From d93d363cb782d8c9febc7b3316618d7b9a31dbe2 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Wed, 18 Aug 2021 23:12:39 -0400 Subject: [PATCH] varisys: Remove dead code The platforms this code was for have been removed, drop this support code as well. Signed-off-by: Tom Rini --- board/varisys/common/Makefile | 21 -- board/varisys/common/eeprom.h | 6 - board/varisys/common/sys_eeprom.c | 500 ------------------------------ 3 files changed, 527 deletions(-) delete mode 100644 board/varisys/common/Makefile delete mode 100644 board/varisys/common/eeprom.h delete mode 100644 board/varisys/common/sys_eeprom.c diff --git a/board/varisys/common/Makefile b/board/varisys/common/Makefile deleted file mode 100644 index b7358c7c64..0000000000 --- a/board/varisys/common/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -MINIMAL= - -ifdef CONFIG_SPL_BUILD -ifdef CONFIG_SPL_INIT_MINIMAL -MINIMAL=y -endif -endif - -ifdef MINIMAL -# necessary to create built-in.o -obj- := __dummy__.o -else -ifndef CONFIG_SPL_BUILD -obj-$(CONFIG_ID_EEPROM) += sys_eeprom.o -endif -endif diff --git a/board/varisys/common/eeprom.h b/board/varisys/common/eeprom.h deleted file mode 100644 index 004816a0fd..0000000000 --- a/board/varisys/common/eeprom.h +++ /dev/null @@ -1,6 +0,0 @@ -/* EEPROM init functions for Cyrus */ - - -void init_eeprom(int bus_num, int addr, int addr_len); -void mac_read_from_fixed_id(void); -int mac_read_from_eeprom_common(void); diff --git a/board/varisys/common/sys_eeprom.c b/board/varisys/common/sys_eeprom.c deleted file mode 100644 index 8f624e5e36..0000000000 --- a/board/varisys/common/sys_eeprom.c +++ /dev/null @@ -1,500 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Based on board/freescale/common/sys_eeprom.c - * Copyright 2006, 2008-2009, 2011 Freescale Semiconductor - * - * This defines the API for storing board information in the - * eeprom. It has been adapted from an earlier version of the - * Freescale API, but has a number of key differences. Because - * the two APIs are independent and may diverge further, the - * Varisys version of the API is implemented separately here. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "eeprom.h" - -#ifdef CONFIG_SYS_I2C_EEPROM_NXID_MAC -#define MAX_NUM_PORTS CONFIG_SYS_I2C_EEPROM_NXID_MAC -#else -#define MAX_NUM_PORTS 8 -#endif -#define NXID_VERSION 0 - -/** - * static eeprom: EEPROM layout for NXID formats - * - * See Freescale application note AN3638 for details. - */ -static struct __attribute__ ((__packed__)) eeprom { - u8 id[4]; /* 0x00 - 0x03 EEPROM Tag 'NXID' */ - u8 sn[12]; /* 0x04 - 0x0F Serial Number */ - u8 errata[5]; /* 0x10 - 0x14 Errata Level */ - u8 date[6]; /* 0x15 - 0x1a Build Date */ - u8 res_0; /* 0x1b Reserved */ - u32 version; /* 0x1c - 0x1f NXID Version */ - u8 tempcal[8]; /* 0x20 - 0x27 Temperature Calibration Factors */ - u8 tempcalsys[2]; /* 0x28 - 0x29 System Temperature Calibration Factors */ - u8 tempcalflags; /* 0x2a Temperature Calibration Flags */ - u8 res_1[21]; /* 0x2b - 0x3f Reserved */ - u8 mac_count; /* 0x40 Number of MAC addresses */ - u8 mac_flag; /* 0x41 MAC table flags */ - u8 mac[MAX_NUM_PORTS][6]; /* 0x42 - x MAC addresses */ - u32 crc; /* x+1 CRC32 checksum */ -} e; - -/* Set to 1 if we've read EEPROM into memory */ -static int has_been_read; - -/* Is