From: Tom Rini Date: Thu, 31 Mar 2022 17:46:49 +0000 (-0400) Subject: net: Remove lan91c96 driver X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=9bd2ab4b396e353eaf4dfd234461297fdf4b9c21;p=u-boot.git net: Remove lan91c96 driver This driver is not enabled by any board and not converted to DM_ETH. Remove. Signed-off-by: Tom Rini --- diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 4c4fe9b0b3..be3264e041 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -47,7 +47,6 @@ obj-$(CONFIG_GMAC_ROCKCHIP) += gmac_rockchip.o obj-$(CONFIG_HIGMACV300_ETH) += higmacv300.o obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o obj-$(CONFIG_KSZ9477) += ksz9477.o -obj-$(CONFIG_LAN91C96) += lan91c96.o obj-$(CONFIG_LPC32XX_ETH) += lpc32xx_eth.o obj-$(CONFIG_MACB) += macb.o obj-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c deleted file mode 100644 index c2f611144d..0000000000 --- a/drivers/net/lan91c96.c +++ /dev/null @@ -1,799 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/*------------------------------------------------------------------------ - * lan91c96.c - * This is a driver for SMSC's LAN91C96 single-chip Ethernet device, based - * on the SMC91111 driver from U-Boot. - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Rolf Offermanns - * - * Copyright (C) 2001 Standard Microsystems Corporation (SMSC) - * Developed by Simple Network Magic Corporation (SNMC) - * Copyright (C) 1996 by Erik Stahlman (ES) - * - * Information contained in this file was obtained from the LAN91C96 - * manual from SMC. To get a copy, if you really want one, you can find - * information under www.smsc.com. - * - * "Features" of the SMC chip: - * 6144 byte packet memory. ( for the 91C96 ) - * EEPROM for configuration - * AUI/TP selection ( mine has 10Base2/10BaseT select ) - * - * Arguments: - * io = for the base address - * irq = for the IRQ - * - * author: - * Erik Stahlman ( erik@vt.edu ) - * Daris A Nevil ( dnevil@snmc.com ) - * - * - * Hardware multicast code from Peter Cammaert ( pc@denkart.be ) - * - * Sources: - * o SMSC LAN91C96 databook (www.smsc.com) - * o smc91111.c (u-boot driver) - * o smc9194.c (linux kernel driver) - * o lan91c96.c (Intel Diagnostic Manager driver) - * - * History: - * 04/30/03 Mathijs Haarman Modified smc91111.c (u-boot version) - * for lan91c96 - *--------------------------------------------------------------------------- - */ - -#include -#include -#include -#include -#include -#include "lan91c96.h" -#include -#include - -/*------------------------------------------------------------------------ - * - * Configuration options, for the experienced user to change. - * - -------------------------------------------------------------------------*/ - -/* Use power-down feature of the chip */ -#define POWER_DOWN 0 - -/* - * Wait time for memory to be free. This probably shouldn't be - * tuned that much, as waiting for this means nothing else happens - * in the system -*/ -#define MEMORY_WAIT_TIME 16 - -#define SMC_DEBUG 0 - -#if (SMC_DEBUG > 2 ) -#define PRINTK3(args...) printf(args) -#else -#define PRINTK3(args...) -#endif - -#if SMC_DEBUG > 1 -#define PRINTK2(args...) printf(args) -#else -#define PRINTK2(args...) -#endif - -#ifdef SMC_DEBUG -#define PRINTK(args...) printf(args) -#else -#define PRINTK(args...) -#endif - - -/*------------------------------------------------------------------------ - * - * The internal workings of the driver. If you are changing anything - * here with the SMC stuff, you should have the datasheet and know - * what you are doing. - * - *------------------------------------------------------------------------ - */ -#define DRIVER_NAME "LAN91C96" -#define SMC_ALLOC_MAX_TRY 5 -#define SMC_TX_TIMEOUT 30 - -#define ETH_ZLEN 60 - -#ifdef CONFIG_LAN91C96_USE_32_BIT -#define USE_32_BIT 1 -#else -#undef USE_32_BIT -#endif - -/* See if a MAC address is defined in the current environment. If so use it. If not - . print a warning and set the environment and other globals with the default. - . If an EEPROM is present it really should be consulted. -*/ -static int smc_get_ethaddr(struct bd_info *bd, struct eth_device *dev); -static int get_rom_mac(struct eth_device *dev, unsigned char *v_rom_mac); - -/* ------------------------------------------------------------ - * Internal routines - * ------------------------------------------------------------ - */ - -static unsigned char smc_mac_addr[] = { 0xc0, 0x00, 0x00, 0x1b, 0x62, 0x9c }; - -/* - * This function must be called before smc_open() if you want to override - * the default mac address. - */ - -static void smc_set_mac_addr(const unsigned char *addr) -{ - int i; - - for (i = 0; i < sizeof (smc_mac_addr); i++) { - smc_mac_addr[i] = addr[i]; - } -} - -/*********************************************** - * Show available memory * - ***********************************************/ -void dump_memory_info(struct eth_device *dev) -{ - __maybe_unused word mem_info; - word old_bank; - - old_bank = SMC_inw(dev, LAN91C96_BANK_SELECT) & 0xF; - - SMC_SELECT_BANK(dev, 0); - mem_info = SMC_inw(dev, LAN91C96_MIR); - PRINTK2 ("Memory: %4d available\n", (mem_info >> 8) * 2048); - - SMC_SELECT_BANK(dev, old_bank); -} - -/* - * A rather simple routine to print out a packet for debugging purposes. - */ -#if SMC_DEBUG > 2 -static void print_packet (byte *, int); -#endif - -static int poll4int (struct eth_device *dev, byte mask, int timeout) -{ - int tmo = get_timer (0) + timeout * CONFIG_SYS_HZ; - int is_timeout = 0; - word old_bank = SMC_inw(dev, LAN91C96_BANK_SELECT); - - PRINTK2 ("Polling...