From c186596ac45e7b5521e6df5a9471793c763eb20b Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 15 Jun 2023 18:09:03 +0800 Subject: [PATCH] imx: congatec/cgtqmx8: correct SCU API usage The return value is int type, not sc_err_t(u8), correct the usage. Signed-off-by: Peng Fan Tested-by: Oliver Graute Reviewed-by: Oliver Graute --- board/congatec/cgtqmx8/cgtqmx8.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/board/congatec/cgtqmx8/cgtqmx8.c b/board/congatec/cgtqmx8/cgtqmx8.c index bedd1e0330..26189ff66f 100644 --- a/board/congatec/cgtqmx8/cgtqmx8.c +++ b/board/congatec/cgtqmx8/cgtqmx8.c @@ -79,7 +79,7 @@ static void setup_iomux_uart(void) int board_early_init_f(void) { /* sc_ipc_t ipcHndl = 0; */ - sc_err_t scierr = 0; + int scierr; /* When start u-boot in XEN VM, directly return */ /* if (IS_ENABLED(CONFIG_XEN)) */ @@ -89,19 +89,19 @@ int board_early_init_f(void) /* Power up UART0, this is very early while power domain is not working */ scierr = sc_pm_set_resource_power_mode(-1, SC_R_UART_0, SC_PM_PW_MODE_ON); - if (scierr != SC_ERR_NONE) + if (scierr) return 0; /* Set UART0 clock root to 80 MHz */ sc_pm_clock_rate_t rate = 80000000; scierr = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate); - if (scierr != SC_ERR_NONE) + if (scierr) return 0; /* Enable UART0 clock root */ scierr = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false); - if (scierr != SC_ERR_NONE) + if (scierr) return 0; setup_iomux_uart(); -- 2.39.5