this a valid NXID EEPROM? */ -#define is_valid ((e.id[0] == 'N') || (e.id[1] == 'X') || \ - (e.id[2] == 'I') || (e.id[3] == 'D')) - -/** Fixed ID field in EEPROM */ -static unsigned char uid[16]; - -static int eeprom_bus_num = -1; -static int eeprom_addr; -static int eeprom_addr_len; - -/** - * This must be called before any eeprom access. - */ -void init_eeprom(int bus_num, int addr, int addr_len) -{ - eeprom_bus_num = bus_num; - eeprom_addr = addr; - eeprom_addr_len = addr_len; -} - -/** - * show_eeprom - display the contents of the EEPROM - */ -void show_eeprom(void) -{ - int i; - unsigned int crc; - - /* EEPROM tag ID, either CCID or NXID */ - printf("ID: %c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3], - be32_to_cpu(e.version)); - - /* Serial number */ - printf("SN: %s\n", e.sn); - - printf("UID: "); - for (i = 0; i < 16; i++) - printf("%02x", uid[i]); - printf("\n"); - - /* Errata level. */ - printf("Errata: %s\n", e.errata); - - /* Build date, BCD date values, as YYMMDDhhmmss */ - printf("Build date: 20%02x/%02x/%02x %02x:%02x:%02x %s\n", - e.date[0], e.date[1], e.date[2], - e.date[3] & 0x7F, e.date[4], e.date[5], - e.date[3] & 0x80 ? "PM" : ""); - - /* Show MAC addresses */ - for (i = 0; i < min(e.mac_count, (u8)MAX_NUM_PORTS); i++) { - u8 *p = e.mac[i]; - - printf("Eth%u: %02x:%02x:%02x:%02x:%02x:%02x\n", i, - p[0], p[1], p[2], p[3], p[4], p[5]); - } - - crc = crc32(0, (void *)&e, sizeof(e) - 4); - - if (crc == be32_to_cpu(e.crc)) - printf("CRC: %08x\n", be32_to_cpu(e.crc)); - else - printf("CRC: %08x (should be %08x)\n", - be32_to_cpu(e.crc), crc); - -#ifdef DEBUG - printf("EEPROM dump: (0x%x bytes)\n", sizeof(e)); - for (i = 0; i < sizeof(e); i++) { - if ((i % 16) == 0) - printf("%02X: ", i); - printf("%02X ", ((u8 *)&e)[i]); - if (((i % 16) == 15) || (i == sizeof(e) - 1)) - printf("\n"); - } -#endif -} - -/** - * read_eeprom - read the EEPROM into memory - */ -int read_eeprom(void) -{ - int ret; - unsigned int bus; - - if (eeprom_bus_num < 0) { - printf("EEPROM not configured\n"); - return -1; - } - - if (has_been_read) - return 0; - - bus = i2c_get_bus_num(); - i2c_set_bus_num(eeprom_bus_num); - - ret = i2c_read(eeprom_addr, 0, eeprom_addr_len, - (void *)&e, sizeof(e)); - - - /* Fixed address of ID field */ - i2c_read(0x5f, 0x80, 1, uid, 16); - - i2c_set_bus_num(bus); - -#ifdef DEBUG - show_eeprom(); -#endif - - has_been_read = (ret == 0) ? 1 : 0; - - return ret; -} - -/** - * update_crc - update the CRC - * - * This function should be called after each update to the EEPROM structure, - * to make sure the CRC is always correct. - */ -static void update_crc(void) -{ - u32 crc, crc_offset = offsetof(struct eeprom, crc); - - crc = crc32(0, (void *)&e, crc_offset); - e.crc = cpu_to_be32(crc); -} - -/** - * prog_eeprom - write the EEPROM from memory - */ -static int prog_eeprom(void) -{ - int ret = 0; - int i; - void *p; - unsigned int bus; - - if (eeprom_bus_num < 0) { - printf("EEPROM not configured\n"); - return -1; - } - - /* Set the reserved values to 0xFF */ - e.res_0 = 0xFF; - memset(e.res_1, 0xFF, sizeof(e.res_1)); - update_crc(); - - bus = i2c_get_bus_num(); - i2c_set_bus_num(eeprom_bus_num); - - /* - * The AT24C02 datasheet says that data can only be written in page - * mode, which means 8 bytes at a