arch-rockchip - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -== Gate clocks == - -These bindings are deprecated! -Please use the soc specific CRU bindings instead. - -The gate registers form a continuos block which makes the dt node -structure a matter of taste, as either all gates can be put into -one gate clock spanning all registers or they can be divided into -the 10 individual gates containing 16 clocks each. -The code supports both approaches. - -Required properties: -- compatible : "rockchip,rk2928-gate-clk" -- reg : shall be the control register address(es) for the clock. -- #clock-cells : from common clock binding; shall be set to 1 -- clock-output-names : the corresponding gate names that the clock controls -- clocks : should contain the parent clock for each individual gate, - therefore the number of clocks elements should match the number of - clock-output-names - -Example using multiple gate clocks: - - clk_gates0: gate-clk@200000d0 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000d0 0x4>; - clocks = <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>; - - clock-output-names = - "gate_core_periph", "gate_cpu_gpll", - "gate_ddrphy", "gate_aclk_cpu", - "gate_hclk_cpu", "gate_pclk_cpu", - "gate_atclk_cpu", "gate_i2s0", - "gate_i2s0_frac", "gate_i2s1", - "gate_i2s1_frac", "gate_i2s2", - "gate_i2s2_frac", "gate_spdif", - "gate_spdif_frac", "gate_testclk"; - - #clock-cells = <1>; - }; - - clk_gates1: gate-clk@200000d4 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000d4 0x4>; - clocks = <&xin24m>, <&xin24m>, - <&xin24m>, <&dummy>, - <&dummy>, <&xin24m>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>; - - clock-output-names = - "gate_timer0", "gate_timer1", - "gate_timer2", "gate_jtag", - "gate_aclk_lcdc1_src", "gate_otgphy0", - "gate_otgphy1", "gate_ddr_gpll", - "gate_uart0", "gate_frac_uart0", - "gate_uart1", "gate_frac_uart1", - "gate_uart2", "gate_frac_uart2", - "gate_uart3", "gate_frac_uart3"; - - #clock-cells = <1>; - }; diff --git a/doc/device-tree-bindings/pinctrl/rockchip,pinctrl.txt b/doc/device-tree-bindings/pinctrl/rockchip,pinctrl.txt deleted file mode 100644 index 388b213249..0000000000 --- a/doc/device-tree-bindings/pinctrl/rockchip,pinctrl.txt +++ /dev/null @@ -1,157 +0,0 @@ -* Rockchip Pinmux Controller - -The Rockchip Pinmux Controller, enables the IC -to share one PAD to several functional blocks. The sharing is done by -multiplexing the PAD input/output signals. For each PAD there are several -muxing options with option 0 being the use as a GPIO. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The Rockchip pin configuration node is a node of a group of pins which can be -used for a specific device or function. This node represents both mux and -config of the pins in that group. The 'pins' selects the function mode(also -named pin mode) this pin can work on and the 'config' configures various pad -settings such as pull-up, etc. - -The pins are grouped into up to 5 individual pin banks which need to be -defined as gpio sub-nodes of the pinmux controller. - -Required properties for iomux controller: - - compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl" - "rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl" - "rockchip,rk3288-pinctrl" - - rockchip,grf: phandle referencing a syscon providing the - "general register files" - -Optional properties for iomux controller: - - rockchip,pmu: phandle referencing a syscon providing the pmu registers - as some SoCs carry parts of the iomux controller registers there. - Required for at least rk3188 and rk3288. - -Deprecated properties for iomux controller: - - reg: first element is the general register space of the iomux controller - It should be large enough to contain also separate pull registers. - second element is the separate pull register space of the rk3188. - Use rockchip,grf and rockchip,pmu described above instead. - -Required properties for gpio sub nodes: - - compatible: "rockchip,gpio-bank" - - reg: register of the gpio bank (different than the iomux registerset) - - interrupts: base interrupt of the gpio bank in the interrupt controller - - clocks: clock that drives this bank - - gpio-controller: identifies the node as a gpio controller and pin bank. - - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See generic - GPIO binding documentation for description of particular cells. - - interrupt-controller: identifies the controller node as interrupt-parent. - - #interrupt-cells: the value of this property should be 2 and the interrupt - cells should use the standard two-cell scheme described in - bindings/interrupt-controller/interrupts.txt - -Deprecated properties for gpio sub nodes: - - compatible: "rockchip,rk3188-gpio-bank0" - - reg: second element: separate pull register for rk3188 bank0, use - rockchip,pmu described above instead - -Required properties for pin configuration node: - - rockchip,pins: 3 integers array, represents a group of pins mux and config - setting. The format is rockchip,pins = . - The MUX 0 means gpio and MUX 1 to N mean the specific device function. - The phandle of a node containing the generic pinconfig options - to use, as described in pinctrl-bindings.txt in this directory. - -Examples: - -#include - -... - -pinctrl@20008000 { - compatible = "rockchip,rk3066a-pinctrl"; - rockchip,grf = <&grf>; - - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio0: gpio0@20034000 { - compatible = "rockchip,gpio-bank"; - reg = <0x20034000 0x100>; - interrupts = ; - clocks = <&clk_gates8 9>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - ... - - pcfg_pull_default: pcfg_pull_default { - bias-pull-pin-default - }; - - uart2 { - uart2_xfer: uart2-xfer { - rockchip,pins = , - ; - }; - }; -}; - -uart2: serial@20064000 { - compatible = "snps,dw-apb-uart"; - reg = <0x20064000 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&mux_uart2>; - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&uart2_xfer>; -}; - -Example for rk3188: - - pinctrl@20008000 { - compatible = "rockchip,rk3188-pinctrl"; - rockchip,grf = <&grf>; - rockchip,pmu = <&pmu>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio0: gpio0@0x2000a000 { - compatible = "rockchip,rk3188-gpio-bank0"; - reg = <0x2000a000 0x100>; - interrupts = ; - clocks = <&clk_gates8 9>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio1: gpio1@0x2003c000 { - compatible = "rockchip,gpio-bank"; - reg = <0x2003c000 0x100>; - interrupts = ; - clocks = <&clk_gates8 10>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - ... - - }; diff --git a/doc/device-tree-bindings/thermal/rockchip-thermal.txt b/doc/device-tree-bindings/thermal/rockchip-thermal.txt deleted file mode 100644 index ef802de495..0000000000 --- a/doc/device-tree-bindings/thermal/rockchip-thermal.txt +++ /dev/null @@ -1,68 +0,0 @@ -* Temperature Sensor ADC (TSADC) on rockchip SoCs - -Required properties: -- compatible : "rockchip,rk3288-tsadc" -- reg : physical base address of the controller and length of memory mapped - region. -- interrupts : The interrupt number to the cpu. The interrupt specifier format - depends on the interrupt controller. -- clocks : Must contain an entry for each entry in clock-names. -- clock-names : Shall be "tsadc" for the converter-clock, and "apb_pclk" for - the peripheral clock. -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the name "tsadc-apb". -- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. -- rockchip,hw-tshut-temp : The hardware-controlled shutdown temperature value. -- rockchip,hw-tshut-mode : The hardware-controlled shutdown mode 0:CRU 1:GPIO. -- rockchip,hw-tshut-polarity : The hardware-controlled active polarity 0:LOW - 1:HIGH. - -Exiample: -tsadc: tsadc@ff280000 { - compatible = "rockchip,rk3288-tsadc"; - reg = <0xff280000 0x100>; - interrupts = ; - clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; - clock-names = "tsadc", "apb_pclk"; - resets = <&cru SRST_TSADC>; - reset-names = "tsadc-apb"; - pinctrl-names = "default"; - pinctrl-0 = <&otp_out>; - #thermal-sensor-cells = <1>; - rockchip,hw-tshut-temp = <95000>; - rockchip,hw-tshut-mode = <0>; - rockchip,hw-tshut-polarity = <0>; -}; - -Example: referring to thermal sensors: -thermal-zones { - cpu_thermal: cpu_thermal { - polling-delay-passive = <1000>; /* milliseconds */ - polling-delay = <5000>; /* milliseconds */ - - /* sensor ID */ - thermal-sensors = <&tsadc 1>; - - trips { - cpu_alert0: cpu_alert { - temperature = <70000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - cpu_crit: cpu_crit { - temperature = <90000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert0>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; -}; diff --git a/doc/device-tree-bindings/usb/dwc2.txt b/doc/device-tree-bindings/usb/dwc2.txt index 61493f7cb0..7a533f6593 100644 --- a/doc/device-tree-bindings/usb/dwc2.txt +++ b/doc/device-tree-bindings/usb/dwc2.txt @@ -5,10 +5,6 @@ Required properties: - compatible : One of: - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC. - hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC. - - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc; - - "rockchip,px30-usb", "rockchip,rk3066-usb", "snps,dwc2": for px30 Soc; - - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc; - - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc; - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs; - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs; - "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs; diff --git a/doc/device-tree-bindings/video/rockchip-lvds.txt b/doc/device-tree-bindings/video/rockchip-lvds.txt deleted file mode 100644 index 7432e22166..0000000000 --- a/doc/device-tree-bindings/video/rockchip-lvds.txt +++ /dev/null @@ -1,77 +0,0 @@ -Rockchip LVDS interface ------------------- - -Required properties: -- compatible: "rockchip,rk3288-lvds"; - -- reg: physical base address of the controller and length - of memory mapped region. -- clocks: must include clock specifiers corresponding to entries in the - clock-names property. -- clock-names: must contain "pclk_lvds" - -- rockchip,grf: phandle to the general register files syscon - -- rockchip,data-mapping: should be or , - This describes how the color bits are laid out in the - serialized LVDS signal. -- rockchip,data-width : should be <18> or <24>; -- rockchip,output: should be , or - , This describes the output face. - -- display-timings : described by - doc/device-tree-bindings/video/display-timing.txt. - -Example: - lvds: lvds@ff96c000 { - compatible = "rockchip,rk3288-lvds"; - reg = <0xff96c000 0x4000>; - clocks = <&cru PCLK_LVDS_PHY>; - clock-names = "pclk_lvds"; - pinctrl-names = "default"; - pinctrl-0 = <&lcdc0_ctl>; - rockchip,grf = <&grf>; - status = "disabled"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - lvds_in: port@0 { - reg = <0>; - - #address-cells = <1>; - #size-cells = <0>; - - lvds_in_vopb: endpoint@0 { - reg = <0>; - remote-endpoint = <&vopb_out_lvds>; - }; - lvds_in_vopl: endpoint@1 { - reg = <1>; - remote-endpoint = <&vopl_out_lvds>; - }; - }; - }; - }; - - &lvds { - rockchip,data-mapping = ; - rockchip,data-width = <24>; - rockchip,output = ; - rockchip,panel = <&panel>; - status = "okay"; - - display-timings { - timing@0 { - clock-frequency = <40000000>; - hactive = <1920>; - vactive = <1080>; - hsync-len = <44>; - hfront-porch = <88>; - hback-porch = <148>; - vfront-porch = <4>; - vback-porch = <36>; - vsync-len = <5>; - }; - }; - };