From e3e01a6f94e133fc50ff382f726d122dc495396d Mon Sep 17 00:00:00 2001 From: Paul Barker Date: Mon, 16 Oct 2023 10:25:42 +0100 Subject: [PATCH] arm: dts: Import RZ/G2L SMARC EVK device tree The Renesas RZ/G2L SMARC Evaluation Board Kit consists of the RZ/G2L System-on-Module (SOM) based on the R9A07G044L2 SoC, and a common SMARC carrier board. This patch is based on the corresponding Linux v6.5 device tree (commit 52e12027d50affbf60c6c9c64db8017391b0c22e). Signed-off-by: Paul Barker Reviewed-by: Biju Das Reviewed-by: Lad Prabhakar Reviewed-by: Marek Vasut --- arch/arm/dts/Makefile | 3 + arch/arm/dts/r9a07g044.dtsi | 1273 +++++++++++++++++++++ arch/arm/dts/r9a07g044l2-smarc.dts | 18 + arch/arm/dts/r9a07g044l2.dtsi | 13 + arch/arm/dts/rz-smarc-common.dtsi | 183 +++ arch/arm/dts/rzg2l-smarc-pinfunction.dtsi | 137 +++ arch/arm/dts/rzg2l-smarc-som.dtsi | 353 ++++++ arch/arm/dts/rzg2l-smarc.dtsi | 144 +++ 8 files changed, 2124 insertions(+) create mode 100644 arch/arm/dts/r9a07g044.dtsi create mode 100644 arch/arm/dts/r9a07g044l2-smarc.dts create mode 100644 arch/arm/dts/r9a07g044l2.dtsi create mode 100644 arch/arm/dts/rz-smarc-common.dtsi create mode 100644 arch/arm/dts/rzg2l-smarc-pinfunction.dtsi create mode 100644 arch/arm/dts/rzg2l-smarc-som.dtsi create mode 100644 arch/arm/dts/rzg2l-smarc.dtsi diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 6e9c5f0799..11270532d4 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1120,6 +1120,9 @@ dtb-$(CONFIG_RCAR_GEN4) += \ r8a779f0-spider-u-boot.dtb \ r8a779g0-white-hawk-u-boot.dtb +dtb-$(CONFIG_TARGET_RZG2L) += \ + r9a07g044l2-smarc.dts + ifdef CONFIG_RCAR_64 DTC_FLAGS += -R 4 -p 0x1000 endif diff --git a/arch/arm/dts/r9a07g044.dtsi b/arch/arm/dts/r9a07g044.dtsi new file mode 100644 index 0000000000..232910e074 --- /dev/null +++ b/arch/arm/dts/r9a07g044.dtsi @@ -0,0 +1,1273 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +#include +#include + +/ { + compatible = "renesas,r9a07g044"; + #address-cells = <2>; + #size-cells = <2>; + + audio_clk1: audio1-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by boards that provide it */ + clock-frequency = <0>; + }; + + audio_clk2: audio2-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by boards that provide it */ + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ + extal_clk: extal-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + cluster0_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a55"; + reg = <0>; + device_type = "cpu"; + #cooling-cells = <2>; + next-level-cache = <&L3_CA55>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R9A07G044_CLK_I>; + operating-points-v2 = <&cluster0_opp>; + }; + + cpu1: cpu@100 { + compatible = "arm,cortex-a55"; + reg = <0x100>; + device_type = "cpu"; + next-level-cache = <&L3_CA55>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R9A07G044_CLK_I>; + operating-points-v2 = <&cluster0_opp>; + }; + + L3_CA55: cache-controller-0 { + compatible = "cache"; + cache-unified; + cache-size = <0x40000>; + cache-level = <3>; + }; + }; + + gpu_opp_table: opp-table-1 { + compatible = "operating-points-v2"; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1100000>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <1100000>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <1100000>; + }; + + opp-125000000 { + opp-hz = /bits/ 64 <125000000>; + opp-microvolt = <1100000>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <1100000>; + }; + + opp-62500000 { + opp-hz = /bits/ 64 <62500000>; + opp-microvolt = <1100000>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + opp-microvolt = <1100000>; + }; + }; + + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + soc: soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mtu3: timer@10001200 { + compatible = "renesas,r9a07g044-mtu3", + "renesas,rz-mtu3"; + reg = <0 0x10001200 0 0xb00>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", + "tgiv0", "tgie0", "tgif0", + "tgia1", "tgib1", "tgiv1", "tgiu1", + "tgia2", "tgib2", "tgiv2", "tgiu2", + "tgia3", "tgib3", "tgic3", "tgid3", + "tgiv3", + "tgia4", "tgib4", "tgic4", "tgid4", + "tgiv4", + "tgiu5", "tgiv5", "tgiw5", + "tgia6", "tgib6", "tgic6", "tgid6", + "tgiv6", + "tgia7", "tgib7", "tgic7", "tgid7", + "tgiv7", + "tgia8", "tgib8", "tgic8", "tgid8", + "tgiv8", "tgiu8"; + clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>; + #pwm-cells = <2>; + status = "disabled"; + }; + + ssi0: ssi@10049c00 { + compatible = "renesas,r9a07g044-ssi", + "renesas,rz-ssi"; + reg = <0 0x10049c00 0 0x400>; + interrupts = , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx"; + clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>, + <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G044_SSI0_RST_M2_REG>; + dmas = <&dmac 0x2655>, <&dmac 0x2656>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi1: ssi@1004a000 { + compatible = "renesas,r9a07g044-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a000 0 0x400>; + interrupts = , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx"; + clocks = <&cpg CPG_MOD R9A07G044_SSI1_PCLK2>, + <&cpg CPG_MOD R9A07G044_SSI1_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G044_SSI1_RST_M2_REG>; + dmas = <&dmac 0x2659>, <&dmac 0x265a>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi2: ssi@1004a400 { + compatible = "renesas,r9a07g044-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a400 0 0x400>; + interrupts = , + ; + interrupt-names = "int_req", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G044_SSI2_PCLK2>, + <&cpg CPG_MOD R9A07G044_SSI2_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G044_SSI2_RST_M2_REG>; + dmas = <&dmac 0x265f>; + dma-names = "rt"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi3: ssi@1004a800 { + compatible = "renesas,r9a07g044-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a800 0 0x400>; + interrupts = , + , + ; + interrupt-names = "int_req", "dma_rx", "dma_tx"; + clocks = <&cpg CPG_MOD R9A07G044_SSI3_PCLK2>, + <&cpg CPG_MOD R9A07G044_SSI3_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G044_SSI3_RST_M2_REG>; + dmas = <&dmac 0x2661>, <&dmac 0x2662>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + spi0: spi@1004ac00 { + compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz"; + reg = <0 0x1004ac00 0 0x400>; + interrupts = , + , + ; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD R9A07G044_RSPI0_CLKB>; + resets = <&cpg R9A07G044_RSPI0_RST>; + dmas = <&dmac 0x2e95>, <&dmac 0x2e96>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@1004b000 { + compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz"; + reg = <0 0x1004b000 0 0x400>; + interrupts = , + , + ; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD R9A07G044_RSPI1_CLKB>; + resets = <&cpg R9A07G044_RSPI1_RST>; + dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@1004b400 { + compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz"; + reg = <0 0x1004b400 0 0x400>; + interrupts = , + , + ; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD R9A07G044_RSPI2_CLKB>; + resets = <&cpg R9A07G044_RSPI2_RST>; + dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + scif0: serial@1004b800 { + compatible = "renesas,scif-r9a07g044"; + reg = <0 0x1004b800 0 0x400>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G044_SCIF0_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_SCIF0_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif1: serial@1004bc00 { + compatible = "renesas,scif-r9a07g044"; + reg = <0 0x1004bc00 0 0x400>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G044_SCIF1_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_SCIF1_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif2: serial@1004c000 { + compatible = "renesas,scif-r9a07g044"; + reg = <0 0x1004c000 0 0x400>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G044_SCIF2_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_SCIF2_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif3: serial@1004c400 { + compatible = "renesas,scif-r9a07g044"; + reg = <0 0x1004c400 0 0x400>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G044_SCIF3_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_SCIF3_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif4: serial@1004c800 { + compatible = "renesas,scif-r9a07g044"; + reg = <0 0x1004c800 0 0x400>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G044_SCIF4_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_SCIF4_RST_SYSTEM_N>; + status = "disabled"; + }; + + sci0: serial@1004d000 { + compatible = "renesas,r9a07g044-sci", "renesas,sci"; + reg = <0 0x1004d000 0 0x400>; + interrupts = , + , + , + ; + interrupt-names = "eri", "rxi", "txi", "tei"; + clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_SCI0_RST>; + status = "disabled"; + }; + + sci1: serial@1004d400 { + compatible = "renesas,r9a07g044-sci", "renesas,sci"; + reg = <0 0x1004d400 0 0x400>; + interrupts = , + , + , + ; + interrupt-names = "eri", "rxi", "txi", "tei"; + clocks = <&cpg CPG_MOD R9A07G044_SCI1_CLKP>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_SCI1_RST>; + status = "disabled"; + }; + + canfd: can@10050000 { + compatible = "renesas,r9a07g044-canfd", "renesas,rzg2l-canfd"; + reg = <0 0x10050000 0 0x8000>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "g_err", "g_recc", + "ch0_err", "ch0_rec", "ch0_trx", + "ch1_err", "ch1_rec", "ch1_trx"; + clocks = <&cpg CPG_MOD R9A07G044_CANFD_PCLK>, + <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>; + assigned-clock-rates = <50000000>; + resets = <&cpg R9A07G044_CANFD_RSTP_N>, + <&cpg R9A07G044_CANFD_RSTC_N>; + reset-names = "rstp_n", "rstc_n"; + power-domains = <&cpg>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + channel1 { + status = "disabled"; + }; + }; + + i2c0: i2c@10058000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; + reg = <0 0x10058000 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G044_I2C0_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G044_I2C0_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c1: i2c@10058400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; + reg = <0 0x10058400 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G044_I2C1_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G044_I2C1_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c2: i2c@10058800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; + reg = <0 0x10058800 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G044_I2C2_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G044_I2C2_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c3: i2c@10058c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g044", "renesas,riic-rz"; + reg = <0 0x10058c00 0 0x400>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G044_I2C3_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G044_I2C3_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + adc: adc@10059000 { + compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc"; + reg = <0 0x10059000 0 0x400>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_ADC_ADCLK>, + <&cpg CPG_MOD R9A07G044_ADC_PCLK>; + clock-names = "adclk", "pclk"; + resets = <&cpg R9A07G044_ADC_PRESETN>, + <&cpg R9A07G044_ADC_ADRST_N>; + reset-names = "presetn", "adrst-n"; + power-domains = <&cpg>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + channel@1 { + reg = <1>; + }; + channel@2 { + reg = <2>; + }; + channel@3 { + reg = <3>; + }; + channel@4 { + reg = <4>; + }; + channel@5 { + reg = <5>; + }; + channel@6 { + reg = <6>; + }; + channel@7 { + reg = <7>; + }; + }; + + tsu: thermal@10059400 { + compatible = "renesas,r9a07g044-tsu", + "renesas,rzg2l-tsu"; + reg = <0 0x10059400 0 0x400>; + clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>; + resets = <&cpg R9A07G044_TSU_PRESETN>; + power-domains = <&cpg>; + #thermal-sensor-cells = <1>; + }; + + sbc: spi@10060000 { + compatible = "renesas,r9a07g044-rpc-if", + "renesas,rzg2l-rpc-if"; + reg = <0 0x10060000 0 0x10000>, + <0 0x20000000 0 0x10000000>, + <0 0x10070000 0 0x10000>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_SPI_CLK2>, + <&cpg CPG_MOD R9A07G044_SPI_CLK>; + resets = <&cpg R9A07G044_SPI_RST>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + cru: video@10830000 { + compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru"; + reg = <0 0x10830000 0 0x400>; + clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>, + <&cpg CPG_MOD R9A07G044_CRU_PCLK>, + <&cpg CPG_MOD R9A07G044_CRU_ACLK>; + clock-names = "video", "apb", "axi"; + interrupts = , + , + ; + interrupt-names = "image_conv", "image_conv_err", "axi_mst_err"; + resets = <&cpg R9A07G044_CRU_PRESETN>, + <&cpg R9A07G044_CRU_ARESETN>; + reset-names = "presetn", "aresetn"; + power-domains = <&cpg>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + cruparallel: endpoint@0 { + reg = <0>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + crucsi2: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi2cru>; + }; + }; + }; + }; + + csi2: csi2@10830400 { + compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2"; + reg = <0 0x10830400 0 0xfc00>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>, + <&cpg CPG_MOD R9A07G044_CRU_VCLK>, + <&cpg CPG_MOD R9A07G044_CRU_PCLK>; + clock-names = "system", "video", "apb"; + resets = <&cpg R9A07G044_CRU_PRESETN>, + <&cpg R9A07G044_CRU_CMN_RSTB>; + reset-names = "presetn", "cmn-rstb"; + power-domains = <&cpg>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + