From 01a701994b0590b6452516a7c67353359d053c94 Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Fri, 27 Oct 2023 16:43:04 +0200 Subject: [PATCH] stm32mp2: initial support Add initial support for STM32MP2 SoCs family. SoCs information are available here : https://www.st.com/content/st_com/en/campaigns/microprocessor-stm32mp2.html Migrate all MP1 related code into stm32mp1/ directory Create stm32mp2 directory dedicated for STM32MP2 SoCs. Common code to MP1, MP13 and MP25 is kept into arch/arm/mach-stm32/mach-stm32mp directory : - boot_params.c - bsec - cmd_stm32key - cmd_stm32prog - dram_init.c - syscon.c - ecdsa_romapi.c For STM32MP2, it also : - adds memory region description needed for ARMv8 MMU. - enables early data cache before relocation. During the transition before/after relocation, the MMU, initially setup at the beginning of DDR, must be setup again at a correct address after relocation. This is done in enables_caches() by disabling cache, force arch.tlb_fillptr to NULL which will force the MMU to be setup again but with a new value for gd->arch.tlb_addr. gd->arch.tlb_addr has been updated after relocation in arm_reserve_mmu(). Signed-off-by: Patrice Chotard Reviewed-by: Patrick Delaunay --- arch/arm/Kconfig | 2 +- arch/arm/mach-stm32mp/Kconfig | 26 ++- arch/arm/mach-stm32mp/Kconfig.25x | 43 ++++ arch/arm/mach-stm32mp/Makefile | 15 +- arch/arm/mach-stm32mp/include/mach/stm32.h | 141 ++++++++----- .../arm/mach-stm32mp/include/mach/sys_proto.h | 26 +++ arch/arm/mach-stm32mp/stm32mp1/Makefile | 20 ++ arch/arm/mach-stm32mp/{ => stm32mp1}/cpu.c | 0 arch/arm/mach-stm32mp/{ => stm32mp1}/fdt.c | 0 arch/arm/mach-stm32mp/{ => stm32mp1}/psci.c | 0 .../{ => stm32mp1}/pwr_regulator.c | 0 arch/arm/mach-stm32mp/{ => stm32mp1}/spl.c | 0 .../mach-stm32mp/{ => stm32mp1}/stm32mp13x.c | 0 .../mach-stm32mp/{ => stm32mp1}/stm32mp15x.c | 0 arch/arm/mach-stm32mp/{ => stm32mp1}/tzc400.c | 0 arch/arm/mach-stm32mp/stm32mp2/Makefile | 9 + arch/arm/mach-stm32mp/stm32mp2/arm64-mmu.c | 68 ++++++ arch/arm/mach-stm32mp/stm32mp2/cpu.c | 108 ++++++++++ arch/arm/mach-stm32mp/stm32mp2/fdt.c | 16 ++ arch/arm/mach-stm32mp/stm32mp2/stm32mp25x.c | 194 ++++++++++++++++++ arch/arm/mach-stm32mp/syscon.c | 4 +- board/st/stm32mp2/Kconfig | 13 ++ board/st/stm32mp2/MAINTAINERS | 9 + board/st/stm32mp2/Makefile | 6 + board/st/stm32mp2/stm32mp2.c | 52 +++++ configs/stm32mp25_defconfig | 52 +++++ include/configs/stm32mp25_common.h | 24 +++ 27 files changed, 757 insertions(+), 71 deletions(-) create mode 100644 arch/arm/mach-stm32mp/Kconfig.25x create mode 100644 arch/arm/mach-stm32mp/stm32mp1/Makefile rename arch/arm/mach-stm32mp/{ => stm32mp1}/cpu.c (100%) rename arch/arm/mach-stm32mp/{ => stm32mp1}/fdt.c (100%) rename arch/arm/mach-stm32mp/{ => stm32mp1}/psci.c (100%) rename arch/arm/mach-stm32mp/{ => stm32mp1}/pwr_regulator.c (100%) rename arch/arm/mach-stm32mp/{ => stm32mp1}/spl.c (100%) rename arch/arm/mach-stm32mp/{ => stm32mp1}/stm32mp13x.c (100%) rename arch/arm/mach-stm32mp/{ => stm32mp1}/stm32mp15x.c (100%) rename arch/arm/mach-stm32mp/{ => stm32mp1}/tzc400.c (100%) create mode 100644 arch/arm/mach-stm32mp/stm32mp2/Makefile create mode 100644 arch/arm/mach-stm32mp/stm32mp2/arm64-mmu.c create mode 100644 arch/arm/mach-stm32mp/stm32mp2/cpu.c create mode 100644 arch/arm/mach-stm32mp/stm32mp2/fdt.c create mode 100644 arch/arm/mach-stm32mp/stm32mp2/stm32mp25x.c create mode 100644 board/st/stm32mp2/Kconfig create mode 100644 board/st/stm32mp2/MAINTAINERS create mode 100644 board/st/stm32mp2/Makefile create mode 100644 board/st/stm32mp2/stm32mp2.c create mode 100644 configs/stm32mp25_defconfig create mode 100644 include/configs/stm32mp25_common.