From: Xie Xiaobo <r63061@freescale.com>
Date: Mon, 3 Oct 2011 19:18:39 +0000 (-0700)
Subject: powerpc/mpc8536ds: Add eSPI support for MPC8536DS
X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=ae2044d8b30bf82fef5550497a0d4315edf6b62e;p=u-boot.git

powerpc/mpc8536ds: Add eSPI support for MPC8536DS

1. The SD_DATA[4:7] signals are shared with the SPI chip selects on 8536DS,
   so don't set MPC85xx_PMUXCR_SD_DATA that config eSDHC data bus-width
   to 4-bit and enable SPI signals.
2. Add eSPI controller and SPI-FLASH definition.

Signed-off-by: Xie Xiaobo <r63061@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---

diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index fb5ef916cc..a29fe35cd3 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1934,7 +1934,12 @@ typedef struct ccsr_gur {
 	u8	res1[8];
 	u32	gpporcr;	/* General-purpose POR configuration */
 	u8	res2[12];
+#if defined(CONFIG_MPC8536)
+	u32	gencfgr;	/* General Configuration Register */
+#define MPC85xx_GENCFGR_SDHC_WP_INV	0x20000000
+#else
 	u32	gpiocr;		/* GPIO control */
+#endif
 	u8	res3[12];
 #if defined(CONFIG_MPC8569)
 	u32	plppar1;	/* Platform port pin assignment 1 */
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index b292e13541..2beea345c5 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ * Copyright 2008-2010, 2011 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -49,10 +49,8 @@ int board_early_init_f (void)
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 
 	setbits_be32(&gur->pmuxcr,
-			(MPC85xx_PMUXCR_SD_DATA |
-			 MPC85xx_PMUXCR_SDHC_CD |
+			(MPC85xx_PMUXCR_SDHC_CD |
 			 MPC85xx_PMUXCR_SDHC_WP));
-
 #endif
 	return 0;
 }
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 3efe9373fd..36e25f6224 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -77,6 +77,7 @@
 #define CONFIG_MPC8536DS	1
 
 #define CONFIG_FSL_ELBC		1	/* Has Enhanced localbus controller */
+#define CONFIG_SPI_FLASH	1	/* Has SPI Flash */
 #define CONFIG_PCI		1	/* Enable PCI/PCIE */
 #define CONFIG_PCI1		1	/* Enable PCI controller 1 */
 #define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
@@ -457,6 +458,19 @@
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
 #define CONFIG_SYS_EEPROM_BUS_NUM	1
 
+/*
+ * eSPI - Enhanced SPI
+ */
+#define CONFIG_HARD_SPI
+#define CONFIG_FSL_ESPI
+
+#if defined(CONFIG_SPI_FLASH)
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_CMD_SF
+#define CONFIG_SF_DEFAULT_SPEED	10000000
+#define CONFIG_SF_DEFAULT_MODE	0
+#endif
+
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.