csi2cru: endpoint@0 { + reg = <0>; + remote-endpoint = <&crucsi2>; + }; + }; + }; + }; + + dsi: dsi@10850000 { + compatible = "renesas,r9a07g044-mipi-dsi", + "renesas,rzg2l-mipi-dsi"; + reg = <0 0x10850000 0 0x20000>; + interrupts = , + , + , + , + , + , + ; + interrupt-names = "seq0", "seq1", "vin1", "rcv", + "ferr", "ppi", "debug"; + clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>; + clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk"; + resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>, + <&cpg R9A07G044_MIPI_DSI_ARESET_N>, + <&cpg R9A07G044_MIPI_DSI_PRESET_N>; + reset-names = "rst", "arst", "prst"; + power-domains = <&cpg>; + status = "disabled"; + }; + + vspd: vsp@10870000 { + compatible = "renesas,r9a07g044-vsp2"; + reg = <0 0x10870000 0 0x10000>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>, + <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>, + <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>; + clock-names = "aclk", "pclk", "vclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_LCDC_RESET_N>; + renesas,fcp = <&fcpvd>; + }; + + fcpvd: fcp@10880000 { + compatible = "renesas,r9a07g044-fcpvd", + "renesas,fcpv"; + reg = <0 0x10880000 0 0x10000>; + clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>, + <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>, + <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>; + clock-names = "aclk", "pclk", "vclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_LCDC_RESET_N>; + }; + + cpg: clock-controller@11010000 { + compatible = "renesas,r9a07g044-cpg"; + reg = <0 0x11010000 0 0x10000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + sysc: system-controller@11020000 { + compatible = "renesas,r9a07g044-sysc"; + reg = <0 0x11020000 0 0x10000>; + interrupts = , + , + , + ; + interrupt-names = "lpm_int", "ca55stbydone_int", + "cm33stbyr_int", "ca55_deny"; + status = "disabled"; + }; + + pinctrl: pinctrl@11030000 { + compatible = "renesas,r9a07g044-pinctrl"; + reg = <0 0x11030000 0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + interrupt-parent = <&irqc>; + interrupt-controller; + gpio-ranges = <&pinctrl 0 0 392>; + clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_GPIO_RSTN>, + <&cpg R9A07G044_GPIO_PORT_RESETN>, + <&cpg R9A07G044_GPIO_SPARE_RESETN>; + }; + + irqc: interrupt-controller@110a0000 { + compatible = "renesas,r9a07g044-irqc", + "renesas,rzg2l-irqc"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x110a0000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, + <&cpg CPG_MOD R9A07G044_IA55_PCLK>; + clock-names = "clk", "pclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_IA55_RESETN>; + }; + + dmac: dma-controller@11820000 { + compatible = "renesas,r9a07g044-dmac", + "renesas,rz-dmac"; + reg = <0 0x11820000 0 0x10000>, + <0 0x11830000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>, + <&cpg CPG_MOD R9A07G044_DMAC_PCLK>; + clock-names = "main", "register"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_DMAC_ARESETN>, + <&cpg R9A07G044_DMAC_RST_ASYNC>; + reset-names = "arst", "rst_async"; + #dma-cells = <1>; + dma-channels = <16>; + }; + + gpu: gpu@11840000 { + compatible = "renesas,r9a07g044-mali", + "arm,mali-bifrost"; + reg = <0x0 0x11840000 0x0 0x10000>; + interrupts = , + , + , + ; + interrupt-names = "job", "mmu", "gpu", "event"; + clocks = <&cpg CPG_MOD R9A07G044_GPU_CLK>, + <&cpg CPG_MOD R9A07G044_GPU_AXI_CLK>, + <&cpg CPG_MOD R9A07G044_GPU_ACE_CLK>; + clock-names = "gpu", "bus", "bus_ace"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_GPU_RESETN>, + <&cpg R9A07G044_GPU_AXI_RESETN>, + <&cpg R9A07G044_GPU_ACE_RESETN>; + reset-names = "rst", "axi_rst", "ace_rst"; + operating-points-v2 = <&gpu_opp_table>; + }; + + gic: interrupt-controller@11900000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0x11900000 0 0x40000>, + <0x0 0x11940000 0 0x60000>; + interrupts = ; + }; + + sdhi0: mmc@11c00000 { + compatible = "renesas,sdhi-r9a07g044", + "renesas,rcar-gen3-sdhi"; + reg = <0x0 0x11c00000 0 0x10000>; + interrupts = , + ; + clocks = <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK>, + <&cpg CPG_MOD R9A07G044_SDHI0_CLK_HS>, + <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK2>, + <&cpg CPG_MOD R9A07G044_SDHI0_ACLK>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg R9A07G044_SDHI0_IXRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + sdhi1: mmc@11c10000 { + compatible = "renesas,sdhi-r9a07g044", + "renesas,rcar-gen3-sdhi"; + reg = <0x0 0x11c10000 0 0x10000>; + interrupts = , + ; + clocks = <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK>, + <&cpg CPG_MOD R9A07G044_SDHI1_CLK_HS>, + <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK2>, + <&cpg CPG_MOD R9A07G044_SDHI1_ACLK>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg R9A07G044_SDHI1_IXRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + eth0: ethernet@11c20000 { + compatible = "renesas,r9a07g044-gbeth", + "renesas,rzg2l-gbeth"; + reg = <0 0x11c20000 0 0x10000>; + interrupts = , + , + ; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A07G044_ETH0_CLK_AXI>, + <&cpg CPG_MOD R9A07G044_ETH0_CLK_CHI>, + <&cpg CPG_CORE R9A07G044_CLK_HP>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A07G044_ETH0_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + eth1: ethernet@11c30000 { + compatible = "renesas,r9a07g044-gbeth", + "renesas,rzg2l-gbeth"; + reg = <0 0x11c30000 0 0x10000>; + interrupts = , + , + ; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A07G044_ETH1_CLK_AXI>, + <&cpg CPG_MOD R9A07G044_ETH1_CLK_CHI>, + <&cpg CPG_CORE R9A07G044_CLK_HP>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A07G044_ETH1_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + phyrst: usbphy-ctrl@11c40000 { + compatible = "renesas,r9a07g044-usbphy-ctrl", + "renesas,rzg2l-usbphy-ctrl"; + reg = <0 0x11c40000 0 0x10000>; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>; + resets = <&cpg R9A07G044_USB_PRESETN>; + power-domains = <&cpg>; + #reset-cells = <1>; + status = "disabled"; + }; + + ohci0: usb@11c50000 { + compatible = "generic-ohci"; + reg = <0 0x11c50000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G044_USB_U2H0_HRESETN>; + phys = <&usb2_phy0 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci1: usb@11c70000 { + compatible = "generic-ohci"; + reg = <0 0x11c70000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A07G044_USB_U2H1_HRESETN>; + phys = <&usb2_phy1 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci0: usb@11c50100 { + compatible = "generic-ehci"; + reg = <0 0x11c50100 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G044_USB_U2H0_HRESETN>; + phys = <&usb2_phy0 2>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci1: usb@11c70100 { + compatible = "generic-ehci"; + reg = <0 0x11c70100 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A07G044_USB_U2H1_HRESETN>; + phys = <&usb2_phy1 2>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@11c50200 { + compatible = "renesas,usb2-phy-r9a07g044", + "renesas,rzg2l-usb2-phy"; + reg = <0 0x11c50200 0 0x700>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>; + resets = <&phyrst 0>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@11c70200 { + compatible = "renesas,usb2-phy-r9a07g044", + "renesas,rzg2l-usb2-phy"; + reg = <0 0x11c70200 0 0x700>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>; + resets = <&phyrst 1>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + hsusb: usb@11c60000 { + compatible = "renesas,usbhs-r9a07g044", + "renesas,rza2-usbhs"; + reg = <0 0x11c60000 0 0x10000>; + interrupts = , + , + , + ; + clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>, + <&cpg CPG_MOD R9A07G044_USB_U2P_EXR_CPUCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G044_USB_U2P_EXL_SYSRST>; + renesas,buswait = <7>; + phys = <&usb2_phy0 3>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + wdt0: watchdog@12800800 { + compatible = "renesas,r9a07g044-wdt", + "renesas,rzg2l-wdt"; + reg = <0 0x12800800 0 0x400>; + clocks = <&cpg CPG_MOD R9A07G044_WDT0_PCLK>, + <&cpg CPG_MOD R9A07G044_WDT0_CLK>; + clock-names = "pclk", "oscclk"; + interrupts = , + ; + interrupt-names = "wdt", "perrout"; + resets = <&cpg R9A07G044_WDT0_PRESETN>; + power-domains = <&cpg>; + status = "disabled"; + }; + + wdt1: watchdog@12800c00 { + compatible = "renesas,r9a07g044-wdt", + "renesas,rzg2l-wdt"; + reg = <0 0x12800C00 0 0x400>; + clocks = <&cpg CPG_MOD R9A07G044_WDT1_PCLK>, + <&cpg CPG_MOD R9A07G044_WDT1_CLK>; + clock-names = "pclk", "oscclk"; + interrupts = , + ; + interrupt-names = "wdt", "perrout"; + resets = <&cpg R9A07G044_WDT1_PRESETN>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm0: timer@12801000 { + compatible = "renesas,r9a07g044-ostm", + "renesas,ostm"; + reg = <0x0 0x12801000 0x0 0x400>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_OSTM0_PCLK>; + resets = <&cpg R9A07G044_OSTM0_PRESETZ>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm1: timer@12801400 { + compatible = "renesas,r9a07g044-ostm", + "renesas,ostm"; + reg = <0x0 0x12801400 0x0 0x400>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_OSTM1_PCLK>; + resets = <&cpg R9A07G044_OSTM1_PRESETZ>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm2: timer@12801800 { + compatible = "renesas,r9a07g044-ostm", + "renesas,ostm"; + reg = <0x0 0x12801800 0x0 0x400>; + interrupts = ; + clocks = <&cpg CPG_MOD R9A07G044_OSTM2_PCLK>; + resets = <&cpg R9A07G044_OSTM2_PRESETZ>; + power-domains = <&cpg>; + status = "disabled"; + }; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsu 0>; + sustainable-power = <717>; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 0 2>; + contribution = <1024>; + }; + }; + + trips { + sensor_crit: sensor-crit { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + + target: trip-point { + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm/dts/r9a07g044l2-smarc.dts b/arch/arm/dts/r9a07g044l2-smarc.dts new file mode 100644 index 0000000000..bc2af6c92c --- /dev/null +++ b/arch/arm/dts/r9a07g044l2-smarc.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2L SMARC EVK board + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g044l2.dtsi" +#include "rzg2l-smarc-som.dtsi" +#include "rzg2l-smarc-pinfunction.dtsi" +#include "rz-smarc-common.dtsi" +#include "rzg2l-smarc.dtsi" + +/ { + model = "Renesas SMARC EVK based on r9a07g044l2"; + compatible = "renesas,smarc-evk", "renesas,r9a07g044l2", "renesas,r9a07g044"; +}; diff --git a/arch/arm/dts/r9a07g044l2.dtsi b/arch/arm/dts/r9a07g044l2.dtsi new file mode 100644 index 0000000000..91dc10b2cd --- /dev/null +++ b/arch/arm/dts/r9a07g044l2.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2L R9A07G044L2 SoC specific parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g044.dtsi" + +/ { + compatible = "renesas,r9a07g044l2", "renesas,r9a07g044"; +}; diff --git a/arch/arm/dts/rz-smarc-common.dtsi b/arch/arm/dts/rz-smarc-common.dtsi new file mode 100644 index 0000000000..3962d47b3e --- /dev/null +++ b/arch/arm/dts/rz-smarc-common.dtsi @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/{G2L,G2LC,V2L} SMARC EVK common parts + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include +#include + +/* + * SSI-WM8978 + * + * This command is required when Playback/Capture + * + * amixer cset name='Left Input Mixer L2 Switch' on + * amixer cset name='Right Input Mixer R2 Switch' on + * amixer cset name='Headphone Playback Volume' 100 + * amixer cset name='PCM Volume' 100% + * amixer cset name='Input PGA Volume' 25 + * + */ + +/ { + aliases { + serial0 = &scif0; + i2c0 = &i2c0; + i2c1 = &i2c1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + audio_mclock: audio_mclock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + snd_rzg2l: sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&cpu_dai>; + simple-audio-card,frame-master = <&cpu_dai>; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,widgets = "Microphone", "Microphone Jack"; + simple-audio-card,routing = + "L2", "Mic Bias", + "R2", "Mic Bias", + "Mic Bias", "Microphone Jack"; + + cpu_dai: simple-audio-card,cpu { + }; + + codec_dai: simple-audio-card,codec { + clocks = <&audio_mclock>; + sound-dai = <&wm8978>; + }; + }; + + usb0_vbus_otg: regulator-usb0-vbus-otg { + compatible = "regulator-fixed"; + + regulator-name = "USB0_VBUS_OTG"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vccq_sdhi1: regulator-vccq-sdhi1 { + compatible = "regulator-gpio"; + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + }; +}; + +&audio_clk1{ + clock-frequency = <11289600>; +}; + +&audio_clk2{ + clock-frequency = <12288000>; +}; + +&canfd { + pinctrl-0 = <&can0_pins &can1_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + }; + + channel1 { + status = "okay"; + }; +}; + +&ehci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&ohci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&phyrst { + status = "okay"; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi1>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&spi1 { + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + vbus-supply = <&usb0_vbus_otg>; + status = "okay"; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi b/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi new file mode 100644 index 0000000000..9085d8c76c --- /dev/null +++ b/arch/arm/dts/rzg2l-smarc-pinfunction.dtsi @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/{G2L,V2L} SMARC