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6009b7d46d..a6f00187e9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1944,7 +1944,7 @@ config ARCH_STM32MP select REGMAP select SYSCON select SYSRESET - select SYS_THUMB_BUILD + select SYS_THUMB_BUILD if !ARM64 imply SPL_SYSRESET imply CMD_DM imply CMD_POWEROFF diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig index db47baba6d..5fc92d07fe 100644 --- a/arch/arm/mach-stm32mp/Kconfig +++ b/arch/arm/mach-stm32mp/Kconfig @@ -76,6 +76,30 @@ config STM32MP15x STM32MP157, STM32MP153 or STM32MP151 STMicroelectronics MPU with core ARMv7 dual core A7 for STM32MP157/3, monocore for STM32MP151 + +config STM32MP25X + bool "Support STMicroelectronics STM32MP25x Soc" + select ARM64 + select CLK_STM32MP25 + select OF_BOARD + select PINCTRL_STM32 + select STM32_RCC + select STM32_RESET + select STM32_SERIAL + select SYS_ARCH_TIMER + select TFABOOT + imply CLK_SCMI + imply CMD_NVEDIT_INFO + imply DM_REGULATOR + imply DM_REGULATOR_SCMI + imply OPTEE + imply RESET_SCMI + imply SYSRESET_PSCI + imply TEE + imply VERSION_VARIABLE + help + Support of STMicroelectronics SOC STM32MP25x family + STMicroelectronics MPU with 2 * A53 core and 1 M33 core endchoice config NR_DRAM_BANKS @@ -128,6 +152,6 @@ config CMD_STM32KEY source "arch/arm/mach-stm32mp/Kconfig.13x" source "arch/arm/mach-stm32mp/Kconfig.15x" - +source "arch/arm/mach-stm32mp/Kconfig.25x" source "arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig" endif diff --git a/arch/arm/mach-stm32mp/Kconfig.25x b/arch/arm/mach-stm32mp/Kconfig.25x new file mode 100644 index 0000000000..2c0f691f8b --- /dev/null +++ b/arch/arm/mach-stm32mp/Kconfig.25x @@ -0,0 +1,43 @@ +if STM32MP25X + +choice + prompt "STM32MP25x board select" + optional + +config TARGET_ST_STM32MP25X + bool "STMicroelectronics STM32MP25x boards" + imply BOOTSTAGE + imply CMD_BOOTSTAGE + help + target the STMicroelectronics board with SOC STM32MP25x + managed by board/st/stm32mp2 + The difference between board are managed with devicetree + +endchoice + +config TEXT_BASE + default 0x84000000 + +config PRE_CON_BUF_ADDR + default 0x84800000 + +config PRE_CON_BUF_SZ + default 4096 + +config BOOTSTAGE_STASH_ADDR + default 0x87000000 + +if DEBUG_UART + +config DEBUG_UART_BOARD_INIT + default y + +# debug on USART2 by default +config DEBUG_UART_BASE + default 0x400e0000 + +endif + +source "board/st/stm32mp2/Kconfig" + +endif diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile index a19b2797c8..00dc25bb27 100644 --- a/arch/arm/mach-stm32mp/Makefile +++ b/arch/arm/mach-stm32mp/Makefile @@ -3,24 +3,17 @@ # Copyright (C) 2018, STMicroelectronics - All Rights Reserved # -obj-y += cpu.o obj-y += dram_init.o obj-y += syscon.o obj-y += bsec.o -obj-$(CONFIG_STM32MP13x) += stm32mp13x.o -obj-$(CONFIG_STM32MP15x) += stm32mp15x.o +obj-$(CONFIG_STM32MP15x) += stm32mp1/ +obj-$(CONFIG_STM32MP13x) += stm32mp1/ +obj-$(CONFIG_STM32MP25X) += stm32mp2/ obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o -ifdef CONFIG_SPL_BUILD -obj-y += spl.o -obj-y += tzc400.o -else +ifndef CONFIG_SPL_BUILD obj-y += cmd_stm32prog/ obj-$(CONFIG_CMD_STM32KEY) += cmd_stm32key.o -obj-$(CONFIG_ARMV7_PSCI) += psci.o obj-$(CONFIG_TFABOOT) += boot_params.o endif - -obj-$(CONFIG_$(SPL_)STM32MP15_PWR) += pwr_regulator.o -obj-$(CONFIG_OF_SYSTEM_SETUP) += fdt.o diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h index 1cdc5e3b18..ce9d795651 100644 --- a/arch/arm/mach-stm32mp/include/mach/stm32.h +++ b/arch/arm/mach-stm32mp/include/mach/stm32.h @@ -8,12 +8,66 @@ #ifndef __ASSEMBLY__ #include + +enum boot_device { + BOOT_FLASH_SD = 0x10, + BOOT_FLASH_SD_1 = 0x11, + BOOT_FLASH_SD_2 = 0x12, + BOOT_FLASH_SD_3 = 0x13, + + BOOT_FLASH_EMMC = 