From: Marek Behún Date: Fri, 26 Nov 2021 13:57:11 +0000 (+0100) Subject: arm: mvebu: turris_mox: Find DT nodes by compatible or alias instead of path X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=bcf6971d536793eb99e12ff857cc018963d7cd46;p=u-boot.git arm: mvebu: turris_mox: Find DT nodes by compatible or alias instead of path It is better to find DT nodes by compatible strings or aliases instead of path. There were issues with Linux some DTBs having different names of some nodes, e.g. internal-regs instead of internal-regs@d0000000 This should be a generic fix for such issues. Also since fdt_support now contains needed functions, we can drop our own implementations. Signed-off-by: Marek Behún Reviewed-by: Stefan Roese --- diff --git a/board/CZ.NIC/turris_mox/turris_mox.c b/board/CZ.NIC/turris_mox/turris_mox.c index 2202eb8cfb..03c923969e 100644 --- a/board/CZ.NIC/turris_mox/turris_mox.c +++ b/board/CZ.NIC/turris_mox/turris_mox.c @@ -41,22 +41,14 @@ #define ARMADA_37XX_SPI_DOUT (MVEBU_REGISTER(0x10608)) #define ARMADA_37XX_SPI_DIN (MVEBU_REGISTER(0x1060c)) -#define ETH1_PATH "/soc/internal-regs@d0000000/ethernet@40000" -#define MDIO_PATH "/soc/internal-regs@d0000000/mdio@32004" -#define SFP_GPIO_PATH "/soc/internal-regs@d0000000/spi@10600/moxtet@1/gpio@0" -#define PCIE_PATH "/soc/pcie@d0070000" -#define SFP_PATH "/sfp" -#define LED_PATH "/leds/led" -#define BUTTON_PATH "/gpio-keys/reset" - DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_OF_BOARD_FIXUP) int board_fix_fdt(void *blob) { u8 topology[MAX_MOX_MODULES]; - int i, size, node; - bool enable; + enum fdt_status status; + int i, size, ret; /* * SPI driver is not loaded in driver model yet, but we have to find out @@ -94,21 +86,15 @@ int board_fix_fdt(void *blob) if (size > 1 && (topology[1] == MOX_MODULE_PCI || topology[1] == MOX_MODULE_USB3 || topology[1] == MOX_MODULE_PASSPCI)) - enable = true; + status = FDT_STATUS_OKAY; else - enable = false; - - node = fdt_path_offset(blob, PCIE_PATH); + status = FDT_STATUS_DISABLED; - if (node < 0) { - printf("Cannot find PCIe node in U-Boot's device tree!\n"); - return 0; - } - - if (fdt_setprop_string(blob, node, "status", - enable ? "okay" : "disabled") < 0) { - printf("Cannot %s PCIe in U-Boot's device tree!\n", - enable ? "enable" : "disable"); + ret = fdt_set_status_by_compatible(blob, "marvell,armada-3700-pcie", + status); + if (ret < 0) { + printf("Cannot set status for PCIe in U-Boot's device tree: %s!\n", + fdt_strerror(ret)); return 0; } @@ -416,12 +402,18 @@ static bool read_reset_button(void) struct udevice *button, *led; int i; - if (device_get_global_by_ofnode(ofnode_path(BUTTON_PATH), &button)) { + if (device_get_global_by_ofnode( + ofnode_first_subnode(ofnode_by_compatible(ofnode_null(), + "gpio-keys")), + &button)) { printf("Cannot find reset button!\n"); return false; } - if (device_get_global_by_ofnode(ofnode_path(LED_PATH), &led)) { + if (device_get_global_by_ofnode( + ofnode_first_subnode(ofnode_by_compatible(ofnode_null(), + "gpio-leds")), + &led)) { printf("Cannot find status LED!\n"); return false; } @@ -664,92 +656,34 @@ handle_reset_btn: #if defined(CONFIG_OF_BOARD_SETUP) -static int vnode_by_path(void *blob, const char *fmt, va_list ap) +static bool is_topaz(int id) { - char path[128]; - - vsnprintf(path, 128, fmt, ap); - return fdt_path_offset(blob, path); + return topaz && id == peridot + topaz - 1; } -static int node_by_path(void *blob, const char *fmt, ...) +static int switch_addr(int id) { - va_list ap; - int res; - - va_start(ap, fmt); - res = vnode_by_path(blob, fmt, ap); - va_end(ap); - - return res; + return is_topaz(id) ? 0x2 : 0x10 + id; } -static int phandle_by_path(void *blob, const char *fmt, ...) +static int setup_switch(void *blob, int id) { - va_list ap; - int node, phandle, res; - - va_start(ap, fmt); - node = vnode_by_path(blob, fmt, ap); - va_end(ap); + int res, addr, i, node; + char mdio_path[64]; + node = fdt_node_offset_by_compatible(blob, -1, "marvell,orion-mdio"); if (node < 0) return node; - phandle = fdt_get_phandle(blob, node); - if (phandle > 0) - return phandle; - - phandle = fdt_get_max_phandle(blob); - if (phandle < 0) - return phandle; - - phandle += 1; - - res = fdt_setprop_u32(blob, node, "linux,phandle", phandle); + res = fdt_get_path(blob, node, mdio_path, sizeof(mdio_path)); if (res < 0) return res; - res = fdt_setprop_u32(blob, node, "phandle", phandle); - if (res < 0) - return res; - - return phandle; -} - -static int enable_by_path(void *blob, const char *fmt, ...) -{ - va_list ap; - int node; - - va_start(ap, fmt); - node = vnode_by_path(blob, fmt, ap); - va_end(ap); - - if (node < 0) - return node; - - return fdt_setprop_string(blob, node, "status", "okay"); -} - -static bool is_topaz(int id) -{ - return topaz && id == peridot + topaz - 1; -} - -static int switch_addr(int id) -{ - return is_topaz(id) ? 