pincontrol parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +#include +#include + +&pinctrl { + pinctrl-0 = <&sound_clk_pins>; + pinctrl-names = "default"; + + can0_pins: can0 { + pinmux = , /* TX */ + ; /* RX */ + }; + + /* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */ + can0-stb-hog { + gpio-hog; + gpios = ; + output-low; + line-name = "can0_stb"; + }; + + can1_pins: can1 { + pinmux = , /* TX */ + ; /* RX */ + }; + + /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */ + can1-stb-hog { + gpio-hog; + gpios = ; + output-low; + line-name = "can1_stb"; + }; + + i2c0_pins: i2c0 { + pins = "RIIC0_SDA", "RIIC0_SCL"; + input-enable; + }; + + i2c1_pins: i2c1 { + pins = "RIIC1_SDA", "RIIC1_SCL"; + input-enable; + }; + + i2c3_pins: i2c3 { + pinmux = , /* SDA */ + ; /* SCL */ + }; + + scif0_pins: scif0 { + pinmux = , /* TxD */ + ; /* RxD */ + }; + + scif2_pins: scif2 { + pinmux = , /* TxD */ + , /* RxD */ + , /* CTS# */ + ; /* RTS# */ + }; + + sd1-pwr-en-hog { + gpio-hog; + gpios = ; + output-high; + line-name = "sd1_pwr_en"; + }; + + sdhi1_pins: sd1 { + sd1_data { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <3300>; + }; + + sd1_ctrl { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <3300>; + }; + + sd1_mux { + pinmux = ; /* SD1_CD */ + }; + }; + + sdhi1_pins_uhs: sd1_uhs { + sd1_data_uhs { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <1800>; + }; + + sd1_ctrl_uhs { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <1800>; + }; + + sd1_mux_uhs { + pinmux = ; /* SD1_CD */ + }; + }; + + sound_clk_pins: sound_clk { + pins = "AUDIO_CLK1", "AUDIO_CLK2"; + input-enable; + }; + + spi1_pins: spi1 { + pinmux = , /* CK */ + , /* MOSI */ + , /* MISO */ + ; /* SSL */ + }; + + ssi0_pins: ssi0 { + pinmux = , /* BCK */ + , /* RCK */ + , /* TXD */ + ; /* RXD */ + }; + + usb0_pins: usb0 { + pinmux = , /* VBUS */ + , /* OVC */ + ; /* OTG_ID */ + }; + + usb1_pins: usb1 { + pinmux = , /* VBUS */ + ; /* OVC */ + }; +}; + diff --git a/arch/arm/dts/rzg2l-smarc-som.dtsi b/arch/arm/dts/rzg2l-smarc-som.dtsi new file mode 100644 index 0000000000..fbbb4f0344 --- /dev/null +++ b/arch/arm/dts/rzg2l-smarc-som.dtsi @@ -0,0 +1,353 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/{G2L,V2L} SMARC SOM common parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +#include +#include +#include + +/* SW1[2] should be at position 2/OFF to enable 64 GB eMMC */ +#define EMMC 1 + +/* + * To enable uSD card on CN3, + * SW1[2] should be at position 3/ON. + * Disable eMMC by setting "#define EMMC 0" above. + */ +#define SDHI (!EMMC) + +/ { + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1p1v: regulator-vdd-core { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + states = <3300000 1>, <1800000 0>; + regulator-boot-on; + gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>; + regulator-always-on; + }; +}; + +&adc { + pinctrl-0 = <&adc_pins>; + pinctrl-names = "default"; + status = "okay"; + + /delete-node/ channel@6; + /delete-node/ channel@7; +}; + +ð0 { + pinctrl-0 = <ð0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy0: ethernet-phy@7 { + compatible = "ethernet-phy-id0022.1640", + "ethernet-phy-ieee802.3-c22"; + reg = <7>; + interrupt-parent = <&irqc>; + interrupts = ; + rxc-skew-psec = <2400>; + txc-skew-psec = <2400>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +ð1 { + pinctrl-0 = <ð1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy1: ethernet-phy@7 { + compatible = "ethernet-phy-id0022.1640", + "ethernet-phy-ieee802.3-c22"; + reg = <7>; + interrupt-parent = <&irqc>; + interrupts = ; + rxc-skew-psec = <2400>; + txc-skew-psec = <2400>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&extal_clk { + clock-frequency = <24000000>; +}; + +&gpu { + mali-supply = <®_1p1v>; +}; + +&ostm1 { + status = "okay"; +}; + +&ostm2 { + status = "okay"; +}; + +&pinctrl { + adc_pins: adc { + pinmux = ; /* ADC_TRG */ + }; + + eth0_pins: eth0 { + pinmux = , /* ET0_LINKSTA */ + , /* ET0_MDC */ + , /* ET0_MDIO */ + , /* ET0_TXC */ + , /* ET0_TX_CTL */ + , /* ET0_TXD0 */ + , /* ET0_TXD1 */ + , /* ET0_TXD2 */ + , /* ET0_TXD3 */ + , /* ET0_RXC */ + , /* ET0_RX_CTL */ + , /* ET0_RXD0 */ + , /* ET0_RXD1 */ + , /* ET0_RXD2 */ + , /* ET0_RXD3 */ + ; /* IRQ2 */ + }; + + eth1_pins: eth1 { + pinmux = , /* ET1_LINKSTA */ + , /* ET1_MDC */ + , /* ET1_MDIO */ + , /* ET1_TXC */ + , /* ET1_TX_CTL */ + , /* ET1_TXD0 */ + , /* ET1_TXD1 */ + , /* ET1_TXD2 */ + , /* ET1_TXD3 */ + , /* ET1_RXC */ + , /* ET1_RX_CTL */ + , /* ET1_RXD0 */ + , /* ET1_RXD1 */ + , /* ET1_RXD2 */ + , /* ET1_RXD3 */ + ; /* IRQ3 */ + }; + + gpio-sd0-pwr-en-hog { + gpio-hog; + gpios = ; + output-high; + line-name = "gpio_sd0_pwr_en"; + }; + + qspi0_pins: qspi0 { + qspi0-data { + pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3"; + power-source = <1800>; + }; + + qspi0-ctrl { + pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#"; + power-source = <1800>; + }; + }; + + /* + * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2] + * The below switch logic can be used to select the device between + * eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT. + * SW1[2] should be at position 2/OFF to enable 64 GB eMMC + * SW1[2] should be at position 3/ON to enable uSD card CN3 + */ + sd0-dev-sel-hog { + gpio-hog; + gpios = ; + output-high; + line-name = "sd0_dev_sel"; + }; + + sdhi0_emmc_pins: sd0emmc { + sd0_emmc_data { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3", + "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7"; + power-source = <1800>; + }; + + sd0_emmc_ctrl { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <1800>; + }; + + sd0_emmc_rst { + pins = "SD0_RST#"; + power-source = <1800>; + }; + }; + + sdhi0_pins: sd0 { + sd0_data { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; + power-source = <3300>; + }; + + sd0_ctrl { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <3300>; + }; + + sd0_mux { + pinmux = ; /* SD0_CD */ + }; + }; + + sdhi0_pins_uhs: sd0_uhs { + sd0_data_uhs { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; + power-source = <1800>; + }; + + sd0_ctrl_uhs { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <1800>; + }; + + sd0_mux_uhs { + pinmux = ; /* SD0_CD */ + }; + }; +}; + +&sbc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,mt25qu512a", "jedec,spi-nor"; + reg = <0>; + m25p,fast-read; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + reg = <0x00000000 0x2000000>; + read-only; + }; + user@2000000 { + reg = <0x2000000 0x2000000>; + }; + }; + }; +}; + +#if SDHI +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi0>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; +#endif + +#if EMMC +&sdhi0 { + pinctrl-0 = <&sdhi0_emmc_pins>; + pinctrl-1 = <&sdhi0_emmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; + status = "okay"; +}; +#endif + +&wdt0 { + status = "okay"; + timeout-sec = <60>; +}; + +&wdt1 { + status = "okay"; + timeout-sec = <60>; +}; diff --git a/arch/arm/dts/rzg2l-smarc.dtsi b/arch/arm/dts/rzg2l-smarc.dtsi new file mode 100644 index 0000000000..2a158a954b --- /dev/null +++ b/arch/arm/dts/rzg2l-smarc.dtsi @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/{G2L,V2L} SMARC EVK common parts + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +#include +#include + +/* comment the #define statement to disable SCIF2 (SER0) on PMOD1 (CN7) */ +#define PMOD1_SER0 1 + +/ { + aliases { + serial1 = &scif2; + i2c3 = &i2c3; + }; + + osc1: cec-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "d"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7535_out>; + }; + }; + }; +}; + +&cpu_dai { + sound-dai = <&ssi0>; +}; + +&dsi { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&adv7535_in>; + }; + }; + }; +}; + +&i2c1 { + adv7535: hdmi@3d { + compatible = "adi,adv7535"; + reg = <0x3d>; + + interrupt-parent = <&pinctrl>; + interrupts = ; + clocks = <&osc1>; + clock-names = "cec"; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + a2vdd-supply = <®_1p8v>; + v3p3-supply = <®_3p3v>; + v1p2-supply = <®_1p8v>; + + adi,dsi-lanes = <4>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7535_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7535_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + + status = "okay"; + + wm8978: codec@1a { + compatible = "wlf,wm8978"; + #sound-dai-cells = <0>; + reg = <0x1a>; + }; +}; + +/* + * To enable SCIF2 (SER0) on PMOD1 (CN7) + * SW1 should be at position 2->3 so that SER0_CTS# line is activated + * SW2 should be at position 2->3 so that SER0_TX line is activated + * SW3 should be at position 2->3 so that SER0_RX line is activated + * SW4 should be at position 2->3 so that SER0_RTS# line is activated + */ +#if PMOD1_SER0 +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; +#endif + +&ssi0 { + pinctrl-0 = <&ssi0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&vccq_sdhi1 { + gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; +}; -- 2.39.5