0x20, + BOOT_FLASH_EMMC_1 = 0x21, + BOOT_FLASH_EMMC_2 = 0x22, + BOOT_FLASH_EMMC_3 = 0x23, + + BOOT_FLASH_NAND = 0x30, + BOOT_FLASH_NAND_FMC = 0x31, + + BOOT_FLASH_NOR = 0x40, + BOOT_FLASH_NOR_QSPI = 0x41, + + BOOT_SERIAL_UART = 0x50, + BOOT_SERIAL_UART_1 = 0x51, + BOOT_SERIAL_UART_2 = 0x52, + BOOT_SERIAL_UART_3 = 0x53, + BOOT_SERIAL_UART_4 = 0x54, + BOOT_SERIAL_UART_5 = 0x55, + BOOT_SERIAL_UART_6 = 0x56, + BOOT_SERIAL_UART_7 = 0x57, + BOOT_SERIAL_UART_8 = 0x58, + + BOOT_SERIAL_USB = 0x60, + BOOT_SERIAL_USB_OTG = 0x62, + + BOOT_FLASH_SPINAND = 0x70, + BOOT_FLASH_SPINAND_1 = 0x71, +}; + +#define TAMP_BOOT_MODE_MASK GENMASK(15, 8) +#define TAMP_BOOT_MODE_SHIFT 8 +#define TAMP_BOOT_DEVICE_MASK GENMASK(7, 4) +#define TAMP_BOOT_INSTANCE_MASK GENMASK(3, 0) +#define TAMP_BOOT_FORCED_MASK GENMASK(7, 0) +#define TAMP_BOOT_DEBUG_ON BIT(16) + +enum forced_boot_mode { + BOOT_NORMAL = 0x00, + BOOT_FASTBOOT = 0x01, + BOOT_RECOVERY = 0x02, + BOOT_STM32PROG = 0x03, + BOOT_UMS_MMC0 = 0x10, + BOOT_UMS_MMC1 = 0x11, + BOOT_UMS_MMC2 = 0x12, +}; + #endif /* * Peripheral memory map * only address used before device tree parsing */ + +#if defined(CONFIG_STM32MP15x) || defined(CONFIG_STM32MP13x) #define STM32_RCC_BASE 0x50000000 #define STM32_PWR_BASE 0x50001000 #define STM32_SYSCFG_BASE 0x50020000 @@ -58,12 +112,6 @@ #define STM32_DDR_SIZE SZ_1G #ifndef __ASSEMBLY__ -/* enumerated used to identify the SYSCON driver instance */ -enum { - STM32MP_SYSCON_UNKNOWN, - STM32MP_SYSCON_SYSCFG, -}; - /* * enumerated for boot interface from Bootrom, used in TAMP_BOOT_CONTEXT * - boot device = bit 8:4 @@ -74,40 +122,6 @@ enum { #define BOOT_INSTANCE_MASK 0x0F #define BOOT_INSTANCE_SHIFT 0 -enum boot_device { - BOOT_FLASH_SD = 0x10, - BOOT_FLASH_SD_1 = 0x11, - BOOT_FLASH_SD_2 = 0x12, - BOOT_FLASH_SD_3 = 0x13, - - BOOT_FLASH_EMMC = 0x20, - BOOT_FLASH_EMMC_1 = 0x21, - BOOT_FLASH_EMMC_2 = 0x22, - BOOT_FLASH_EMMC_3 = 0x23, - - BOOT_FLASH_NAND = 0x30, - BOOT_FLASH_NAND_FMC = 0x31, - - BOOT_FLASH_NOR = 0x40, - BOOT_FLASH_NOR_QSPI = 0x41, - - BOOT_SERIAL_UART = 0x50, - BOOT_SERIAL_UART_1 = 0x51, - BOOT_SERIAL_UART_2 = 0x52, - BOOT_SERIAL_UART_3 = 0x53, - BOOT_SERIAL_UART_4 = 0x54, - BOOT_SERIAL_UART_5 = 0x55, - BOOT_SERIAL_UART_6 = 0x56, - BOOT_SERIAL_UART_7 = 0x57, - BOOT_SERIAL_UART_8 = 0x58, - - BOOT_SERIAL_USB = 0x60, - BOOT_SERIAL_USB_OTG = 0x62, - - BOOT_FLASH_SPINAND = 0x70, - BOOT_FLASH_SPINAND_1 = 0x71, -}; - /* TAMP registers */ #define TAMP_BACKUP_REGISTER(x) (STM32_TAMP_BASE + 0x100 + 4 * x) @@ -123,7 +137,6 @@ enum boot_device { #define TAMP_FWU_BOOT_IDX_MASK GENMASK(3, 0) #define TAMP_FWU_BOOT_IDX_OFFSET 0 - #define TAMP_COPRO_STATE_OFF 0 #define TAMP_COPRO_STATE_INIT 1 #define TAMP_COPRO_STATE_CRUN 2 @@ -137,21 +150,23 @@ enum boot_device { #define TAMP_BOOT_CONTEXT TAMP_BACKUP_REGISTER(30) #endif -#define TAMP_BOOT_MODE_MASK GENMASK(15, 8) -#define TAMP_BOOT_MODE_SHIFT 8 -#define TAMP_BOOT_DEVICE_MASK GENMASK(7, 4) -#define TAMP_BOOT_INSTANCE_MASK GENMASK(3, 0) -#define TAMP_BOOT_FORCED_MASK GENMASK(7, 0) +#endif /* __ASSEMBLY__ */ +#endif /* CONFIG_STM32MP15X || CONFIG_STM32MP13X */ -enum forced_boot_mode { - BOOT_NORMAL = 0x00, - BOOT_FASTBOOT = 0x01, - BOOT_RECOVERY = 0x02, - BOOT_STM32PROG = 0x03, - BOOT_UMS_MMC0 = 0x10, - BOOT_UMS_MMC1 = 0x11, - BOOT_UMS_MMC2 = 0x12, -}; +#if CONFIG_STM32MP25X +#define STM32_RCC_BASE 0x44200000 +#define STM32_TAMP_BASE 0x46010000 + +#define STM32_DDR_BASE 0x80000000 + +#define STM32_DDR_SIZE SZ_4G + +/* TAMP registers x = 0 to 127 : hardcoded description, waiting NVMEM node in DT */ +#define TAMP_BACKUP_REGISTER(x) (STM32_TAMP_BASE + 0x100 + 4 * (x)) + +/* TAMP registers zone 3 RIF 1 (RW) at 96*/ +#define TAMP_BOOT_CONTEXT