time, and it takes up to 5ms to - * complete a given write. - */ - for (i = 0, p = &e; i < sizeof(e); i += 8, p += 8) { - ret = i2c_write(eeprom_addr, i, eeprom_addr_len, - p, min((int)(sizeof(e) - i), 8)); - if (ret) - break; - udelay(5000); /* 5ms write cycle timing */ - } - - if (!ret) { - /* Verify the write by reading back the EEPROM and comparing */ - struct eeprom e2; - - ret = i2c_read(eeprom_addr, 0, - eeprom_addr_len, (void *)&e2, sizeof(e2)); - if (!ret && memcmp(&e, &e2, sizeof(e))) - ret = -1; - } - - i2c_set_bus_num(bus); - - if (ret) { - printf("Programming failed.\n"); - has_been_read = 0; - return -1; - } - - printf("Programming passed.\n"); - return 0; -} - -/** - * h2i - converts hex character into a number - * - * This function takes a hexadecimal character (e.g. '7' or 'C') and returns - * the integer equivalent. - */ -static inline u8 h2i(char p) -{ - if ((p >= '0') && (p <= '9')) - return p - '0'; - - if ((p >= 'A') && (p <= 'F')) - return (p - 'A') + 10; - - if ((p >= 'a') && (p <= 'f')) - return (p - 'a') + 10; - - return 0; -} - -/** - * set_date - stores the build date into the EEPROM - * - * This function takes a pointer to a string in the format "YYMMDDhhmmss" - * (2-digit year, 2-digit month, etc), converts it to a 6-byte BCD string, - * and stores it in the build date field of the EEPROM local copy. - */ -static void set_date(const char *string) -{ - unsigned int i; - - if (strlen(string) != 12) { - printf("Usage: mac date YYMMDDhhmmss\n"); - return; - } - - for (i = 0; i < 6; i++) - e.date[i] = h2i(string[2 * i]) << 4 | h2i(string[2 * i + 1]); - - update_crc(); -} - -/** - * set_mac_address - stores a MAC address into the EEPROM - * - * This function takes a pointer to MAC address string - * (i.e."XX:XX:XX:XX:XX:XX", where "XX" is a two-digit hex number) and - * stores it in one of the MAC address fields of the EEPROM local copy. - */ -static void set_mac_address(unsigned int index, const char *string) -{ - char *p = (char *)string; - unsigned int i; - - if ((index >= MAX_NUM_PORTS) || !string) { - printf("Usage: mac XX:XX:XX:XX:XX:XX\n"); - return; - } - - for (i = 0; *p && (i < 6); i++) { - e.mac[index][i] = hextoul(p, &p); - if (*p == ':') - p++; - } - - update_crc(); -} - -int do_mac(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) -{ - char cmd; - - if (argc == 1) { - show_eeprom(); - return 0; - } - - cmd = argv[1][0]; - - if (cmd == 'r') { - read_eeprom(); - return 0; - } - - if (cmd == 'i') { - memcpy(e.id, "NXID", sizeof(e.id)); - e.version = NXID_VERSION; - update_crc(); - return 0; - } - - if (!is_valid) { - printf("Please read the EEPROM ('r') and/or set the ID ('i') first.\n"); - return 0; - } - - if (argc == 2) { - switch (cmd) { - case 's': /* save */ - prog_eeprom(); - break; - default: - return cmd_usage(cmdtp); - } - - return 0; - } - - /* We know we have at least one parameter */ - - switch (cmd) { - case 'n': /* serial number */ - memset(e.sn, 0, sizeof(e.sn)); - strncpy((char *)e.sn, argv[2], sizeof(e.sn) - 1); - update_crc(); - break; - case 'e': /* errata */ - memset(e.errata, 0, 5); - strncpy((char *)e.errata, argv[2], 4); - update_crc(); - break; - case 'd': /* date BCD format YYMMDDhhmmss */ - set_date(argv[2]); - break; - case 'p': /* MAC table size */ - e.mac_count = hextoul(argv[2], NULL); - update_crc(); - break; - case '0' ... '9': /* "mac 0" through "mac 22" */ - set_mac_address(dectoul(argv[1], NULL), argv[2]); - break; - case 'h': /* help */ - default: - return cmd_usage(cmdtp); - } - - return 0; -} - -int mac_read_from_generic_eeprom(const char *envvar, int chip, - int address, int mac_bus) -{ - int ret; - unsigned int bus; - unsigned char mac[6]; - char ethaddr[18]; - - bus = i2c_get_bus_num(); - i2c_set_bus_num(mac_bus); - - ret = i2c_read(chip, address, 1, mac, 6); - - i2c_set_bus_num(bus); - - if (!ret) { - sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X", - mac[0], - mac[1], - mac[2], - mac[3], - mac[4], - mac[5]); - - printf("MAC: %s\n", ethaddr); - env_set(envvar, ethaddr); - } - - return ret; -} - -void mac_read_from_fixed_id(void) -{ -#ifdef CONFIG_SYS_I2C_MAC1_CHIP_ADDR - mac_read_from_generic_eeprom("ethaddr", CONFIG_SYS_I2C_MAC1_CHIP_ADDR, - CONFIG_SYS_I2C_MAC1_DATA_ADDR, CONFIG_SYS_I2C_MAC1_BUS); -#endif -#ifdef CONFIG_SYS_I2C_MAC2_CHIP_ADDR - mac_read_from_generic_eeprom("eth1addr", CONFIG_SYS_I2C_MAC2_CHIP_ADDR, - CONFIG_SYS_I2C_MAC2_DATA_ADDR, CONFIG_SYS_I2C_MAC2_BUS); -#endif -} - -/** - * mac_read_from_eeprom - read the MAC addresses from EEPROM - * - * This function reads the MAC addresses from EEPROM and sets the - * appropriate environment variables for each one read. - * - * The environment variables are only set if they haven't been set already. - * This ensures that any user-saved variables are never overwritten. - * - * This function must be called after relocation. - * - * For NXID v1 EEPROMs, we support loading and up-converting the older NXID v0 - * format. In a v0 EEPROM, there are only eight MAC addresses and the CRC is - * located at a different offset. - */ -int mac_read_from_eeprom_common(void) -{ - unsigned int i; - u32 crc, crc_offset = offsetof(struct eeprom, crc); - u32 *crcp; /* Pointer to the CRC in the data read from the EEPROM */ - - puts("EEPROM: "); - - if (read_eeprom()) { - printf("Read failed.\n"); - return 0; - } - - if (!is_valid) { - printf("Invalid ID (%02x %02x %02x %02x)\n", - e.id[0], e.id[1], e.id[2], e.id[3]); - return 0; - } - - crc = crc32(0, (void *)&e, crc_offset); - crcp = (void *)&e + crc_offset; - if (crc != be32_to_cpu(*crcp)) { - printf("CRC mismatch (%08x != %08x)\n", crc, - be32_to_cpu(e.crc)); - return 0; - } - - /* - * MAC address #9 in v1 occupies the same position as the CRC in v0. - * Erase it so that it's not mistaken for a MAC address. We'll - * update the CRC later. - */ - if (e.version == 0) - memset(e.mac[8], 0xff, 6); - - for (i = 0; i < min(e.mac_count, (u8)MAX_NUM_PORTS); i++) { - if (memcmp(&e.mac[i], "\0\0\0\0\0\0", 6) && - memcmp(&e.mac[i], "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) { - char ethaddr[18]; - char enetvar[9]; - - sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X", - e.mac[i][0], - e.mac[i][1], - e.mac[i][2], - e.mac[i][3], - e.mac[i][4], - e.mac[i][5]); - sprintf(enetvar, i ? "eth%daddr" : "ethaddr", i); - /* Only initialize environment variables that are blank - * (i.e. have not yet been set) - */ - if (!env_get(enetvar)) - env_set(enetvar, ethaddr); - } - } - - printf("%c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3], - be32_to_cpu(e.version)); - - return 0; -} -- 2.39.5