From 9ae369a0d696bd8d9c0cebf3b90e64b6b992b282 Mon Sep 17 00:00:00 2001 From: Benjamin Hahn Date: Mon, 4 Mar 2024 12:48:54 +0100 Subject: [PATCH] drivers: imx_tmu: Select polling-rate from cpu-thermal devicetree node The polling rate is already specified in some devicetrees, like imx8mp.dtsi for example, but was not selected so far. For the trippoints, the cpu-thermal node is used. Also get the polling rate from this node. Use the default of 5000ms if the polling rate should not be specified in the devicetree. NOTE: The polling rate from the devicetree will be used after this patch. In imx8*.dtsi devicetrees the polling delay is set to 2000ms for example. Signed-off-by: Benjamin Hahn Reviewed-by: Fabio Estevam --- drivers/thermal/imx_tmu.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/imx_tmu.c b/drivers/thermal/imx_tmu.c index 4721cfbc02..c7fe0f07a6 100644 --- a/drivers/thermal/imx_tmu.c +++ b/drivers/thermal/imx_tmu.c @@ -570,12 +570,14 @@ static int imx_tmu_parse_fdt(struct udevice *dev) { struct imx_tmu_plat *pdata = dev_get_plat(dev), *p_parent_data; struct ofnode_phandle_args args; - ofnode trips_np; + ofnode trips_np, cpu_thermal_np; int ret; dev_dbg(dev, "%s\n", __func__); - pdata->polling_delay = IMX_TMU_POLLING_DELAY_MS; + cpu_thermal_np = ofnode_path("/thermal-zones/cpu-thermal"); + pdata->polling_delay = ofnode_read_u32_default(cpu_thermal_np, "polling-delay", + IMX_TMU_POLLING_DELAY_MS); if (pdata->zone_node) { pdata->regs = (union tmu_regs *)dev_read_addr_ptr(dev); -- 2.39.5