TAMP_BACKUP_REGISTER(96) +#endif /* STM32MP25X */ /* offset used for BSEC driver: misc_read and misc_write */ #define STM32_BSEC_SHADOW_OFFSET 0x0 @@ -175,6 +190,20 @@ enum forced_boot_mode { #define BSEC_OTP_MAC 57 #define BSEC_OTP_BOARD 60 #endif +#ifdef CONFIG_STM32MP25X +#define BSEC_OTP_SERIAL 5 +#define BSEC_OTP_RPN 9 +#define BSEC_OTP_PKG 246 +#endif + +#ifndef __ASSEMBLY__ +#include + +/* enumerated used to identify the SYSCON driver instance */ +enum { + STM32MP_SYSCON_UNKNOWN, + STM32MP_SYSCON_SYSCFG, +}; +#endif /* __ASSEMBLY__*/ -#endif /* __ASSEMBLY__ */ #endif /* _MACH_STM32_H_ */ diff --git a/arch/arm/mach-stm32mp/include/mach/sys_proto.h b/arch/arm/mach-stm32mp/include/mach/sys_proto.h index 83fb32a45f..7b2df09a33 100644 --- a/arch/arm/mach-stm32mp/include/mach/sys_proto.h +++ b/arch/arm/mach-stm32mp/include/mach/sys_proto.h @@ -30,11 +30,30 @@ #define CPU_STM32MP131Fxx 0x05010EC8 #define CPU_STM32MP131Dxx 0x05010EC9 +/* ID for STM32MP25x = Device Part Number (RPN) (bit31:0) */ +#define CPU_STM32MP257Cxx 0x00002000 +#define CPU_STM32MP255Cxx 0x00082000 +#define CPU_STM32MP253Cxx 0x000B2004 +#define CPU_STM32MP251Cxx 0x000B3065 +#define CPU_STM32MP257Axx 0x40002E00 +#define CPU_STM32MP255Axx 0x40082E00 +#define CPU_STM32MP253Axx 0x400B2E04 +#define CPU_STM32MP251Axx 0x400B3E65 +#define CPU_STM32MP257Fxx 0x80002000 +#define CPU_STM32MP255Fxx 0x80082000 +#define CPU_STM32MP253Fxx 0x800B2004 +#define CPU_STM32MP251Fxx 0x800B3065 +#define CPU_STM32MP257Dxx 0xC0002E00 +#define CPU_STM32MP255Dxx 0xC0082E00 +#define CPU_STM32MP253Dxx 0xC00B2E04 +#define CPU_STM32MP251Dxx 0xC00B3E65 + /* return CPU_STMP32MP...Xxx constants */ u32 get_cpu_type(void); #define CPU_DEV_STM32MP15 0x500 #define CPU_DEV_STM32MP13 0x501 +#define CPU_DEV_STM32MP25 0x505 /* return CPU_DEV constants */ u32 get_cpu_dev(void); @@ -59,6 +78,13 @@ u32 get_cpu_package(void); #define STM32MP15_PKG_AD_TFBGA257 1 #define STM32MP15_PKG_UNKNOWN 0 +/* package used for STM32MP25x */ +#define STM32MP25_PKG_CUSTOM 0 +#define STM32MP25_PKG_AL_TBGA361 3 +#define STM32MP25_PKG_AK_TBGA424 4 +#define STM32MP25_PKG_AI_TBGA436 5 +#define STM32MP25_PKG_UNKNOWN 7 + /* Get SOC name */ #define SOC_NAME_SIZE 20 void get_soc_name(char name[SOC_NAME_SIZE]); diff --git a/arch/arm/mach-stm32mp/stm32mp1/Makefile b/arch/arm/mach-stm32mp/stm32mp1/Makefile new file mode 100644 index 0000000000..94c7724127 --- /dev/null +++ b/arch/arm/mach-stm32mp/stm32mp1/Makefile @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2018, STMicroelectronics - All Rights Reserved +# + +obj-y += cpu.o + +obj-$(CONFIG_STM32MP13x) += stm32mp13x.o +obj-$(CONFIG_STM32MP15x) += stm32mp15x.o + +obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-y += tzc400.o +else +obj-$(CONFIG_ARMV7_PSCI) += psci.o +endif + +obj-$(CONFIG_$(SPL_)STM32MP15_PWR) += pwr_regulator.o +obj-$(CONFIG_OF_SYSTEM_SETUP) += fdt.o diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/stm32mp1/cpu.c similarity index 100% rename from arch/arm/mach-stm32mp/cpu.c rename to arch/arm/mach-stm32mp/stm32mp1/cpu.c diff --git a/arch/arm/mach-stm32mp/fdt.c b/arch/arm/mach-stm32mp/stm32mp1/fdt.c similarity index 100% rename from arch/arm/mach-stm32mp/fdt.c rename to arch/arm/mach-stm32mp/stm32mp1/fdt.c diff --git a/arch/arm/mach-stm32mp/psci.c b/arch/arm/mach-stm32mp/stm32mp1/psci.c similarity index 100% rename from arch/arm/mach-stm32mp/psci.c rename to arch/arm/mach-stm32mp/stm32mp1/psci.c diff --git a/arch/arm/mach-stm32mp/pwr_regulator.c b/arch/arm/mach-stm32mp/stm32mp1/pwr_regulator.c similarity index 100% rename from arch/arm/mach-stm32mp/pwr_regulator.c rename to arch/arm/mach-stm32mp/stm32mp1/pwr_regulator.c diff --git a/arch/arm/mach-stm32mp/spl.c