From 0d158e01813802f07714c9dbe72c38bc1af13cb4 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 26 Sep 2022 13:40:09 -0300 Subject: [PATCH] clk-imx8mm: Move CLK_ENET_AXI to the non-SPL section Ethernet is not used inside SPL, so move the IMX8MM_CLK_ENET_AXI clock inside the non-SPL block to reduce the final SPL binary size. Signed-off-by: Fabio Estevam --- drivers/clk/imx/clk-imx8mm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c index 0d7891f11a..286915982c 100644 --- a/drivers/clk/imx/clk-imx8mm.c +++ b/drivers/clk/imx/clk-imx8mm.c @@ -28,10 +28,10 @@ static const char *imx8mm_a53_sels[] = {"clock-osc-24m", "arm_pll_out", "sys_pll static const char *imx8mm_ahb_sels[] = {"clock-osc-24m", "sys_pll1_133m", "sys_pll1_800m", "sys_pll1_400m", "sys_pll2_125m", "sys_pll3_out", "audio_pll1_out", "video_pll1_out", }; +#ifndef CONFIG_SPL_BUILD static const char *imx8mm_enet_axi_sels[] = {"clock-osc-24m", "sys_pll1_266m", "sys_pll1_800m", "sys_pll2_250m", "sys_pll2_200m", "audio_pll1_out", "video_pll1_out", "sys_pll3_out", }; -#ifndef CONFIG_SPL_BUILD static const char *imx8mm_enet_ref_sels[] = {"clock-osc-24m", "sys_pll2_125m", "sys_pll2_50m", "sys_pll2_100m", "sys_pll1_160m", "audio_pll1_out", "video_pll1_out", "clk_ext4", }; @@ -244,9 +244,6 @@ static int imx8mm_clk_probe(struct udevice *dev) clk_dm(IMX8MM_CLK_IPG_ROOT, imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1)); - clk_dm(IMX8MM_CLK_ENET_AXI, - imx8m_clk_composite("enet_axi", imx8mm_enet_axi_sels, - base + 0x8880)); clk_dm(IMX8MM_CLK_NAND_USDHC_BUS, imx8m_clk_composite_critical("nand_usdhc_bus", imx8mm_nand_usdhc_sels, @@ -322,6 +319,9 @@ static int imx8mm_clk_probe(struct udevice *dev) /* clks not needed in SPL stage */ #ifndef CONFIG_SPL_BUILD + clk_dm(IMX8MM_CLK_ENET_AXI, + imx8m_clk_composite("enet_axi", imx8mm_enet_axi_sels, + base + 0x8880)); clk_dm(IMX8MM_CLK_ENET_REF, imx8m_clk_composite("enet_ref", imx8mm_enet_ref_sels, base + 0xa980)); -- 2.39.5