0x2 : 0x10 + id; -} - -static int setup_switch(void *blob, int id) -{ - int res, addr, i, node, phandle; - addr = switch_addr(id); /* first enable the switch by setting status = "okay" */ - res = enable_by_path(blob, MDIO_PATH "/switch%i@%x", id, addr); + res = fdt_status_okay_by_pathf(blob, "%s/switch%i@%x", mdio_path, id, + addr); if (res < 0) return res; @@ -758,13 +692,13 @@ static int setup_switch(void *blob, int id) * enable corresponding ports */ if (id < peridot + topaz - 1) { - res = enable_by_path(blob, - MDIO_PATH "/switch%i@%x/ports/port@a", - id, addr); + res = fdt_status_okay_by_pathf(blob, + "%s/switch%i@%x/ports/port@a", + mdio_path, id, addr); } else if (id == peridot - 1 && !topaz && sfp) { - res = enable_by_path(blob, - MDIO_PATH "/switch%i@%x/ports/port-sfp@a", - id, addr); + res = fdt_status_okay_by_pathf(blob, + "%s/switch%i@%x/ports/port-sfp@a", + mdio_path, id, addr); } else { res = 0; } @@ -775,18 +709,21 @@ static int setup_switch(void *blob, int id) return 0; /* finally change link property if needed */ - node = node_by_path(blob, MDIO_PATH "/switch%i@%x/ports/port@a", id, - addr); + node = fdt_node_offset_by_pathf(blob, "%s/switch%i@%x/ports/port@a", + mdio_path, id, addr); if (node < 0) return node; for (i = id + 1; i < peridot + topaz; ++i) { - phandle = phandle_by_path(blob, - MDIO_PATH "/switch%i@%x/ports/port@%x", - i, switch_addr(i), - is_topaz(i) ? 5 : 9); - if (phandle < 0) - return phandle; + unsigned int phandle; + + phandle = fdt_create_phandle_by_pathf(blob, + "%s/switch%i@%x/ports/port@%x", + mdio_path, i, + switch_addr(i), + is_topaz(i) ? 5 : 9); + if (!phandle) + return -FDT_ERR_NOPHANDLES; if (i == id + 1) res = fdt_setprop_u32(blob, node, "link", phandle); @@ -819,18 +756,15 @@ static int remove_disabled_nodes(void *blob) int ft_board_setup(void *blob, struct bd_info *bd) { - int node, phandle, res; + int res; /* * If MOX B (PCI), MOX F (USB) or MOX G (Passthrough PCI) modules are * connected, enable the PCIe node. */ if (pci || usb || passpci) { - node = fdt_path_offset(blob, PCIE_PATH); - if (node < 0) - return node; - - res = fdt_setprop_string(blob, node, "status", "okay"); + res = fdt_status_okay_by_compatible(blob, + "marvell,armada-3700-pcie"); if (res < 0) return res; @@ -847,7 +781,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) if (peridot || topaz) { int i; - res = enable_by_path(blob, ETH1_PATH); + res = fdt_status_okay_by_alias(blob, "ethernet1"); if (res < 0) return res; @@ -865,20 +799,25 @@ int ft_board_setup(void *blob, struct bd_info *bd) * Also enable and configure SFP GPIO controller node. */ if (sfp) { - res = enable_by_path(blob, SFP_PATH); + int node; + + res = fdt_status_okay_by_compatible(blob, "sff,sfp"); if (res < 0) return res; - res = enable_by_path(blob, ETH1_PATH); + res = fdt_status_okay_by_alias(blob, "ethernet1"); if (res < 0) return res; if (!peridot) { - phandle = phandle_by_path(blob, SFP_PATH); - if (phandle < 0) - return res; + unsigned int phandle; + + phandle = fdt_create_phandle_by_compatible(blob, + "sff,sfp"); + if (!phandle) + return -FDT_ERR_NOPHANDLES; - node = node_by_path(blob, ETH1_PATH); + node = fdt_path_offset(blob, "ethernet1"); if (node < 0) return node; @@ -892,7 +831,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) return res; } - res = enable_by_path(blob, SFP_GPIO_PATH); + res = fdt_status_okay_by_compatible(blob, "cznic,moxtet-gpio"); if (res < 0) return res; @@ -900,7 +839,8 @@ int ft_board_setup(void *blob, struct bd_info *bd) char newname[16]; /* moxtet-sfp is on non-zero position, change default */ - node = node_by_path(blob, SFP_GPIO_PATH); + node = fdt_node_offset_by_compatible(blob, -1, + "cznic,moxtet-gpio"); if (node < 0) return node;