b/arch/arm/mach-stm32mp/stm32mp1/spl.c similarity index 100% rename from arch/arm/mach-stm32mp/spl.c rename to arch/arm/mach-stm32mp/stm32mp1/spl.c diff --git a/arch/arm/mach-stm32mp/stm32mp13x.c b/arch/arm/mach-stm32mp/stm32mp1/stm32mp13x.c similarity index 100% rename from arch/arm/mach-stm32mp/stm32mp13x.c rename to arch/arm/mach-stm32mp/stm32mp1/stm32mp13x.c diff --git a/arch/arm/mach-stm32mp/stm32mp15x.c b/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c similarity index 100% rename from arch/arm/mach-stm32mp/stm32mp15x.c rename to arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c diff --git a/arch/arm/mach-stm32mp/tzc400.c b/arch/arm/mach-stm32mp/stm32mp1/tzc400.c similarity index 100% rename from arch/arm/mach-stm32mp/tzc400.c rename to arch/arm/mach-stm32mp/stm32mp1/tzc400.c diff --git a/arch/arm/mach-stm32mp/stm32mp2/Makefile b/arch/arm/mach-stm32mp/stm32mp2/Makefile new file mode 100644 index 0000000000..b579ce5a80 --- /dev/null +++ b/arch/arm/mach-stm32mp/stm32mp2/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +# +# Copyright (C) 2023, STMicroelectronics - All Rights Reserved +# + +obj-y += cpu.o +obj-y += arm64-mmu.o +obj-$(CONFIG_OF_SYSTEM_SETUP) += fdt.o +obj-$(CONFIG_STM32MP25X) += stm32mp25x.o diff --git a/arch/arm/mach-stm32mp/stm32mp2/arm64-mmu.c b/arch/arm/mach-stm32mp/stm32mp2/arm64-mmu.c new file mode 100644 index 0000000000..a203eebdc5 --- /dev/null +++ b/arch/arm/mach-stm32mp/stm32mp2/arm64-mmu.c @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/* + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved + */ + +#include +#include +#include + +#define MP2_MEM_MAP_MAX 10 + +#if (CONFIG_TEXT_BASE < STM32_DDR_BASE) || \ + (CONFIG_TEXT_BASE > (STM32_DDR_BASE + STM32_DDR_SIZE)) +#error "invalid CONFIG_TEXT_BASE value" +#endif + +struct mm_region stm32mp2_mem_map[MP2_MEM_MAP_MAX] = { + { + /* PCIe */ + .virt = 0x10000000UL, + .phys = 0x10000000UL, + .size = 0x10000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* LPSRAMs, VDERAM, RETRAM, SRAMs, SYSRAM: alias1 */ + .virt = 0x20000000UL, + .phys = 0x20000000UL, + .size = 0x00200000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* Peripherals: alias1 */ + .virt = 0x40000000UL, + .phys = 0x40000000UL, + .size = 0x10000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* OSPI and FMC: memory-map area */ + .virt = 0x60000000UL, + .phys = 0x60000000UL, + .size = 0x20000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* + * DDR = STM32_DDR_BASE / STM32_DDR_SIZE + * the beginning of DDR (before CONFIG_TEXT_BASE) is not + * mapped, protected by RIF and reserved for other firmware + * (OP-TEE / TF-M / Cube M33) + */ + .virt = CONFIG_TEXT_BASE, + .phys = CONFIG_TEXT_BASE, + .size = STM32_DDR_SIZE - (CONFIG_TEXT_BASE - STM32_DDR_BASE), + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE + }, { + /* List terminator */ + 0, + } +}; + +struct mm_region *mem_map = stm32mp2_mem_map; diff --git a/arch/arm/mach-stm32mp/stm32mp2/cpu.c b/arch/arm/mach-stm32mp/stm32mp2/cpu.c new file mode 100644 index 0000000000..5bfeab17ab --- /dev/null +++ b/arch/arm/mach-stm32mp/stm32mp2/cpu.c @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/* + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved + */ + +#define LOG_CATEGORY LOGC_ARCH + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * early TLB into the .data section so that it not get cleared + * with 16kB alignment + */ +#define EARLY_TLB_SIZE 0xA000 +u8 early_tlb[EARLY_TLB_SIZE] __section(".data") __aligned(0x4000); + +/* + * initialize the MMU and activate cache in U-Boot pre-reloc stage + * MMU/TLB is updated in enable_caches() for U-Boot after relocation + */ +static void early_enable_caches(void) +{ + if (CONFIG_IS_ENABLED(SYS_DCACHE_OFF)) + return; + + if (!