From: Wolfgang Wegner <w.wegner@astro-kom.de>
Date: Tue, 2 Mar 2010 09:59:20 +0000 (+0100)
Subject: allow MCF532x to use CONFIG_MONITOR_IS_IN_RAM
X-Git-Tag: v2025.01-rc5-pxa1908~20454^2
X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=c7de810c79a00aa6fc08900ee0bb57bd295db733;p=u-boot.git

allow MCF532x to use CONFIG_MONITOR_IS_IN_RAM

CONFIG_MONITOR_IS_IN_RAM is broken for MCF532x. This patch fixes this
 by conditionally
- removing the vector table at the beginning of code
- not overwriting the vector base register
- removing the code to re-set the PLL, which effectively disables
  SDRAM access

Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>
---

diff --git a/cpu/mcf532x/speed.c b/cpu/mcf532x/speed.c
index 0d378e63d4..67f08c7602 100644
--- a/cpu/mcf532x/speed.c
+++ b/cpu/mcf532x/speed.c
@@ -204,6 +204,8 @@ int clock_pll(int fsys, int flags)
 	fout = ((fref * mfd) / (BUSDIV * 4));
 #endif
 
+/* must not tamper with SDRAMC if running from SDRAM */
+#if !defined(CONFIG_MONITOR_IS_IN_RAM)
 	/*
 	 * Check to see if the SDRAM has already been initialized.
 	 * If it has then the SDRAM needs to be put into self refresh
@@ -254,6 +256,7 @@ int clock_pll(int fsys, int flags)
 
 	/* wait for DQS logic to relock */
 	for (i = 0; i < 0x200; i++) ;
+#endif /* !defined(CONFIG_MONITOR_IS_IN_RAM) */
 
 	return fout;
 }
diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S
index ff13a9f2dd..5b134aa47c 100644
--- a/cpu/mcf532x/start.S
+++ b/cpu/mcf532x/start.S
@@ -45,6 +45,7 @@
 	addl	#60,%sp;		/* space for 15 regs */ \
 	rte;
 
+#if !defined(CONFIG_MONITOR_IS_IN_RAM)
 .text
 /*
  *	Vector table. This is used for initial platform startup.
@@ -121,6 +122,7 @@ vector192_255:
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+#endif /* !defined(CONFIG_MONITOR_IS_IN_RAM) */
 
 	.text
 
@@ -130,9 +132,11 @@ _start:
 	nop
 	move.w #0x2700,%sr	/* Mask off Interrupt */
 
+#if !defined(CONFIG_MONITOR_IS_IN_RAM)
 	/* Set vector base register at the beginning of the Flash */
 	move.l	#CONFIG_SYS_FLASH_BASE, %d0
 	movec	%d0, %VBR
+#endif
 
 	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
 	movec	%d0, %RAMBAR1