From: Sumit Garg Date: Thu, 21 Mar 2024 14:55:02 +0000 (+0530) Subject: phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=c214ebce09bcea4b827344526f55d7bd300046c3;p=u-boot.git phy: phy-imx8m-pcie: Add support for i.MX8M{M/P} PCIe PHY Add initial support for i.MX8M{M/P} PCIe PHY. On i.MX8M{M/P} SoCs PCIe PHY initialization moved to this standalone PHY driver. Inspired from counterpart Linux kernel v6.8-rc3 driver: drivers/phy/freescale/phy-fsl-imx8m-pcie.c. Use last Linux kernel driver reference commit 7559e7572c03 ("phy: Explicitly include correct DT includes"). Tested-by: Tim Harvey #imx8mp-venice* Tested-by: Adam Ford #imx8mp-beacon-kit Reviewed-by: Marek Vasut Signed-off-by: Sumit Garg --- diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 60138beca4..8f767877e7 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -284,6 +284,17 @@ config PHY_IMX8MQ_USB help Support the USB3.0 PHY in NXP i.MX8MQ or i.MX8MP SoC +config PHY_IMX8M_PCIE + bool "NXP i.MX8MM/i.MX8MP PCIe PHY Driver" + depends on PHY + depends on IMX8MM || IMX8MP + select REGMAP + select SYSCON + help + Support the PCIe PHY in NXP i.MX8MM or i.MX8MP SoC + + This PHY is found on i.MX8M devices supporting PCIe. + config PHY_XILINX_ZYNQMP tristate "Xilinx ZynqMP PHY driver" depends on PHY && ARCH_ZYNQMP diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 2e8723186c..7a2b764492 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o obj-$(CONFIG_PHY_NPCM_USB) += phy-npcm-usb.o obj-$(CONFIG_PHY_IMX8MQ_USB) += phy-imx8mq-usb.o +obj-$(CONFIG_PHY_IMX8M_PCIE) += phy-imx8m-pcie.o obj-$(CONFIG_PHY_XILINX_ZYNQMP) += phy-zynqmp.o obj-y += cadence/ obj-y += ti/ diff --git a/drivers/phy/phy-imx8m-pcie.c b/drivers/phy/phy-imx8m-pcie.c new file mode 100644 index 0000000000..2418388cb3 --- /dev/null +++ b/drivers/phy/phy-imx8m-pcie.c @@ -0,0 +1,283 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2024 Linaro Ltd. + * + * Derived from Linux counterpart driver + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define IMX8MM_PCIE_PHY_CMN_REG061 0x184 +#define ANA_PLL_CLK_OUT_TO_EXT_IO_EN BIT(0) +#define IMX8MM_PCIE_PHY_CMN_REG062 0x188 +#define ANA_PLL_CLK_OUT_TO_EXT_IO_SEL BIT(3) +#define IMX8MM_PCIE_PHY_CMN_REG063 0x18C +#define AUX_PLL_REFCLK_SEL_SYS_PLL GENMASK(7, 6) +#define IMX8MM_PCIE_PHY_CMN_REG064 0x190 +#define ANA_AUX_RX_TX_SEL_TX BIT(7) +#define ANA_AUX_RX_TERM_GND_EN BIT(3) +#define ANA_AUX_TX_TERM BIT(2) +#define IMX8MM_PCIE_PHY_CMN_REG065 0x194 +#define ANA_AUX_RX_TERM (BIT(7) | BIT(4)) +#define ANA_AUX_TX_LVL GENMASK(3, 0) +#define IMX8MM_PCIE_PHY_CMN_REG075 0x1D4 +#define ANA_PLL_DONE 0x3 +#define PCIE_PHY_TRSV_REG5 0x414 +#define PCIE_PHY_TRSV_REG6 0x418 + +#define IMX8MM_GPR_PCIE_REF_CLK_SEL GENMASK(25, 24) +#define IMX8MM_GPR_PCIE_REF_CLK_PLL FIELD_PREP(IMX8MM_GPR_PCIE_REF_CLK_SEL, 0x3) +#define IMX8MM_GPR_PCIE_REF_CLK_EXT FIELD_PREP(IMX8MM_GPR_PCIE_REF_CLK_SEL, 0x2) +#define IMX8MM_GPR_PCIE_AUX_EN BIT(19) +#define IMX8MM_GPR_PCIE_CMN_RST BIT(18) +#define IMX8MM_GPR_PCIE_POWER_OFF BIT(17) +#define IMX8MM_GPR_PCIE_SSC_EN BIT(16) +#define IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE BIT(9) + +#define IOMUXC_GPR14_OFFSET 0x38 + +enum imx8_pcie_phy_type { + IMX8MM, + IMX8MP, +}; + +struct