(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))) { + gd->arch.tlb_size = EARLY_TLB_SIZE; + gd->arch.tlb_addr = (unsigned long)&early_tlb; + } + /* enable MMU (default configuration) */ + dcache_enable(); +} + +/* + * Early system init + */ +int arch_cpu_init(void) +{ + icache_enable(); + early_enable_caches(); + + return 0; +} + +void enable_caches(void) +{ + /* deactivate the data cache, early enabled in arch_cpu_init() */ + dcache_disable(); + /* + * Force the call of setup_all_pgtables() in mmu_setup() by clearing tlb_fillptr + * to update the TLB location udpated in board_f.c::reserve_mmu + */ + gd->arch.tlb_fillptr = 0; + dcache_enable(); +} + +/* used when CONFIG_DISPLAY_CPUINFO is activated */ +int print_cpuinfo(void) +{ + char name[SOC_NAME_SIZE]; + + get_soc_name(name); + printf("CPU: %s\n", name); + + return 0; +} + +int arch_misc_init(void) +{ + return 0; +} + +/* + * Force data-section, as .bss will not be valid + * when save_boot_params is invoked. + */ +static uintptr_t nt_fw_dtb __section(".data"); + +uintptr_t get_stm32mp_bl2_dtb(void) +{ + return nt_fw_dtb; +} + +/* + * Save the FDT address provided by TF-A in r2 at boot time + * This function is called from start.S + */ +void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2, + unsigned long r3) +{ + nt_fw_dtb = r2; + + save_boot_params_ret(); +} diff --git a/arch/arm/mach-stm32mp/stm32mp2/fdt.c b/arch/arm/mach-stm32mp/stm32mp2/fdt.c new file mode 100644 index 0000000000..ee570863bb --- /dev/null +++ b/arch/arm/mach-stm32mp/stm32mp2/fdt.c @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/* + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved + */ + +#include + +/* + * This function is called right before the kernel is booted. "blob" is the + * device tree that will be passed to the kernel. + */ +int ft_system_setup(void *blob, struct bd_info *bd) +{ + return 0; +} + diff --git a/arch/arm/mach-stm32mp/stm32mp2/stm32mp25x.c b/arch/arm/mach-stm32mp/stm32mp2/stm32mp25x.c new file mode 100644 index 0000000000..7d2dab2201 --- /dev/null +++ b/arch/arm/mach-stm32mp/stm32mp2/stm32mp25x.c @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/* + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved + */ + +#define LOG_CATEGORY LOGC_ARCH + +#include +#include +#include +#include +#include +#include + +/* SYSCFG register */ +#define SYSCFG_DEVICEID_OFFSET 0x6400 +#define SYSCFG_DEVICEID_DEV_ID_MASK GENMASK(11, 0) +#define SYSCFG_DEVICEID_DEV_ID_SHIFT 0 +#define SYSCFG_DEVICEID_REV_ID_MASK GENMASK(31, 16) +#define SYSCFG_DEVICEID_REV_ID_SHIFT 16 + +/* Device Part Number (RPN) = OTP9 */ +#define RPN_SHIFT 0 +#define RPN_MASK GENMASK(31, 0) + +/* Package = bit 0:2 of OTP122 => STM32MP25_PKG defines + * - 000: Custom package + * - 011: TFBGA361 => AL = 10x10, 361 balls pith 0.5mm + * - 100: TFBGA424 => AK = 14x14, 424 balls pith 0.5mm + * - 101: TFBGA436 => AI = 18x18, 436 balls pith 0.5mm + * - others: Reserved + */ +#define PKG_SHIFT 0 +#define PKG_MASK GENMASK(2, 0) + +static u32 read_deviceid(void) +{ + void *syscfg = syscon_get_first_range(STM32MP_SYSCON_SYSCFG); + + return readl(syscfg + SYSCFG_DEVICEID_OFFSET); +} + +u32 get_cpu_dev(void) +{ + return (read_deviceid() & SYSCFG_DEVICEID_DEV_ID_MASK) >> SYSCFG_DEVICEID_DEV_ID_SHIFT; +} + +u32 get_cpu_rev(void) +{ + return (read_deviceid() & SYSCFG_DEVICEID_REV_ID_MASK) >> SYSCFG_DEVICEID_REV_ID_SHIFT; +} + +/* Get Device Part Number (RPN) from OTP */ +u32 get_cpu_type(void) +{ + return get_otp(BSEC_OTP_RPN, RPN_SHIFT, RPN_MASK); +} + +/* Get Package options from OTP */ +u32 get_cpu_package(void) +{ + return get_otp(BSEC_OTP_PKG, PKG_SHIFT, PKG_MASK); +} + +int