\n"); - SMC_SELECT_BANK(dev, 2); - while ((SMC_inw(dev, LAN91C96_INT_STATS) & mask) == 0) { - if (get_timer (0) >= tmo) { - is_timeout = 1; - break; - } - } - - /* restore old bank selection */ - SMC_SELECT_BANK(dev, old_bank); - - if (is_timeout) - return 1; - else - return 0; -} - -/* - * Function: smc_reset - * Purpose: - * This sets the SMC91111 chip to its normal state, hopefully from whatever - * mess that any other DOS driver has put it in. - * - * Maybe I should reset more registers to defaults in here? SOFTRST should - * do that for me. - * - * Method: - * 1. send a SOFT RESET - * 2. wait for it to finish - * 3. enable autorelease mode - * 4. reset the memory management unit - * 5. clear all interrupts - * -*/ -static void smc_reset(struct eth_device *dev) -{ - PRINTK2("%s:smc_reset\n", dev->name); - - /* This resets the registers mostly to defaults, but doesn't - affect EEPROM. That seems unnecessary */ - SMC_SELECT_BANK(dev, 0); - SMC_outw(dev, LAN91C96_RCR_SOFT_RST, LAN91C96_RCR); - - udelay(10); - - /* Disable transmit and receive functionality */ - SMC_outw(dev, 0, LAN91C96_RCR); - SMC_outw(dev, 0, LAN91C96_TCR); - - /* set the control register */ - SMC_SELECT_BANK(dev, 1); - SMC_outw(dev, SMC_inw(dev, LAN91C96_CONTROL) | LAN91C96_CTR_BIT_8, - LAN91C96_CONTROL); - - /* Disable all interrupts */ - SMC_outb(dev, 0, LAN91C96_INT_MASK); -} - -/* - * Function: smc_enable - * Purpose: let the chip talk to the outside work - * Method: - * 1. Initialize the Memory Configuration Register - * 2. Enable the transmitter - * 3. Enable the receiver -*/ -static void smc_enable(struct eth_device *dev) -{ - PRINTK2("%s:smc_enable\n", dev->name); - SMC_SELECT_BANK(dev, 0); - - /* Initialize the Memory Configuration Register. See page - 49 of the LAN91C96 data sheet for details. */ - SMC_outw(dev, LAN91C96_MCR_TRANSMIT_PAGES, LAN91C96_MCR); - - /* Initialize the Transmit Control Register */ - SMC_outw(dev, LAN91C96_TCR_TXENA, LAN91C96_TCR); - /* Initialize the Receive Control Register - * FIXME: - * The promiscuous bit set because I could not receive ARP reply - * packets from the server when I send a ARP request. It only works - * when I set the promiscuous bit - */ - SMC_outw(dev, LAN91C96_RCR_RXEN | LAN91C96_RCR_PRMS, LAN91C96_RCR); -} - -/* - * Function: smc_shutdown - * Purpose: closes down the SMC91xxx chip. - * Method: - * 1. zero the interrupt mask - * 2. clear the enable receive flag - * 3. clear the enable xmit flags - * - * TODO: - * (1) maybe utilize power down mode. - * Why not yet? Because while the chip will go into power down mode, - * the manual says that it will wake up in response to any I/O requests - * in the register space. Empirical results do not show this working. - */ -static void smc_shutdown(struct eth_device *dev) -{ - PRINTK2("%s:smc_shutdown\n", dev->name); - - /* no more interrupts for me */ - SMC_SELECT_BANK(dev, 2); - SMC_outb(dev, 0, LAN91C96_INT_MASK); - - /* and tell the card to stay away from that nasty outside world */ - SMC_SELECT_BANK(dev, 0); - SMC_outb(dev, 0, LAN91C96_RCR); - SMC_outb(dev, 0, LAN91C96_TCR); -} - - -/* - * Function: smc_hardware_send_packet(struct net_device * ) - * Purpose: - * This sends the actual packet to the SMC9xxx chip. - * - * Algorithm: - * First, see if a saved_skb is available. - * ( this should NOT be called if there is no 'saved_skb' - * Now, find the packet number that the chip allocated - * Point the data pointers at it in memory - * Set the length word in the chip's memory - * Dump the packet to chip memory - * Check if a last byte is needed ( odd length packet ) - * if so, set the control flag right - * Tell the card to send it - * Enable the transmit interrupt, so I know if it failed - * Free the kernel data if I actually sent it. - */ -static int smc_send_packet(struct eth_device *dev, void *packet, - int packet_length) -{ - byte packet_no; - byte *buf; - int length; - int numPages; - int try = 0; - int time_out; - byte status; - - - PRINTK3("%s:smc_hardware_send_packet\n", dev->name); - - length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN; - - /* allocate memory - ** The MMU wants the number of pages to be the number of 256 bytes - ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) ) - ** - ** The 91C111 ignores the size bits, but the code is left intact - ** for backwards and future compatibility. - ** - ** Pkt size for allocating is data length +6 (for additional status - ** words, length and ctl!) - ** - ** If odd size then last byte is included in this header. - */ - numPages = ((length & 0xfffe) + 6); - numPages >>= 8; /* Divide by 256 */ - - if (numPages > 7) { - printf("%s: Far too big packet error. \n", dev->name); - return 0; - } - - /* now, try to allocate the memory */ - - SMC_SELECT_BANK(dev, 2); - SMC_outw(dev, LAN91C96_MMUCR_ALLOC_TX | numPages, LAN91C96_MMU); - - again: - try++; - time_out = MEMORY_WAIT_TIME; - do { - status = SMC_inb(dev, LAN91C96_INT_STATS); - if (status & LAN91C96_IST_ALLOC_INT) { - - SMC_outb(dev, LAN91C96_IST_ALLOC_INT, - LAN91C96_INT_STATS); - break; - } - } while (--time_out); - - if (!time_out) { - PRINTK2 ("%s: memory allocation, try %d failed ...