From: Andre Przywara Date: Tue, 30 Jan 2024 14:16:42 +0000 (+0000) Subject: sunxi: H616: Add OrangePi Zero 2W board support X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=bc6e594104caaa25b3b2b53ea1db3df69623dc61;p=u-boot.git sunxi: H616: Add OrangePi Zero 2W board support The OrangePi Zero 2W is a tiny development board featuring the Allwinner H618 SoC, shipping with up to 4GB of LPDDR4 DRAM, a mini-HDMI connector, two USB Type-C sockets and a 16MB SPI NOR flash. There is an FPC connector to connect an expansion board, which sports two more USB Type-A sockets and a 100MBit Ethernet port. Support for the expansion board is not in the DT yet, probably a DT overlay would cover this in the future. Add a defconfig file selecting the right drivers and DRAM options. Since the .dts file was synced from the Linux kernel repo already, we just need to add one line to the Makefile to actually build the .dtb. The DRAM parameters were derived from the values found in the BSP DRAM drivers on the SPI NOR flash. Signed-off-by: Andre Przywara Reviewed-by: Jernej Skrabec --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index d9725030d5..b102ffb5f6 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -839,6 +839,7 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \ sun50i-h6-tanix-tx6-mini.dtb dtb-$(CONFIG_MACH_SUN50I_H616) += \ sun50i-h616-orangepi-zero2.dtb \ + sun50i-h618-orangepi-zero2w.dtb \ sun50i-h618-orangepi-zero3.dtb \ sun50i-h618-transpeed-8k618-t.dtb \ sun50i-h616-x96-mate.dtb diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index a2da6a4a7a..4bcd9b9af7 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -460,6 +460,11 @@ M: Jernej Skrabec S: Maintained F: configs/orangepi_zero2_defconfig +ORANGEPI ZERO 2W BOARD +M: Andre Przywara +S: Maintained +F: configs/orangepi_zero2w_defconfig + ORANGEPI ZERO 3 BOARD M: Andre Przywara S: Maintained diff --git a/configs/orangepi_zero2w_defconfig b/configs/orangepi_zero2w_defconfig new file mode 100644 index 0000000000..5734d9d839 --- /dev/null +++ b/configs/orangepi_zero2w_defconfig @@ -0,0 +1,30 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h618-orangepi-zero2w" +CONFIG_SPL=y +CONFIG_DRAM_SUN50I_H616_DX_ODT=0x07070707 +CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e +CONFIG_DRAM_SUN50I_H616_CA_DRI=0x0e0e +CONFIG_DRAM_SUN50I_H616_ODT_EN=0xaaaaeeee +CONFIG_DRAM_SUN50I_H616_TPR6=0x48808080 +CONFIG_DRAM_SUN50I_H616_TPR10=0x402f6663 +CONFIG_DRAM_SUN50I_H616_TPR11=0x26262524 +CONFIG_DRAM_SUN50I_H616_TPR12=0x100f100f +CONFIG_MACH_SUN50I_H616=y +CONFIG_SUNXI_DRAM_H616_LPDDR4=y +CONFIG_DRAM_CLK=792 +CONFIG_R_I2C_ENABLE=y +CONFIG_SPL_SPI_SUNXI=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_I2C=y +CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_SYS_I2C_SLAVE=0x7f +CONFIG_SYS_I2C_SPEED=400000 +CONFIG_MTD=y +CONFIG_SPI_FLASH_ZBIT=y +CONFIG_AXP313_POWER=y +CONFIG_SPI=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_MUSB_GADGET=y