From 6f6fbb334cc72cd5183cfe9a5b9fd31bc5d404d7 Mon Sep 17 00:00:00 2001 From: Sean Anderson Date: Tue, 30 Aug 2022 17:01:07 -0400 Subject: [PATCH] ddr: fsl: Make bank_addr_bits reflect actual bits In both the Freescale DDR controller and the SPD spec, bank address bits are stored as the number of bank address bits minus 2. For example, if a chip had 8 banks (3 total bank address bits), the value of bank_addr_bits would be 1. This is rather surprising for users configuring their memory manually, since they can't set bank_addr_bits to the actual number of bank address bits. Rectify this. There is at least one example of this kind of mistake already, in board/freescale/t102xrdb/ddr.c. The documented MT40A512M8HX has two bank address bits, but bank_addr_bits was set to 2, implying 4 bank address bits. Such a value is reserved in BA_BITS_CS, but I suspect the controller simply ignores the top bit, making this kind of mistake harmless, if misleading. Fixes: e8a7f1c32b5 ("powerpc/t1023rdb: Add T1023 RDB board support") Signed-off-by: Sean Anderson Signed-off-by: Peng Fan --- board/freescale/ls1043ardb/ddr.c | 2 +- drivers/ddr/fsl/ctrl_regs.c | 2 +- drivers/ddr/fsl/ddr4_dimm_params.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/board/freescale/ls1043ardb/ddr.c b/board/freescale/ls1043ardb/ddr.c index 08b43ff5e4..4d2fce3841 100644 --- a/board/freescale/ls1043ardb/ddr.c +++ b/board/freescale/ls1043ardb/ddr.c @@ -114,7 +114,7 @@ dimm_params_t ddr_raw_timing = { .mirrored_dimm = 0, .n_row_addr = 15, .n_col_addr = 10, - .bank_addr_bits = 0, + .bank_addr_bits = 2, .bank_group_bits = 2, .edc_config = 0, .burst_lengths_bitmask = 0x0c, diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c index b5122d1a1c..0b0b4e5cb7 100644 --- a/drivers/ddr/fsl/ctrl_regs.c +++ b/drivers/ddr/fsl/ctrl_regs.c @@ -214,7 +214,7 @@ static void set_csn_config(int dimm_number, int i, fsl_ddr_cfg_regs_t *ddr, odt_rd_cfg = popts->cs_local_opts[i].odt_rd_cfg; odt_wr_cfg = popts->cs_local_opts[i].odt_wr_cfg; #ifdef CONFIG_SYS_FSL_DDR4 - ba_bits_cs_n = dimm_params[dimm_number].bank_addr_bits; + ba_bits_cs_n = dimm_params[dimm_number].bank_addr_bits - 2; bg_bits_cs_n = dimm_params[dimm_number].bank_group_bits; #else n_banks_per_sdram_device diff --git a/drivers/ddr/fsl/ddr4_dimm_params.c b/drivers/ddr/fsl/ddr4_dimm_params.c index e2bdc12ef2..ea79162262 100644 --- a/drivers/ddr/fsl/ddr4_dimm_params.c +++ b/drivers/ddr/fsl/ddr4_dimm_params.c @@ -246,7 +246,7 @@ unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num, /* SDRAM device parameters */ pdimm->n_row_addr = ((spd->addressing >> 3) & 0x7) + 12; pdimm->n_col_addr = (spd->addressing & 0x7) + 9; - pdimm->bank_addr_bits = (spd->density_banks >> 4) & 0x3; + pdimm->bank_addr_bits = ((spd->density_banks >> 4) & 0x3) + 2; pdimm->bank_group_bits = (spd->density_banks >> 6) & 0x3; /* -- 2.39.5