\n", - dev->name, try); - if (try < SMC_ALLOC_MAX_TRY) - goto again; - else - return 0; - } - - PRINTK2 ("%s: memory allocation, try %d succeeded ...\n", - dev->name, try); - - /* I can send the packet now.. */ - buf = (byte *) packet; - - /* If I get here, I _know_ there is a packet slot waiting for me */ - packet_no = SMC_inb(dev, LAN91C96_ARR); - if (packet_no & LAN91C96_ARR_FAILED) { - /* or isn't there? BAD CHIP! */ - printf("%s: Memory allocation failed. \n", dev->name); - return 0; - } - - /* we have a packet address, so tell the card to use it */ - SMC_outb(dev, packet_no, LAN91C96_PNR); - - /* point to the beginning of the packet */ - SMC_outw(dev, LAN91C96_PTR_AUTO_INCR, LAN91C96_POINTER); - - PRINTK3("%s: Trying to xmit packet of length %x\n", - dev->name, length); - -#if SMC_DEBUG > 2 - printf ("Transmitting Packet\n"); - print_packet (buf, length); -#endif - - /* send the packet length ( +6 for status, length and ctl byte ) - and the status word ( set to zeros ) */ -#ifdef USE_32_BIT - SMC_outl(dev, (length + 6) << 16, LAN91C96_DATA_HIGH); -#else - SMC_outw(dev, 0, LAN91C96_DATA_HIGH); - /* send the packet length ( +6 for status words, length, and ctl */ - SMC_outw(dev, (length + 6), LAN91C96_DATA_HIGH); -#endif /* USE_32_BIT */ - - /* send the actual data - * I _think_ it's faster to send the longs first, and then - * mop up by sending the last word. It depends heavily - * on alignment, at least on the 486. Maybe it would be - * a good idea to check which is optimal? But that could take - * almost as much time as is saved? - */ -#ifdef USE_32_BIT - SMC_outsl(dev, LAN91C96_DATA_HIGH, buf, length >> 2); - if (length & 0x2) - SMC_outw(dev, *((word *) (buf + (length & 0xFFFFFFFC))), - LAN91C96_DATA_HIGH); -#else - SMC_outsw(dev, LAN91C96_DATA_HIGH, buf, (length) >> 1); -#endif /* USE_32_BIT */ - - /* Send the last byte, if there is one. */ - if ((length & 1) == 0) { - SMC_outw(dev, 0, LAN91C96_DATA_HIGH); - } else { - SMC_outw(dev, buf[length - 1] | 0x2000, LAN91C96_DATA_HIGH); - } - - /* and let the chipset deal with it */ - SMC_outw(dev, LAN91C96_MMUCR_ENQUEUE, LAN91C96_MMU); - - /* poll for TX INT */ - if (poll4int (dev, LAN91C96_MSK_TX_INT, SMC_TX_TIMEOUT)) { - /* sending failed */ - PRINTK2("%s: TX timeout, sending failed...\n", dev->name); - - /* release packet */ - SMC_outw(dev, LAN91C96_MMUCR_RELEASE_TX, LAN91C96_MMU); - - /* wait for MMU getting ready (low) */ - while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) - udelay(10); - - PRINTK2("MMU ready\n"); - - - return 0; - } else { - /* ack. int */ - SMC_outw(dev, LAN91C96_IST_TX_INT, LAN91C96_INT_STATS); - - PRINTK2("%s: Sent packet of length %d \n", dev->name, length); - - /* release packet */ - SMC_outw(dev, LAN91C96_MMUCR_RELEASE_TX, LAN91C96_MMU); - - /* wait for MMU getting ready (low) */ - while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) - udelay(10); - - PRINTK2 ("MMU ready\n"); - } - - return length; -} - - -/* - * Open and Initialize the board - * - * Set up everything, reset the card, etc .. - * - */ -static int smc_open(struct bd_info *bd, struct eth_device *dev) -{ - int i, err; /* used to set hw ethernet address */ - - PRINTK2("%s:smc_open\n", dev->name); - - /* reset the hardware */ - - smc_reset(dev); - smc_enable(dev); - - SMC_SELECT_BANK(dev, 1); - /* set smc_mac_addr, and sync it with u-boot globals */ - err = smc_get_ethaddr(bd, dev); - if (err < 0) - return -1; -#ifdef USE_32_BIT - for (i = 0; i < 6; i += 2) { - word address; - - address = smc_mac_addr[i + 1] << 8; - address |= smc_mac_addr[i]; - SMC_outw(dev, address, LAN91C96_IA0 + i); - } -#else - for (i = 0; i < 6; i++) - SMC_outb(dev, smc_mac_addr[i], LAN91C96_IA0 + i); -#endif - return 0; -} - -/*------------------------------------------------------------- - * - * smc_rcv - receive a packet from the card - * - * There is ( at least ) a packet waiting to be read from - * chip-memory. - * - * o Read the status - * o If an error, record it - * o otherwise, read in the packet - *------------------------------------------------------------- - */ -static int smc_rcv(struct eth_device *dev) -{ - int packet_number; - word status; - word packet_length; - int is_error = 0; - -#ifdef USE_32_BIT - dword stat_len; -#endif - - - SMC_SELECT_BANK(dev, 2); - packet_number = SMC_inw(dev, LAN91C96_FIFO); - - if (packet_number & LAN91C96_FIFO_RXEMPTY) { - return 0; - } - - PRINTK3("%s:smc_rcv\n", dev->name); - /* start reading from the start of the packet */ - SMC_outw(dev, LAN91C96_PTR_READ | LAN91C96_PTR_RCV | - LAN91C96_PTR_AUTO_INCR, LAN91C96_POINTER); - - /* First two words are status and packet_length */ -#ifdef USE_32_BIT - stat_len = SMC_inl(dev, LAN91C96_DATA_HIGH); - status = stat_len & 0xffff; - packet_length = stat_len >> 16; -#else - status = SMC_inw(dev, LAN91C96_DATA_HIGH); - packet_length = SMC_inw(dev, LAN91C96_DATA_HIGH); -#endif - - packet_length &= 0x07ff; /* mask off top bits */ - - PRINTK2 ("RCV: STATUS %4x LENGTH %4x\n", status, packet_length); - - if (!