get_eth_nb(void) +{ + int nb_eth; + + switch (get_cpu_type()) { + case CPU_STM32MP257Fxx: + fallthrough; + case CPU_STM32MP257Dxx: + fallthrough; + case CPU_STM32MP257Cxx: + fallthrough; + case CPU_STM32MP257Axx: + nb_eth = 5; /* dual ETH with TSN support */ + break; + case CPU_STM32MP253Fxx: + fallthrough; + case CPU_STM32MP253Dxx: + fallthrough; + case CPU_STM32MP253Cxx: + fallthrough; + case CPU_STM32MP253Axx: + nb_eth = 2; /* dual ETH */ + break; + case CPU_STM32MP251Fxx: + fallthrough; + case CPU_STM32MP251Dxx: + fallthrough; + case CPU_STM32MP251Cxx: + fallthrough; + case CPU_STM32MP251Axx: + nb_eth = 1; /* single ETH */ + break; + default: + nb_eth = 0; + break; + } + + return nb_eth; +} + +void get_soc_name(char name[SOC_NAME_SIZE]) +{ + char *cpu_s, *cpu_r, *package; + + cpu_s = "????"; + cpu_r = "?"; + package = "??"; + if (get_cpu_dev() == CPU_DEV_STM32MP25) { + switch (get_cpu_type()) { + case CPU_STM32MP257Fxx: + cpu_s = "257F"; + break; + case CPU_STM32MP257Dxx: + cpu_s = "257D"; + break; + case CPU_STM32MP257Cxx: + cpu_s = "257C"; + break; + case CPU_STM32MP257Axx: + cpu_s = "257A"; + break; + case CPU_STM32MP255Fxx: + cpu_s = "255F"; + break; + case CPU_STM32MP255Dxx: + cpu_s = "255D"; + break; + case CPU_STM32MP255Cxx: + cpu_s = "255C"; + break; + case CPU_STM32MP255Axx: + cpu_s = "255A"; + break; + case CPU_STM32MP253Fxx: + cpu_s = "253F"; + break; + case CPU_STM32MP253Dxx: + cpu_s = "253D"; + break; + case CPU_STM32MP253Cxx: + cpu_s = "253C"; + break; + case CPU_STM32MP253Axx: + cpu_s = "253A"; + break; + case CPU_STM32MP251Fxx: + cpu_s = "251F"; + break; + case CPU_STM32MP251Dxx: + cpu_s = "251D"; + break; + case CPU_STM32MP251Cxx: + cpu_s = "251C"; + break; + case CPU_STM32MP251Axx: + cpu_s = "251A"; + break; + default: + cpu_s = "25??"; + break; + } + /* REVISION */ + switch (get_cpu_rev()) { + case CPU_REV1: + cpu_r = "A"; + break; + default: + break; + } + /* PACKAGE */ + switch (get_cpu_package()) { + case STM32MP25_PKG_CUSTOM: + package = "XX"; + break; + case STM32MP25_PKG_AL_TBGA361: + package = "AL"; + break; + case STM32MP25_PKG_AK_TBGA424: + package = "AK"; + break; + case STM32MP25_PKG_AI_TBGA436: + package = "AI"; + break; + default: + break; + } + } + + snprintf(name, SOC_NAME_SIZE, "STM32MP%s%s Rev.%s", cpu_s, package, cpu_r); +} diff --git a/arch/arm/mach-stm32mp/syscon.c b/arch/arm/mach-stm32mp/syscon.c index a0e8e1dfdc..a2e351d74a 100644 --- a/arch/arm/mach-stm32mp/syscon.c +++ b/arch/arm/mach-stm32mp/syscon.c @@ -10,8 +10,8 @@ #include static const struct udevice_id stm32mp_syscon_ids[] = { - { .compatible = "st,stm32mp157-syscfg", - .data = STM32MP_SYSCON_SYSCFG }, + { .compatible = "st,stm32mp157-syscfg", .data = STM32MP_SYSCON_SYSCFG }, + { .compatible = "st,stm32mp25-syscfg", .data = STM32MP_SYSCON_SYSCFG}, { } }; diff --git a/board/st/stm32mp2/Kconfig b/board/st/stm32mp2/Kconfig new file mode 100644 index 0000000000..89039f068a --- /dev/null +++ b/board/st/stm32mp2/Kconfig @@ -0,0 +1,13 @@ +if TARGET_ST_STM32MP25X + +config SYS_BOARD + default "stm32mp2" + +config SYS_VENDOR + default "st" + +config SYS_CONFIG_NAME + default "stm32mp25_common" + +source "board/st/common/Kconfig" +endif diff --git a/board/st/stm32mp2/MAINTAINERS b/board/st/stm32mp2/MAINTAINERS new file mode 100644 index 0000000000..e6bea910f9 --- /dev/null +++ b/board/st/stm32mp2/MAINTAINERS @@ -0,0 +1,9 @@ +STM32MP2 BOARD +M: Patrice Chotard +M: Patrick Delaunay +L: uboot-stm32@st-md-mailman.stormreply.com (moderated for non-subscribers) +S: Maintained +F: arch/arm/dts/stm32mp25* +F: board/st/stm32mp2/ +F: configs/stm32mp25_defconfig +F: include/configs/stm32mp25_common.h diff --git a/board/st/stm32mp2/Makefile