From: Heinrich Schuchardt Date: Tue, 19 Dec 2023 15:04:01 +0000 (+0100) Subject: acpi: carve out qfw_acpi.c X-Git-Url: http://git.dujemihanovic.xyz/html/static/%7B%7B%20%24.Site.BaseURL%20%7D%7Dposts/index.xml?a=commitdiff_plain;h=27a66fc3f3102bf88df5d7569e3aae88355c6e47;p=u-boot.git acpi: carve out qfw_acpi.c Move the code related to copying tables from QEMU to a separate code module. Signed-off-by: Heinrich Schuchardt Reviewed-by: Tom Rini Reviewed-by: Simon Glass Reviewed-by: Ilias Apalodimas --- diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index b67b82358a..cda701d38e 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -63,6 +63,7 @@ obj-$(CONFIG_$(SPL_)PWRSEQ) += pwrseq-uclass.o obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o ifdef CONFIG_QFW obj-y += qfw.o +obj-$(CONFIG_QFW_ACPI) += qfw_acpi.o obj-$(CONFIG_QFW_PIO) += qfw_pio.o obj-$(CONFIG_QFW_MMIO) += qfw_mmio.o obj-$(CONFIG_SANDBOX) += qfw_sandbox.o diff --git a/drivers/misc/qfw.c b/drivers/misc/qfw.c index 307334faf4..db98619fdf 100644 --- a/drivers/misc/qfw.c +++ b/drivers/misc/qfw.c @@ -21,246 +21,6 @@ #include #include -#ifdef QFW_ACPI -/* - * This function allocates memory for ACPI tables - * - * @entry : BIOS linker command entry which tells where to allocate memory - * (either high memory or low memory) - * @addr : The address that should be used for low memory allcation. If the - * memory allocation request is 'ZONE_HIGH' then this parameter will - * be ignored. - * @return: 0 on success, or negative value on failure - */ -static int bios_linker_allocate(struct udevice *dev, - struct bios_linker_entry *entry, ulong *addr) -{ - uint32_t size, align; - struct fw_file *file; - unsigned long aligned_addr; - - align = le32_to_cpu(entry->alloc.align); - /* align must be power of 2 */ - if (align & (align - 1)) { - printf("error: wrong alignment %u\n", align); - return -EINVAL; - } - - file = qfw_find_file(dev, entry->alloc.file); - if (!file) { - printf("error: can't find file %s\n", entry->alloc.file); - return -ENOENT; - } - - size = be32_to_cpu(file->cfg.size); - - /* - * ZONE_HIGH means we need to allocate from high memory, since - * malloc space is already at the end of RAM, so we directly use it. - * If allocation zone is ZONE_FSEG, then we use the 'addr' passed - * in which is low memory - */ - if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) { - aligned_addr = (unsigned long)memalign(align, size); - if (!aligned_addr) { - printf("error: allocating resource\n"); - return -ENOMEM; - } - if (aligned_addr < gd->arch.table_start_high) - gd->arch.table_start_high = aligned_addr; - if (aligned_addr + size > gd->arch.table_end_high) - gd->arch.table_end_high = aligned_addr + size; - - } else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) { - aligned_addr = ALIGN(*addr, align); - } else { - printf("error: invalid allocation zone\n"); - return -EINVAL; - } - - debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n", - file->cfg.name, size, entry->alloc.zone, align, aligned_addr); - - qfw_read_entry(dev, be16_to_cpu(file->cfg.select), size, - (void *)aligned_addr); - file->addr = aligned_addr; - - /* adjust address for low memory allocation */ - if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) - *addr = (aligned_addr + size); - - return 0; -} - -/* - * This function patches ACPI tables previously loaded - * by bios_linker_allocate() - * - * @entry : BIOS linker command entry which tells how to patch - * ACPI tables - * @return: 0 on success, or negative value on failure - */ -static int bios_linker_add_pointer(struct udevice *dev, - struct bios_linker_entry *entry) -{ - struct fw_file *dest, *src; - uint32_t offset = le32_to_cpu(entry->pointer.offset); - uint64_t pointer = 0; - - dest = qfw_find_file(dev, entry->pointer.dest_file); - if (!dest || !dest->addr) - return -ENOENT; - src = qfw_find_file(dev, entry->pointer.src_file); - if (!src || !src->addr) - return -ENOENT; - - debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n", - dest->addr, src->addr, offset, entry->pointer.size, pointer); - - memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size); - pointer = le64_to_cpu(pointer); - pointer += (unsigned long)src->addr; - pointer = cpu_to_le64(pointer); - memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size); - - return 0; -} - -/* - * This function updates checksum fields of ACPI tables previously loaded - * by bios_linker_allocate() - * - * @entry : BIOS linker command entry which tells where to update ACPI table - * checksums - * @return: 0 on success, or negative value on failure - */ -static int bios_linker_add_checksum(struct udevice *dev, - struct bios_linker_entry *entry) -{ - struct fw_file *file; - uint8_t *data, cksum = 0; - uint8_t *cksum_start; - - file = qfw_find_file(dev, entry->cksum.file); - if (!file || !file->addr) - return -ENOENT; - - data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset)); - cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start)); - cksum = table_compute_checksum(cksum_start, - le32_to_cpu(entry->cksum.length)); - *data = cksum; - - return 0; -} - -/* This function loads and patches ACPI tables provided by QEMU */ -ulong write_acpi_tables(ulong addr) -{ - int i, ret; - struct fw_file *file; - struct bios_linker_entry *table_loader; - struct bios_linker_entry *entry; - uint32_t size; - struct udevice *dev; - - ret = qfw_get_dev(&dev); - if (ret) { - printf("error: no qfw\n"); - return addr; - } - - /* make sure fw_list is loaded */ - ret = qfw_read_firmware_list(dev); - if (ret) { - printf("error: can't read firmware file list\n"); - return addr; - } - - file = qfw_find_file(dev, "etc/table-loader"); - if (!file) { - printf("error: can't find etc/table-loader\n"); - return addr; - } - - size = be32_to_cpu(file->cfg.size); - if ((size % sizeof(*entry)) != 0) { - printf("error: table-loader maybe corrupted\n"); - return addr; - } - - table_loader = malloc(size); - if (!table_loader) { - printf("error: no memory for table-loader\n"); - return addr; - } - - /* QFW always puts tables at high addresses */ - gd->arch.table_start_high = (ulong)table_loader; - gd->arch.table_end_high = (ulong)table_loader; - - qfw_read_entry(dev, be16_to_cpu(file->cfg.select), size, table_loader); - - for (i = 0; i < (size / sizeof(*entry)); i++) { - entry = table_loader + i; - switch (le32_to_cpu(entry->command)) { - case BIOS_LINKER_LOADER_COMMAND_ALLOCATE: - ret = bios_linker_allocate(dev, entry, &addr); - if (ret) - goto out; - break; - case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER: - ret = bios_linker_add_pointer(dev, entry); - if (ret) - goto out; - break; - case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM: - ret = bios_linker_add_checksum(dev, entry); - if (ret) - goto out; - break; - default: - break; - } - } - -out: - if (ret) { - struct fw_cfg_file_iter iter; - for (file = qfw_file_iter_init(dev, &iter); - !qfw_file_iter_end(&iter); - file = qfw_file_iter_next(&iter)) { - if (file->addr) { - free((void *)file->addr); - file->addr = 0; - } - } - } - - free(table_loader); - - gd_set_acpi_start(acpi_get_rsdp_addr()); - - return addr; -} - -ulong acpi_get_rsdp_addr(void) -{ - int ret; - struct fw_file *file; - struct udevice *dev; - - ret = qfw_get_dev(&dev); - if (ret) { - printf("error: no qfw\n"); - return 0; - } - - file = qfw_find_file(dev, "etc/acpi/rsdp"); - return file->addr; -} -#endif /* QFW_ACPI */ - static void qfw_read_entry_io(struct qfw_dev *qdev, u16 entry, u32 size, void *address) { diff --git a/drivers/misc/qfw_acpi.c b/drivers/misc/qfw_acpi.c new file mode 100644 index 0000000000..6e14b2a504 --- /dev/null +++ b/drivers/misc/qfw_acpi.c @@ -0,0 +1,256 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2015 Miao Yan + * (C) Copyright 2021 Asherah Connor + */ + +#define LOG_CATEGORY UCLASS_QFW + +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* + * This function allocates memory for ACPI tables + * + * @entry : BIOS linker command entry which tells where to allocate memory + * (either high memory or low memory) + * @addr : The address that should be used for low memory allcation. If the + * memory allocation request is 'ZONE_HIGH' then this parameter will + * be ignored. + * @return: 0 on success, or negative value on failure + */ +static int bios_linker_allocate(struct udevice *dev, + struct bios_linker_entry *entry, ulong *addr) +{ + uint32_t size, align; + struct fw_file *file; + unsigned long aligned_addr; + + align = le32_to_cpu(entry->alloc.align); + /* align must be power of 2 */ + if (align & (align - 1)) { + printf("error: wrong alignment %u\n", align); + return -EINVAL; + } + + file = qfw_find_file(dev, entry->alloc.file); + if (!file) { + printf("error: can't find file %s\n", entry->alloc.file); + return -ENOENT; + } + + size = be32_to_cpu(file->cfg.size); + + /* + * ZONE_HIGH means we need to allocate from high memory, since + * malloc space is already at the end of RAM, so we directly use it. + * If allocation zone is ZONE_FSEG, then we use the 'addr' passed + * in which is low memory + */ + if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) { + aligned_addr = (unsigned long)memalign(align, size); + if (!aligned_addr) { + printf("error: allocating resource\n"); + return -ENOMEM; + } + if (aligned_addr < gd->arch.table_start_high) + gd->arch.table_start_high = aligned_addr; + if (aligned_addr + size > gd->arch.table_end_high) + gd->arch.table_end_high = aligned_addr + size; + + } else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) { + aligned_addr = ALIGN(*addr, align); + } else { + printf("error: invalid allocation zone\n"); + return -EINVAL; + } + + debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n", + file->cfg.name, size, entry->alloc.zone, align, aligned_addr); + + qfw_read_entry(dev, be16_to_cpu(file->cfg.select), size, + (void *)aligned_addr); + file->addr = aligned_addr; + + /* adjust address for low memory allocation */ + if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) + *addr = (aligned_addr + size); + + return 0; +} + +/* + * This function patches ACPI tables previously loaded + * by bios_linker_allocate() + * + * @entry : BIOS linker command entry which tells how to patch + * ACPI tables + * @return: 0 on success, or negative value on failure + */ +static int bios_linker_add_pointer(struct udevice *dev, + struct bios_linker_entry *entry) +{ + struct fw_file *dest, *src; + uint32_t offset = le32_to_cpu(entry->pointer.offset); + uint64_t pointer = 0; + + dest = qfw_find_file(dev, entry->pointer.dest_file); + if (!dest || !dest->addr) + return -ENOENT; + src = qfw_find_file(dev, entry->pointer.src_file); + if (!src || !src->addr) + return -ENOENT; + + debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n", + dest->addr, src->addr, offset, entry->pointer.size, pointer); + + memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size); + pointer = le64_to_cpu(pointer); + pointer += (unsigned long)src->addr; + pointer = cpu_to_le64(pointer); + memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size); + + return 0; +} + +/* + * This function updates checksum fields of ACPI tables previously loaded + * by bios_linker_allocate() + * + * @entry : BIOS linker command entry which tells where to update ACPI table + * checksums + * @return: 0 on success, or negative value on failure + */ +static int bios_linker_add_checksum(struct udevice *dev, + struct bios_linker_entry *entry) +{ + struct fw_file *file; + uint8_t *data, cksum = 0; + uint8_t *cksum_start; + + file = qfw_find_file(dev, entry->cksum.file); + if (!file || !file->addr) + return -ENOENT; + + data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset)); + cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start)); + cksum = table_compute_checksum(cksum_start, + le32_to_cpu(entry->cksum.length)); + *data = cksum; + + return 0; +} + +/* This function loads and patches ACPI tables provided by QEMU */ +ulong write_acpi_tables(ulong addr) +{ + int i, ret; + struct fw_file *file; + struct bios_linker_entry *table_loader; + struct bios_linker_entry *entry; + uint32_t size; + struct udevice *dev; + + ret = qfw_get_dev(&dev); + if (ret) { + printf("error: no qfw\n"); + return addr; + } + + /* make sure fw_list is loaded */ + ret = qfw_read_firmware_list(dev); + if (ret) { + printf("error: can't read firmware file list\n"); + return addr; + } + + file = qfw_find_file(dev, "etc/table-loader"); + if (!file) { + printf("error: can't find etc/table-loader\n"); + return addr; + } + + size = be32_to_cpu(file->cfg.size); + if ((size % sizeof(*entry)) != 0) { + printf("error: table-loader maybe corrupted\n"); + return addr; + } + + table_loader = malloc(size); + if (!table_loader) { + printf("error: no memory for table-loader\n"); + return addr; + } + + /* QFW always puts tables at high addresses */ + gd->arch.table_start_high = (ulong)table_loader; + gd->arch.table_end_high = (ulong)table_loader; + + qfw_read_entry(dev, be16_to_cpu(file->cfg.select), size, table_loader); + + for (i = 0; i < (size / sizeof(*entry)); i++) { + entry = table_loader + i; + switch (le32_to_cpu(entry->command)) { + case BIOS_LINKER_LOADER_COMMAND_ALLOCATE: + ret = bios_linker_allocate(dev, entry, &addr); + if (ret) + goto out; + break; + case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER: + ret = bios_linker_add_pointer(dev, entry); + if (ret) + goto out; + break; + case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM: + ret = bios_linker_add_checksum(dev, entry); + if (ret) + goto out; + break; + default: + break; + } + } + +out: + if (ret) { + struct fw_cfg_file_iter iter; + for (file = qfw_file_iter_init(dev, &iter); + !qfw_file_iter_end(&iter); + file = qfw_file_iter_next(&iter)) { + if (file->addr) { + free((void *)file->addr); + file->addr = 0; + } + } + } + + free(table_loader); + + gd_set_acpi_start(acpi_get_rsdp_addr()); + + return addr; +} + +ulong acpi_get_rsdp_addr(void) +{ + int ret; + struct fw_file *file; + struct udevice *dev; + + ret = qfw_get_dev(&dev); + if (ret) { + printf("error: no qfw\n"); + return 0; + } + + file = qfw_find_file(dev, "etc/acpi/rsdp"); + return file->addr; +}