imx8_pcie_phy_drvdata { + const char *gpr; + enum imx8_pcie_phy_type variant; +}; + +struct imx8_pcie_phy { + ulong base; + struct clk hsio_clk; + struct regmap *iomuxc_gpr; + struct reset_ctl perst; + struct reset_ctl reset; + u32 refclk_pad_mode; + u32 tx_deemph_gen1; + u32 tx_deemph_gen2; + bool clkreq_unused; + const struct imx8_pcie_phy_drvdata *drvdata; +}; + +static int imx8_pcie_phy_power_on(struct phy *phy) +{ + int ret; + u32 val, pad_mode; + struct imx8_pcie_phy *imx8_phy = dev_get_priv(phy->dev); + + pad_mode = imx8_phy->refclk_pad_mode; + switch (imx8_phy->drvdata->variant) { + case IMX8MM: + reset_assert(&imx8_phy->reset); + + /* Tune PHY de-emphasis setting to pass PCIe compliance. */ + if (imx8_phy->tx_deemph_gen1) + writel(imx8_phy->tx_deemph_gen1, + imx8_phy->base + PCIE_PHY_TRSV_REG5); + if (imx8_phy->tx_deemph_gen2) + writel(imx8_phy->tx_deemph_gen2, + imx8_phy->base + PCIE_PHY_TRSV_REG6); + break; + case IMX8MP: /* Do nothing. */ + break; + } + + if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT || + pad_mode == IMX8_PCIE_REFCLK_PAD_UNUSED) { + /* Configure the pad as input */ + val = readl(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG061); + writel(val & ~ANA_PLL_CLK_OUT_TO_EXT_IO_EN, + imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG061); + } else { + /* Configure the PHY to output the refclock via pad */ + writel(ANA_PLL_CLK_OUT_TO_EXT_IO_EN, + imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG061); + } + + if (pad_mode == IMX8_PCIE_REFCLK_PAD_OUTPUT || + pad_mode == IMX8_PCIE_REFCLK_PAD_UNUSED) { + /* Source clock from SoC internal PLL */ + writel(ANA_PLL_CLK_OUT_TO_EXT_IO_SEL, + imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG062); + writel(AUX_PLL_REFCLK_SEL_SYS_PLL, + imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG063); + val = ANA_AUX_RX_TX_SEL_TX | ANA_AUX_TX_TERM; + writel(val | ANA_AUX_RX_TERM_GND_EN, + imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG064); + writel(ANA_AUX_RX_TERM | ANA_AUX_TX_LVL, + imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG065); + } + + /* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */ + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14_OFFSET, + IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE, + imx8_phy->clkreq_unused ? + 0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE); + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14_OFFSET, + IMX8MM_GPR_PCIE_AUX_EN, + IMX8MM_GPR_PCIE_AUX_EN); + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14_OFFSET, + IMX8MM_GPR_PCIE_POWER_OFF, 0); + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14_OFFSET, + IMX8MM_GPR_PCIE_SSC_EN, 0); + + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14_OFFSET, + IMX8MM_GPR_PCIE_REF_CLK_SEL, + pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ? + IMX8MM_GPR_PCIE_REF_CLK_EXT : + IMX8MM_GPR_PCIE_REF_CLK_PLL); + udelay(200); + + /* Do the PHY common block reset */ + regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14_OFFSET, + IMX8MM_GPR_PCIE_CMN_RST, + IMX8MM_GPR_PCIE_CMN_RST); + + switch (imx8_phy->drvdata->variant) { + case IMX8MP: + reset_deassert(&imx8_phy->perst); + fallthrough; + case IMX8MM: + reset_deassert(&imx8_phy->reset); + udelay(500); + break; + } + + /* Polling