b/board/st/stm32mp2/Makefile new file mode 100644 index 0000000000..50352fb71b --- /dev/null +++ b/board/st/stm32mp2/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +# +# Copyright (C) 2023, STMicroelectronics - All Rights Reserved +# + +obj-y += stm32mp2.o diff --git a/board/st/stm32mp2/stm32mp2.c b/board/st/stm32mp2/stm32mp2.c new file mode 100644 index 0000000000..132c511ce9 --- /dev/null +++ b/board/st/stm32mp2/stm32mp2.c @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/* + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved + */ + +#define LOG_CATEGORY LOGC_BOARD + +#include +#include +#include +#include +#include +#include + +/* + * Get a global data pointer + */ +DECLARE_GLOBAL_DATA_PTR; + +/* board dependent setup after realloc */ +int board_init(void) +{ + return 0; +} + +int board_late_init(void) +{ + const void *fdt_compat; + int fdt_compat_len; + char dtb_name[256]; + int buf_len; + + if (IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)) { + fdt_compat = fdt_getprop(gd->fdt_blob, 0, "compatible", + &fdt_compat_len); + if (fdt_compat && fdt_compat_len) { + if (strncmp(fdt_compat, "st,", 3) != 0) { + env_set("board_name", fdt_compat); + } else { + env_set("board_name", fdt_compat + 3); + + buf_len = sizeof(dtb_name); + strlcpy(dtb_name, fdt_compat + 3, buf_len); + buf_len -= strlen(fdt_compat + 3); + strlcat(dtb_name, ".dtb", buf_len); + env_set("fdtfile", dtb_name); + } + } + } + + return 0; +} diff --git a/configs/stm32mp25_defconfig b/configs/stm32mp25_defconfig new file mode 100644 index 0000000000..8423943f09 --- /dev/null +++ b/configs/stm32mp25_defconfig @@ -0,0 +1,52 @@ +CONFIG_ARM=y +CONFIG_ARCH_STM32MP=y +CONFIG_SYS_MALLOC_F_LEN=0x400000 +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x90000000 +CONFIG_DEFAULT_DEVICE_TREE="stm32mp257f-ev1" +CONFIG_STM32MP25X=y +CONFIG_DDR_CACHEABLE_SIZE=0x10000000 +CONFIG_TARGET_ST_STM32MP25X=y +CONFIG_SYS_LOAD_ADDR=0x84000000 +CONFIG_SYS_MEMTEST_START=0x84000000 +CONFIG_SYS_MEMTEST_END=0x88000000 +CONFIG_FIT=y +CONFIG_SYS_BOOTM_LEN=0x2000000 +CONFIG_BOOTDELAY=1 +CONFIG_LAST_STAGE_INIT=y +CONFIG_SYS_PROMPT="STM32MP> " +# CONFIG_CMD_BDI is not set +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_ADTIMG=y +# CONFIG_CMD_ELF is not set +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_NET is not set +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_RNG=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_LOG=y +CONFIG_OF_LIVE=y +CONFIG_GPIO_HOG=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_STM32F7=y +# CONFIG_MMC is not set +CONFIG_PINCONF=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_RAM=y +# CONFIG_STM32MP1_DDR is not set +CONFIG_DM_RNG=y +CONFIG_SERIAL_RX_BUFFER=y +# CONFIG_OPTEE_TA_AVB is not set +CONFIG_WDT=y +CONFIG_WDT_STM32MP=y +CONFIG_WDT_ARM_SMC=y +CONFIG_ERRNO_STR=y +# CONFIG_LMB_USE_MAX_REGIONS is not set +CONFIG_LMB_MEMORY_REGIONS=2 +CONFIG_LMB_RESERVED_REGIONS=32 diff --git a/include/configs/stm32mp25_common.h b/include/configs/stm32mp25_common.h new file mode 100644 index 0000000000..ec980eea85 --- /dev/null +++ b/include/configs/stm32mp25_common.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause */ +/* + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved + * + * Configuration settings for the STM32MP25x CPU + */ + +#ifndef __CONFIG_STM32MP25_COMMMON_H +#define __CONFIG_STM32MP25_COMMMON_H +#include +#include + +/* + * Configuration of the external SRAM memory used by U-Boot + */ +#define CFG_SYS_SDRAM_BASE STM32_DDR_BASE + +/* + * For booting Linux, use the first 256 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_SYS_BOOTMAPSZ SZ_256M + +#endif /* __CONFIG_STM32MP25_COMMMON_H */ -- 2.39.5