From: Hayes Wang <hayeswang@realtek.com>
Date: Tue, 16 Jun 2020 09:09:44 +0000 (+0800)
Subject: eth/r8152: reset bmu after disabling Tx/Rx
X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=d74a76234f1bbbb9c6266ebe55ce53be99a6df19;p=u-boot.git

eth/r8152: reset bmu after disabling Tx/Rx

Reset bmu after disabling Tx/Rx. This is used to clear the FIFO of
Tx/Rx. The remained data may be transferred after Tx/Rx is re-enabled.
And it results in garbage data.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---

diff --git a/drivers/usb/eth/r8152.c b/drivers/usb/eth/r8152.c
index 1845d957f9..8cefacbd7e 100644
--- a/drivers/usb/eth/r8152.c
+++ b/drivers/usb/eth/r8152.c
@@ -568,6 +568,17 @@ static void r8153_power_cut_en(struct r8152 *tp, bool enable)
 	ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
 }
 
+static void rtl_reset_bmu(struct r8152 *tp)
+{
+	u8 ocp_data;
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_RESET);
+	ocp_data &= ~(BMU_RESET_EP_IN | BMU_RESET_EP_OUT);
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
+	ocp_data |= BMU_RESET_EP_IN | BMU_RESET_EP_OUT;
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
+}
+
 static int r8152_read_mac(struct r8152 *tp, unsigned char *macaddr)
 {
 	int ret;
@@ -786,6 +797,7 @@ static void r8153_first_init(struct r8152 *tp)
 	r8153_hw_phy_cfg(tp);
 
 	rtl8152_nic_reset(tp);
+	rtl_reset_bmu(tp);
 
 	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
 	ocp_data &= ~NOW_IS_OOB;
@@ -832,6 +844,7 @@ static void r8153_enter_oob(struct r8152 *tp)
 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
 
 	rtl_disable(tp);
+	rtl_reset_bmu(tp);
 
 	rtl8152_reinit_ll(tp);
 
@@ -873,6 +886,7 @@ static void rtl8153_disable(struct r8152 *tp)
 {
 	r8153_disable_aldps(tp);
 	rtl_disable(tp);
+	rtl_reset_bmu(tp);
 }
 
 static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
diff --git a/drivers/usb/eth/r8152.h b/drivers/usb/eth/r8152.h
index 10e0da8eb1..4daf4ee87d 100644
--- a/drivers/usb/eth/r8152.h
+++ b/drivers/usb/eth/r8152.h
@@ -89,9 +89,10 @@
 #define USB_TX_DMA		0xd434
 #define USB_TOLERANCE		0xd490
 #define USB_LPM_CTRL		0xd41a
+#define USB_BMU_RESET		0xd4b0
 #define USB_UPS_CTRL		0xd800
-#define USB_MISC_0		0xd81a
 #define USB_POWER_CUT		0xd80a
+#define USB_MISC_0		0xd81a
 #define USB_AFE_CTRL2		0xd824
 #define USB_WDT11_CTRL		0xe43c
 #define USB_BP_BA		0xfc26
@@ -324,6 +325,10 @@
 #define TEST_MODE_DISABLE	0x00000001
 #define TX_SIZE_ADJUST1		0x00000100
 
+/* USB_BMU_RESET */
+#define BMU_RESET_EP_IN		0x01
+#define BMU_RESET_EP_OUT	0x02
+
 /* USB_UPS_CTRL */
 #define POWER_CUT		0x0100