(status & FRAME_FILTER)) { - /* Adjust for having already read the first two words */ - packet_length -= 4; /*4; */ - - - /* set odd length for bug in LAN91C111, */ - /* which never sets RS_ODDFRAME */ - /* TODO ? */ - - -#ifdef USE_32_BIT - PRINTK3 (" Reading %d dwords (and %d bytes) \n", - packet_length >> 2, packet_length & 3); - /* QUESTION: Like in the TX routine, do I want - to send the DWORDs or the bytes first, or some - mixture. A mixture might improve already slow PIO - performance */ - SMC_insl(dev, LAN91C96_DATA_HIGH, net_rx_packets[0], - packet_length >> 2); - /* read the left over bytes */ - if (packet_length & 3) { - int i; - - byte *tail = (byte *)(net_rx_packets[0] + - (packet_length & ~3)); - dword leftover = SMC_inl(dev, LAN91C96_DATA_HIGH); - - for (i = 0; i < (packet_length & 3); i++) - *tail++ = (byte) (leftover >> (8 * i)) & 0xff; - } -#else - PRINTK3(" Reading %d words and %d byte(s)\n", - (packet_length >> 1), packet_length & 1); - SMC_insw(dev, LAN91C96_DATA_HIGH, net_rx_packets[0], - packet_length >> 1); - -#endif /* USE_32_BIT */ - -#if SMC_DEBUG > 2 - printf ("Receiving Packet\n"); - print_packet((byte *)net_rx_packets[0], packet_length); -#endif - } else { - /* error ... */ - /* TODO ? */ - is_error = 1; - } - - while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) - udelay(1); /* Wait until not busy */ - - /* error or good, tell the card to get rid of this packet */ - SMC_outw(dev, LAN91C96_MMUCR_RELEASE_RX, LAN91C96_MMU); - - while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) - udelay(1); /* Wait until not busy */ - - if (!is_error) { - /* Pass the packet up to the protocol layers. */ - net_process_received_packet(net_rx_packets[0], packet_length); - return packet_length; - } else { - return 0; - } - -} - -/*---------------------------------------------------- - * smc_close - * - * this makes the board clean up everything that it can - * and not talk to the outside world. Caused by - * an 'ifconfig ethX down' - * - -----------------------------------------------------*/ -static int smc_close(struct eth_device *dev) -{ - PRINTK2("%s:smc_close\n", dev->name); - - /* clear everything */ - smc_shutdown(dev); - - return 0; -} - -#if SMC_DEBUG > 2 -static void print_packet(byte *buf, int length) -{ -#if 0 - int i; - int remainder; - int lines; - - printf ("Packet of length %d \n", length); - - lines = length / 16; - remainder = length % 16; - - for (i = 0; i < lines; i++) { - int cur; - - for (cur = 0; cur < 8; cur++) { - byte a, b; - - a = *(buf++); - b = *(buf++); - printf ("%02x%02x ", a, b); - } - printf ("\n"); - } - for (i = 0; i < remainder / 2; i++) { - byte a, b; - - a = *(buf++); - b = *(buf++); - printf ("%02x%02x ", a, b); - } - printf ("\n"); -#endif /* 0 */ -} -#endif /* SMC_DEBUG > 2 */ - -static int lan91c96_init(struct eth_device *dev, struct bd_info *bd) -{ - return smc_open(bd, dev); -} - -static void lan91c96_halt(struct eth_device *dev) -{ - smc_close(dev); -} - -static int lan91c96_recv(struct eth_device *dev) -{ - return smc_rcv(dev); -} - -static int lan91c96_send(struct eth_device *dev, void *packet, - int length) -{ - return smc_send_packet(dev, packet, length); -} - -/* smc_get_ethaddr - * - * This checks both the environment and the ROM for an ethernet address. If - * found, the environment takes precedence. - */ - -static int smc_get_ethaddr(struct bd_info *bd, struct eth_device *dev) -{ - uchar v_mac[6]; - - if (!eth_env_get_enetaddr("ethaddr", v_mac)) { - /* get ROM mac value if any */ - if (!get_rom_mac(dev, v_mac)) { - printf("\n*** ERROR: ethaddr is NOT set !!