From: Hiago De Franco Date: Fri, 15 Mar 2024 21:56:56 +0000 (-0300) Subject: doc: board: colibri-imx8x: Update and improve documentation X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=fa0ed4c401b3325d20d5afcbd99fca177a71e41c;p=u-boot.git doc: board: colibri-imx8x: Update and improve documentation Update and improve the building documentation of Colibri iMX8X. The following changes were made: - imx-atf repository changed to nxp-imx GitHub. - imx-atf branch updated to 'lf_v2.6'. - imx-seco updated to version 5.8.7. - nxp-imx mfgtools link updated to GitHub releases. - General writing improvements. Signed-off-by: Hiago De Franco Reviewed-by: Francesco Dolcini --- diff --git a/doc/board/toradex/colibri-imx8x.rst b/doc/board/toradex/colibri-imx8x.rst index 9e61d98c6b..378b259abd 100644 --- a/doc/board/toradex/colibri-imx8x.rst +++ b/doc/board/toradex/colibri-imx8x.rst @@ -20,26 +20,35 @@ Quick Start Get and Build the ARM Trusted Firmware -------------------------------------- +Download the imx-atf repository: + +.. code-block:: bash + + $ git clone -b lf_v2.6 https://github.com/nxp-imx/imx-atf.git + +Compile it with an aarch64 toolchain: + .. code-block:: bash - $ git clone -b toradex_imx_5.4.70_2.3.0 http://git.toradex.com/cgit/imx-atf.git/ $ make PLAT=imx8qx bl31 -C imx-atf Get scfw_tcm.bin and ahab-container.img --------------------------------------- +Download imx-seco firmware and extract it: + .. code-block:: bash - $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/raw/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-colibri-scfw-tcm.bin - $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.8.1.bin - $ sh imx-seco-3.8.1.bin --auto-accept + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-5.8.7.bin + $ sh imx-seco-5.8.7.bin --auto-accept Copy the following firmware to the U-Boot folder: .. code-block:: bash - $ cp imx-atf/build/imx8qx/release/bl31.bin . - $ cp imx-seco-3.8.1/firmware/seco/mx8qxc0-ahab-container.img mx8qx-ahab-container.img + $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/raw/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-colibri-scfw-tcm.bin + $ cp ../imx-atf/build/imx8qx/release/bl31.bin . + $ cp ../imx-seco-5.8.7/firmware/seco/mx8qxc0-ahab-container.img mx8qx-ahab-container.img Build U-Boot ------------ @@ -54,7 +63,7 @@ Load the U-Boot Binary Using UUU Get the latest version of the universal update utility (uuu) aka ``mfgtools 3.0``: -https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases +https://github.com/nxp-imx/mfgtools/releases Put the module into USB recovery aka serial downloader mode, connect the USB device to your host and execute ``uuu``: