From: Amar Date: Sat, 27 Apr 2013 06:12:54 +0000 (+0530) Subject: DWMMC: Initialise dwmci and resolve EMMC read write issues X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=9c50e35ff2f8ead8df5781988927b51ea03c6192;p=u-boot.git DWMMC: Initialise dwmci and resolve EMMC read write issues This patch enumerates dwmci and set auto stop command during dwmci initialisation. EMMC read/write is not happening in current implementation due to improper fifo size computation. Hence modified the fifo size computation to resolve EMMC read write issues. Signed-off-by: Amar Acked-by: Jaehoon Chung Signed-off-by: Minkyu Kang --- diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c index 4070d4ea53..1307b121d1 100644 --- a/drivers/mmc/dw_mmc.c +++ b/drivers/mmc/dw_mmc.c @@ -129,13 +129,13 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, unsigned int timeout = 100000; u32 retry = 10000; u32 mask, ctrl; + ulong start = get_timer(0); while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) { - if (timeout == 0) { + if (get_timer(start) > timeout) { printf("Timeout on data busy\n"); return TIMEOUT; } - timeout--; } dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL); @@ -143,7 +143,6 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, if (data) dwmci_prepare_data(host, data); - dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg); if (data) @@ -231,9 +230,8 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq) int timeout = 10000; unsigned long sclk; - if (freq == host->clock) + if ((freq == host->clock) || (freq == 0)) return 0; - /* * If host->mmc_clk didn't define, * then assume that host->bus_hz is source clock value. @@ -323,6 +321,9 @@ static int dwmci_init(struct mmc *mmc) return -1; } + /* Enumerate at 400KHz */ + dwmci_setup_bus(host, mmc->f_min); + dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF); dwmci_writel(host, DWMCI_INTMASK, 0); @@ -332,11 +333,13 @@ static int dwmci_init(struct mmc *mmc) dwmci_writel(host, DWMCI_BMOD, 1); fifo_size = dwmci_readl(host, DWMCI_FIFOTH); - if (host->fifoth_val) + fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1; + if (host->fifoth_val) { fifoth_val = host->fifoth_val; - else - fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 -1) | - TX_WMARK(fifo_size/2); + } else { + fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) | + TX_WMARK(fifo_size / 2); + } dwmci_writel(host, DWMCI_FIFOTH, fifoth_val); dwmci_writel(host, DWMCI_CLKENA, 0);