\n"); - return -1; - } - eth_env_set_enetaddr("ethaddr", v_mac); - } - - smc_set_mac_addr(v_mac); /* use old function to update smc default */ - PRINTK("Using MAC Address %pM\n", v_mac); - return 0; -} - -/* - * get_rom_mac() - * Note, this has omly been tested for the OMAP730 P2. - */ - -static int get_rom_mac(struct eth_device *dev, unsigned char *v_rom_mac) -{ - int i; - SMC_SELECT_BANK(dev, 1); - for (i=0; i<6; i++) - { - v_rom_mac[i] = SMC_inb(dev, LAN91C96_IA0 + i); - } - return (1); -} - -/* Structure to detect the device IDs */ -struct id_type { - u8 id; - char *name; -}; -static struct id_type supported_chips[] = { - {0, ""}, /* Dummy entry to prevent id check failure */ - {9, "LAN91C110"}, - {8, "LAN91C100FD"}, - {7, "LAN91C100"}, - {5, "LAN91C95"}, - {4, "LAN91C94/96"}, - {3, "LAN91C90/92"}, -}; -/* lan91c96_detect_chip - * See: - * http://www.embeddedsys.com/subpages/resources/images/documents/LAN91C96_datasheet.pdf - * page 71 - that is the closest we get to detect this device - */ -static int lan91c96_detect_chip(struct eth_device *dev) -{ - u8 chip_id; - int r; - SMC_SELECT_BANK(dev, 3); - chip_id = (SMC_inw(dev, 0xA) & LAN91C96_REV_CHIPID) >> 4; - SMC_SELECT_BANK(dev, 0); - for (r = 0; r < ARRAY_SIZE(supported_chips); r++) - if (chip_id == supported_chips[r].id) - return r; - return 0; -} - -int lan91c96_initialize(u8 dev_num, int base_addr) -{ - struct eth_device *dev; - int r = 0; - - dev = malloc(sizeof(*dev)); - if (!dev) { - return 0; - } - memset(dev, 0, sizeof(*dev)); - - dev->iobase = base_addr; - - /* Try to detect chip. Will fail if not present. */ - r = lan91c96_detect_chip(dev); - if (!r) { - free(dev); - return 0; - } - get_rom_mac(dev, dev->enetaddr); - - dev->init = lan91c96_init; - dev->halt = lan91c96_halt; - dev->send = lan91c96_send; - dev->recv = lan91c96_recv; - sprintf(dev->name, "%s-%hu", supported_chips[r].name, dev_num); - - eth_register(dev); - return 0; -} diff --git a/drivers/net/lan91c96.h b/drivers/net/lan91c96.h deleted file mode 100644 index c76348084a..0000000000 --- a/drivers/net/lan91c96.h +++ /dev/null @@ -1,616 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/*------------------------------------------------------------------------ - * lan91c96.h - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Rolf Offermanns - * Copyright (C) 2001 Standard Microsystems Corporation (SMSC) - * Developed by Simple Network Magic Corporation (SNMC) - * Copyright (C) 1996 by Erik Stahlman (ES) - * - * This file contains register information and access macros for - * the LAN91C96 single chip ethernet controller. It is a modified - * version of the smc9111.h file. - * - * Information contained in this file was obtained from the LAN91C96 - * manual from SMC. To get a copy, if you really want one, you can find - * information under www.smsc.com. - * - * Authors - * Erik Stahlman ( erik@vt.edu ) - * Daris A Nevil ( dnevil@snmc.com ) - * - * History - * 04/30/03 Mathijs Haarman Modified smc91111.h (u-boot version) - * for lan91c96 - *------------------------------------------------------------------------- - */ -#ifndef _LAN91C96_H_ -#define _LAN91C96_H_ - -#include -#include -#include - -/* I want some simple types */ - -typedef unsigned char byte; -typedef unsigned short word; -typedef unsigned long int dword; - -/* - * DEBUGGING LEVELS - * - * 0 for normal operation - * 1 for slightly more details - * >2 for various levels of increasingly useless information - * 2 for interrupt tracking, status flags - * 3 for packet info - * 4 for complete packet dumps - */ -/*#define SMC_DEBUG 0 */ - -/* Because of bank switching, the LAN91xxx uses only 16 I/O ports */ - -#define SMC_IO_EXTENT 16 - -#ifdef CONFIG_CPU_PXA25X - -#define SMC_IO_SHIFT 0 - -#define SMCREG(edev, r) ((edev)->iobase+((r)<>= 8; \ - else __v &= 0xff; \ - __v; }) - -#define SMC_outl(edev, d, r) (*((volatile dword *)SMCREG(edev, r)) = d) -#define SMC_outw(edev, d, r) (*((volatile word *)SMCREG(edev, r)) = d) -#define SMC_outb(edev, d, r) ({ word __d = (byte)(d); \ - word __w = SMC_inw(edev, (r)&~1); \ - __w &= ((r)&1) ? 0x00FF : 0xFF00; \ - __w |= ((r)&1) ? __d<<8 : __d; \ - SMC_outw(edev, __w, (r)&~1); \ - }) - -#define SMC_outsl(edev, r, b, l) ({ int __i; \ - dword *__b2; \ - __b2 = (dword *) b; \ - for (__i = 0; __i < l; __i++) { \ - SMC_outl(edev, *(__b2 + __i),\ - r); \ - } \ - }) - -#define SMC_outsw(edev, r, b, l) ({ int __i; \ - word *__b2; \ - __b2 = (word *) b; \ - for (__i = 0; __i < l; __i++) { \ - SMC_outw(edev, *(__b2 + __i),\ - r); \ - } \ - }) - -#define SMC_insl(edev, r, b, l) ({ int __i ; \ - dword *__b2; \ - __b2 = (dword *) b; \ - for (__i = 0; __i < l; __i++) { \ - *(__b2 + __i) = SMC_inl(edev,\ - r); \ - SMC_inl(edev, 0); \ - }; \ - }) - -#define SMC_insw(edev, r, b, l) ({ int __i ; \ - word *__b2; \ - __b2 = (word *) b; \ - for (__i = 0; __i < l; __i++) { \ - *(__b2 + __i) = SMC_inw(edev,\ - r); \ - SMC_inw(edev, 0); \ - }; \ - }) - -#define SMC_insb(edev, r, b, l) ({ int __i ; \ - byte *__b2; \ - __b2 = (byte *) b; \ - for (__i = 0; __i < l; __i++) { \ - *(__b2 + __i) = SMC_inb(edev,\ - r); \ - SMC_inb(edev, 0); \ - }; \ - }) - -#else /* if not CONFIG_CPU_PXA25X */ - -/* - * We have only 16 Bit PCMCIA access on Socket 0 - */ - -#define SMC_inw(edev, r) (*((volatile word *)((edev)->iobase+(r)))) -#define SMC_inb(edev, r) (((r)&1) ? SMC_inw(edev, (r)&~1)>>8 :\ - SMC_inw(edev, r)&0xFF) - -#define SMC_outw(edev, d, r) (*((volatile word *)((edev)->iobase+(r))) = d) -#define SMC_outb(edev, d, r) ({ word __d = (byte)(d); \ - word __w = SMC_inw(edev, (r)&~1); \ - __w &= ((r)&1) ? 