to check the phy is ready or not. */ + ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG075, + val, val == ANA_PLL_DONE, 20000); + return ret; +} + +static int imx8_pcie_phy_init(struct phy *phy) +{ + struct imx8_pcie_phy *imx8_phy = dev_get_priv(phy->dev); + + return clk_enable(&imx8_phy->hsio_clk); +} + +static int imx8_pcie_phy_exit(struct phy *phy) +{ + struct imx8_pcie_phy *imx8_phy = dev_get_priv(phy->dev); + + return clk_disable(&imx8_phy->hsio_clk); +} + +static const struct phy_ops imx8_pcie_phy_ops = { + .init = imx8_pcie_phy_init, + .exit = imx8_pcie_phy_exit, + .power_on = imx8_pcie_phy_power_on, +}; + +static const struct imx8_pcie_phy_drvdata imx8mm_drvdata = { + .gpr = "fsl,imx8mm-iomuxc-gpr", + .variant = IMX8MM, +}; + +static const struct imx8_pcie_phy_drvdata imx8mp_drvdata = { + .gpr = "fsl,imx8mp-iomuxc-gpr", + .variant = IMX8MP, +}; + +static const struct udevice_id imx8_pcie_phy_of_match[] = { + {.compatible = "fsl,imx8mm-pcie-phy", .data = (ulong)&imx8mm_drvdata, }, + {.compatible = "fsl,imx8mp-pcie-phy", .data = (ulong)&imx8mp_drvdata, }, + { }, +}; + +static int imx8_pcie_phy_probe(struct udevice *dev) +{ + struct imx8_pcie_phy *imx8_phy = dev_get_priv(dev); + ofnode gpr; + int ret = 0; + + imx8_phy->drvdata = (void *)dev_get_driver_data(dev); + imx8_phy->base = dev_read_addr(dev); + if (!imx8_phy->base) + return -EINVAL; + + /* get PHY refclk pad mode */ + dev_read_u32(dev, "fsl,refclk-pad-mode", &imx8_phy->refclk_pad_mode); + + imx8_phy->tx_deemph_gen1 = dev_read_u32_default(dev, + "fsl,tx-deemph-gen1", + 0); + imx8_phy->tx_deemph_gen2 = dev_read_u32_default(dev, + "fsl,tx-deemph-gen2", + 0); + imx8_phy->clkreq_unused = dev_read_bool(dev, "fsl,clkreq-unsupported"); + + /* Grab GPR config register range */ + gpr = ofnode_by_compatible(ofnode_null(), imx8_phy->drvdata->gpr); + if (ofnode_equal(gpr, ofnode_null())) { + dev_err(dev, "unable to find GPR node\n"); + return -ENODEV; + } + + imx8_phy->iomuxc_gpr = syscon_node_to_regmap(gpr); + if (IS_ERR(imx8_phy->iomuxc_gpr)) { + dev_err(dev, "unable to find iomuxc registers\n"); + return PTR_ERR(imx8_phy->iomuxc_gpr); + } + + ret = clk_get_by_name(dev, "ref", &imx8_phy->hsio_clk); + if (ret) { + dev_err(dev, "Failed to get PCIEPHY ref clock\n"); + return ret; + } + + ret = reset_get_by_name(dev, "pciephy", &imx8_phy->reset); + if (ret) { + dev_err(dev, "Failed to get PCIEPHY reset control\n"); + return ret; + } + + if (imx8_phy->drvdata->variant == IMX8MP) { + ret = reset_get_by_name(dev, "perst", &imx8_phy->perst); + if (ret) { + dev_err(dev, + "Failed to get PCIEPHY PHY PERST control\n"); + goto err_perst; + } + } + + return 0; + +err_perst: + reset_free(&imx8_phy->reset); + return ret; +} + +static int imx8_pcie_phy_remove(struct udevice *dev) +{ + struct imx8_pcie_phy *imx8_phy = dev_get_priv(dev); + + if (imx8_phy->drvdata->variant == IMX8MP) + reset_free(&imx8_phy->perst); + + reset_free(&imx8_phy->reset); + + return 0; +} + +U_BOOT_DRIVER(nxp_imx8_pcie_phy) = { + .name = "nxp_imx8_pcie_phy", + .id = UCLASS_PHY, + .of_match = imx8_pcie_phy_of_match, + .probe = imx8_pcie_phy_probe, + .remove = imx8_pcie_phy_remove, + .ops = &imx8_pcie_phy_ops, + .priv_auto = sizeof(struct imx8_pcie_phy), +};