From 0d172d2a0f1c0fdf5513bb8e7f0a1930424594c3 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Tue, 26 May 2020 14:36:50 -0400 Subject: [PATCH] powerpc: Remove ARCH= references from documentation When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. Cc: Po Liu Cc: Qiang Zhao Signed-off-by: Tom Rini --- board/freescale/c29xpcie/README | 1 - board/freescale/p1010rdb/README.P1010RDB-PA | 1 - board/freescale/p1010rdb/README.P1010RDB-PB | 1 - 3 files changed, 3 deletions(-) diff --git a/board/freescale/c29xpcie/README b/board/freescale/c29xpcie/README index 2e249cbb3a..a6120f1845 100644 --- a/board/freescale/c29xpcie/README +++ b/board/freescale/c29xpcie/README @@ -56,7 +56,6 @@ Note: 1 stands for 'off', 0 stands for 'on' Build and program U-Boot to NOR flash ================================== 1. Build u-boot.bin image example: - export ARCH=powerpc export CROSS_COMPILE=/your_path/powerpc-linux-gnu- make C293PCIE diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA index 105942f7a5..46c61237c7 100644 --- a/board/freescale/p1010rdb/README.P1010RDB-PA +++ b/board/freescale/p1010rdb/README.P1010RDB-PA @@ -98,7 +98,6 @@ instead of to CAN/UART1. Build and burn U-Boot to NOR flash ================================== 1. Build u-boot.bin image - export ARCH=powerpc export CROSS_COMPILE=/your_path/powerpc-linux-gnu- make P1010RDB_NOR diff --git a/board/freescale/p1010rdb/README.P1010RDB-PB b/board/freescale/p1010rdb/README.P1010RDB-PB index dc82f0df09..4a3b389877 100644 --- a/board/freescale/p1010rdb/README.P1010RDB-PB +++ b/board/freescale/p1010rdb/README.P1010RDB-PB @@ -128,7 +128,6 @@ To enable IFC in case of SD boot Build images for different boot mode ==================================== First setup cross compile environment on build host - $ export ARCH=powerpc $ export CROSS_COMPILE=/powerpc-linux-gnu- 1. For NOR boot -- 2.39.5