0x00FF : 0xFF00; \ - __w |= ((r)&1) ? __d<<8 : __d; \ - SMC_outw(edev, __w, (r)&~1); \ - }) -#define SMC_outsw(edev, r, b, l) ({ int __i; \ - word *__b2; \ - __b2 = (word *) b; \ - for (__i = 0; __i < l; __i++) { \ - SMC_outw(edev, *(__b2 + __i),\ - r); \ - } \ - }) - -#define SMC_insw(edev, r, b, l) ({ int __i ; \ - word *__b2; \ - __b2 = (word *) b; \ - for (__i = 0; __i < l; __i++) { \ - *(__b2 + __i) = SMC_inw(edev,\ - r); \ - SMC_inw(edev, 0); \ - }; \ - }) - -#endif - -/* - **************************************************************************** - * Bank Select Field - **************************************************************************** - */ -#define LAN91C96_BANK_SELECT 14 /* Bank Select Register */ -#define LAN91C96_BANKSELECT (0x3UC << 0) -#define BANK0 0x00 -#define BANK1 0x01 -#define BANK2 0x02 -#define BANK3 0x03 -#define BANK4 0x04 - -/* - **************************************************************************** - * EEPROM Addresses. - **************************************************************************** - */ -#define EEPROM_MAC_OFFSET_1 0x6020 -#define EEPROM_MAC_OFFSET_2 0x6021 -#define EEPROM_MAC_OFFSET_3 0x6022 - -/* - **************************************************************************** - * Bank 0 Register Map in I/O Space - **************************************************************************** - */ -#define LAN91C96_TCR 0 /* Transmit Control Register */ -#define LAN91C96_EPH_STATUS 2 /* EPH Status Register */ -#define LAN91C96_RCR 4 /* Receive Control Register */ -#define LAN91C96_COUNTER 6 /* Counter Register */ -#define LAN91C96_MIR 8 /* Memory Information Register */ -#define LAN91C96_MCR 10 /* Memory Configuration Register */ - -/* - **************************************************************************** - * Transmit Control Register - Bank 0 - Offset 0 - **************************************************************************** - */ -#define LAN91C96_TCR_TXENA (0x1U << 0) -#define LAN91C96_TCR_LOOP (0x1U << 1) -#define LAN91C96_TCR_FORCOL (0x1U << 2) -#define LAN91C96_TCR_TXP_EN (0x1U << 3) -#define LAN91C96_TCR_PAD_EN (0x1U << 7) -#define LAN91C96_TCR_NOCRC (0x1U << 8) -#define LAN91C96_TCR_MON_CSN (0x1U << 10) -#define LAN91C96_TCR_FDUPLX (0x1U << 11) -#define LAN91C96_TCR_STP_SQET (0x1U << 12) -#define LAN91C96_TCR_EPH_LOOP (0x1U << 13) -#define LAN91C96_TCR_ETEN_TYPE (0x1U << 14) -#define LAN91C96_TCR_FDSE (0x1U << 15) - -/* - **************************************************************************** - * EPH Status Register - Bank 0 - Offset 2 - **************************************************************************** - */ -#define LAN91C96_EPHSR_TX_SUC (0x1U << 0) -#define LAN91C96_EPHSR_SNGL_COL (0x1U << 1) -#define LAN91C96_EPHSR_MUL_COL (0x1U << 2) -#define LAN91C96_EPHSR_LTX_MULT (0x1U << 3) -#define LAN91C96_EPHSR_16COL (0x1U << 4) -#define LAN91C96_EPHSR_SQET (0x1U << 5) -#define LAN91C96_EPHSR_LTX_BRD (0x1U << 6) -#define LAN91C96_EPHSR_TX_DEFR (0x1U << 7) -#define LAN91C96_EPHSR_WAKEUP (0x1U << 8) -#define LAN91C96_EPHSR_LATCOL (0x1U << 9) -#define LAN91C96_EPHSR_LOST_CARR (0x1U << 10) -#define LAN91C96_EPHSR_EXC_DEF (0x1U << 11) -#define LAN91C96_EPHSR_CTR_ROL (0x1U << 12) - -#define LAN91C96_EPHSR_LINK_OK (0x1U << 14) -#define LAN91C96_EPHSR_TX_UNRN (0x1U << 15) - -#define LAN91C96_EPHSR_ERRORS (LAN91C96_EPHSR_SNGL_COL | \ - LAN91C96_EPHSR_MUL_COL | \ - LAN91C96_EPHSR_16COL | \ - LAN91C96_EPHSR_SQET | \ - LAN91C96_EPHSR_TX_DEFR | \ - LAN91C96_EPHSR_LATCOL | \ - LAN91C96_EPHSR_LOST_CARR | \ - LAN91C96_EPHSR_EXC_DEF | \ - LAN91C96_EPHSR_LINK_OK | \ - LAN91C96_EPHSR_TX_UNRN) - -/* - **************************************************************************** - * Receive Control Register - Bank 0 - Offset 4 - **************************************************************************** - */ -#define LAN91C96_RCR_RX_ABORT (0x1U << 0) -#define LAN91C96_RCR_PRMS (0x1U << 1) -#define LAN91C96_RCR_ALMUL (0x1U << 2) -#define LAN91C96_RCR_RXEN (0x1U << 8) -#define LAN91C96_RCR_STRIP_CRC (0x1U << 9) -#define LAN91C96_RCR_FILT_CAR (0x1U << 14) -#define LAN91C96_RCR_SOFT_RST (0x1U << 15) - -/* - **************************************************************************** - * Counter Register - Bank 0 - Offset 6 - **************************************************************************** - */ -#define LAN91C96_ECR_SNGL_COL (0xFU << 0) -#define LAN91C96_ECR_MULT_COL (0xFU << 5) -#define LAN91C96_ECR_DEF_TX (0xFU << 8) -#define LAN91C96_ECR_EXC_DEF_TX (0xFU << 12) - -/* - **************************************************************************** - * Memory Information Register - Bank 0 - OFfset 8 - **************************************************************************** - */ -#define LAN91C96_MIR_SIZE (0x18 << 0) /* 6144 bytes */ - -/* - **************************************************************************** - * Memory Configuration Register - Bank 0 - Offset 10 - **************************************************************************** - */ -#define LAN91C96_MCR_MEM_RES (0xFFU << 0) -#define LAN91C96_MCR_MEM_MULT (0x3U << 9) -#define LAN91C96_MCR_HIGH_ID (0x3U << 12) - -#define LAN91C96_MCR_TRANSMIT_PAGES 0x6 - -/* - **************************************************************************** - * Bank 1 Register Map in I/O Space - **************************************************************************** - */ -#define LAN91C96_CONFIG 0 /* Configuration Register */ -#define LAN91C96_BASE 2 /* Base Address Register */ -#define LAN91C96_IA0 4 /* Individual Address Register - 0 */ -#define LAN91C96_IA1 5 /* Individual Address Register - 1 */ -#define LAN91C96_IA2 6 /* Individual Address Register - 2 */ -#define LAN91C96_IA3 7 /* Individual Address Register - 3 */ -#define LAN91C96_IA4 8 /* Individual Address Register - 4 */ -#define LAN91C96_IA5 9 /* Individual Address Register - 5 */ -#define LAN91C96_GEN_PURPOSE 10 /* General Address Registers */ -#define LAN91C96_CONTROL 12 /* Control Register */ - -/* - **************************************************************************** - * Configuration Register - Bank 1 - Offset 0 - **************************************************************************** - */ -#define LAN91C96_CR_INT_SEL0 (0x1U << 1) -#define LAN91C96_CR_INT_SEL1 (0x1U << 2) -#define LAN91C96_CR_RES (0x3U << 3) -#define LAN91C96_CR_DIS_LINK (0x1U << 6) -#define LAN91C96_CR_16BIT (0x1U << 7) -#define LAN91C96_CR_AUI_SELECT (0x1U << 8) -#define LAN91C96_CR_SET_SQLCH (0x1U << 9) -#define LAN91C96_CR_FULL_STEP (0x1U << 10) -#define LAN91C96_CR_NO_WAIT (0x1U << 12) - -/* - **************************************************************************** - * Base Address Register - Bank 1 - Offset 2 - **************************************************************************** - */ -#define LAN91C96_BAR_RA_BITS (0x27U << 0) -#define LAN91C96_BAR_ROM_SIZE (0x1U << 6) -#define LAN91C96_BAR_A_BITS (0xFFU << 8) - -/* - **************************************************************************** - * Control Register - Bank 1 - Offset 12 - **************************************************************************** - */ -#define LAN91C96_CTR_STORE (0x1U << 0) -#define LAN91C96_CTR_RELOAD (0x1U << 1) -#define LAN91C96_CTR_EEPROM (0x1U << 2) -#define LAN91C96_CTR_TE_ENABLE (0x1U << 5) -#define LAN91C96_CTR_CR_ENABLE (0x1U << 6) -#define LAN91C96_CTR_LE_ENABLE (0x1U << 7) -#define LAN91C96_CTR_BIT_8 (0x1U << 8) -#define LAN91C96_CTR_AUTO_RELEASE (0x1U << 11) -#define LAN91C96_CTR_WAKEUP_EN (0x1U << 12) -#define LAN91C96_CTR_PWRDN (0x1U << 13) -#define LAN91C96_CTR_RCV_BAD (0x1U << 14) - -/* - **************************************************************************** - * Bank 2 Register Map in I/O Space - **************************************************************************** - */ -#define LAN91C96_MMU 0 /* MMU Command Register */ -#define LAN91C96_AUTO_TX_START 1 /* Auto Tx Start Register */ -#define LAN91C96_PNR 2 /* Packet Number Register */ -#define LAN91C96_ARR 3 /* Allocation Result Register */ -#define LAN91C96_FIFO 4 /* FIFO Ports Register */ -#define LAN91C96_POINTER 6 /* Pointer Register */ -#define LAN91C96_DATA_HIGH 8 /* Data High Register */ -#define LAN91C96_DATA_LOW 10 /* Data Low Register */ -#define LAN91C96_INT_STATS 12 /* Interrupt Status Register - RO */ -#define LAN91C96_INT_ACK 12 /* Interrupt Acknowledge Register -WO */ -#define LAN91C96_INT_MASK 13 /* Interrupt Mask Register */ - -/* - **************************************************************************** - * MMU Command Register - Bank 2 - Offset 0 - **************************************************************************** - */ -#define LAN91C96_MMUCR_NO_BUSY (0x1U << 0) -#define LAN91C96_MMUCR_N1 (0x1U << 1) -#define LAN91C96_MMUCR_N2 (0x1U << 2) -#define LAN91C96_MMUCR_COMMAND (0xFU << 4) -#define LAN91C96_MMUCR_ALLOC_TX (0x2U << 4) /* WXYZ = 0010 */ -#define LAN91C96_MMUCR_RESET_MMU (0x4U << 4) /* WXYZ = 0100 */ -#define LAN91C96_MMUCR_REMOVE_RX (0x6U << 4) /* WXYZ = 0110 */ -#define LAN91C96_MMUCR_REMOVE_TX (0x7U << 4) /* WXYZ = 0111 */ -#define LAN91C96_MMUCR_RELEASE_RX (0x8U << 4) /* WXYZ = 1000 */ -#define LAN91C96_MMUCR_RELEASE_TX (0xAU << 4) /* WXYZ = 1010 */ -#define LAN91C96_MMUCR_ENQUEUE (0xCU << 4) /* WXYZ = 1100 */ -#define LAN91C96_MMUCR_RESET_TX (0xEU << 4) /* WXYZ = 1110 */ - -/* - **************************************************************************** - * Auto Tx Start Register - Bank 2 - Offset 1 - **************************************************************************** - */ -#define LAN91C96_AUTOTX (0xFFU << 0) - -/* - **************************************************************************** - * Packet Number Register - Bank 2 - Offset 2 - **************************************************************************** - */ -#define LAN91C96_PNR_TX (0x1FU << 0) - -/* - **************************************************************************** - * Allocation Result Register - Bank 2 - Offset 3 - **************************************************************************** - */ -#define LAN91C96_ARR_ALLOC_PN (0x7FU << 0) -#define LAN91C96_ARR_FAILED (0x1U << 7) - -/* - **************************************************************************** - * FIFO Ports Register - Bank 2 - Offset 4 - **************************************************************************** - */ -#define LAN91C96_FIFO_TX_DONE_PN (0x1FU << 0) -#define LAN91C96_FIFO_TEMPTY (0x1U << 7) -#define LAN91C96_FIFO_RX_DONE_PN (0x1FU << 8) -#define LAN91C96_FIFO_RXEMPTY (0x1U << 15) - -/* - **************************************************************************** - * Pointer Register - Bank 2 - Offset 6 - **************************************************************************** - */ -#define LAN91C96_PTR_LOW (0xFFU << 0) -#define LAN91C96_PTR_HIGH (0x7U << 8) -#define LAN91C96_PTR_AUTO_TX (0x1U << 11) -#define LAN91C96_PTR_ETEN (0x1U << 12) -#define LAN91C96_PTR_READ (0x1U << 13) -#define LAN91C96_PTR_AUTO_INCR (0x1U << 14) -#define LAN91C96_PTR_RCV (0x1U << 15) - -#define LAN91C96_PTR_RX_FRAME (LAN91C96_PTR_RCV | \ - LAN91C96_PTR_AUTO_INCR | \ - LAN91C96_PTR_READ) - -/* - **************************************************************************** - * Data Register - Bank 2 - Offset 8 - **************************************************************************** - */ -#define LAN91C96_CONTROL_CRC (0x1U << 4) /* CRC bit */ -#define LAN91C96_CONTROL_ODD (0x1U << 5) /* ODD bit */ - -/* - **************************************************************************** - * Interrupt Status Register - Bank 2 - Offset 12 - **************************************************************************** - */ -#define LAN91C96_IST_RCV_INT (0x1U << 0) -#define LAN91C96_IST_TX_INT (0x1U << 1) -#define LAN91C96_IST_TX_EMPTY_INT (0x1U << 2) -#define LAN91C96_IST_ALLOC_INT (0x1U << 3) -#define LAN91C96_IST_RX_OVRN_INT (0x1U << 4) -#define LAN91C96_IST_EPH_INT (0x1U << 5) -#define LAN91C96_IST_ERCV_INT (0x1U << 6) -#define LAN91C96_IST_RX_IDLE_INT (0x1U << 7) - -/* - **************************************************************************** - * Interrupt Acknowledge Register - Bank 2 - Offset 12 - **************************************************************************** - */ -#define LAN91C96_ACK_TX_INT (0x1U << 1) -#define LAN91C96_ACK_TX_EMPTY_INT (0x1U << 2) -#define LAN91C96_ACK_RX_OVRN_INT (0x1U << 4) -#define LAN91C96_ACK_ERCV_INT (0x1U << 6) - -/* - **************************************************************************** - * Interrupt Mask Register - Bank 2 - Offset 13 - **************************************************************************** - */ -#define LAN91C96_MSK_RCV_INT (0x1U << 0) -#define LAN91C96_MSK_TX_INT (0x1U << 1) -#define LAN91C96_MSK_TX_EMPTY_INT (0x1U << 2) -#define LAN91C96_MSK_ALLOC_INT (0x1U << 3) -#define LAN91C96_MSK_RX_OVRN_INT (0x1U << 4) -#define LAN91C96_MSK_EPH_INT (0x1U << 5) -#define LAN91C96_MSK_ERCV_INT (0x1U << 6) -#define LAN91C96_MSK_TX_IDLE_INT (0x1U << 7) - -/* - **************************************************************************** - * Bank 3 Register Map in I/O Space - ************************************************************************** - */ -#define LAN91C96_MGMT_MDO (0x1U << 0) -#define LAN91C96_MGMT_MDI (0x1U << 1) -#define LAN91C96_MGMT_MCLK (0x1U << 2) -#define LAN91C96_MGMT_MDOE (0x1U << 3) -#define LAN91C96_MGMT_LOW_ID (0x3U << 4) -#define LAN91C96_MGMT_IOS0 (0x1U << 8) -#define LAN91C96_MGMT_IOS1 (0x1U << 9) -#define LAN91C96_MGMT_IOS2 (0x1U << 10) -#define LAN91C96_MGMT_nXNDEC (0x1U << 11) -#define LAN91C96_MGMT_HIGH_ID (0x3U << 12) - -/* - **************************************************************************** - * Revision Register - Bank 3 - Offset 10 - **************************************************************************** - */ -#define LAN91C96_REV_REVID (0xFU << 0) -#define LAN91C96_REV_CHIPID (0xFU << 4) - -/* - **************************************************************************** - * Early RCV Register - Bank 3 - Offset 12 - **************************************************************************** - */ -#define LAN91C96_ERCV_THRESHOLD (0x1FU << 0) -#define LAN91C96_ERCV_RCV_DISCRD (0x1U << 7) - -/* - **************************************************************************** - * PCMCIA Configuration Registers - **************************************************************************** - */ -#define LAN91C96_ECOR 0x8000 /* Ethernet Configuration Register */ -#define LAN91C96_ECSR 0x8002 /* Ethernet Configuration and Status */ - -/* - **************************************************************************** - * PCMCIA Ethernet Configuration Option Register (ECOR) - **************************************************************************** - */ -#define LAN91C96_ECOR_ENABLE (0x1U << 0) -#define LAN91C96_ECOR_WR_ATTRIB (0x1U << 2) -#define LAN91C96_ECOR_LEVEL_REQ (0x1U << 6) -#define LAN91C96_ECOR_SRESET (0x1U << 7) - -/* - **************************************************************************** - * PCMCIA Ethernet Configuration and Status Register (ECSR) - **************************************************************************** - */ -#define LAN91C96_ECSR_INTR (0x1U << 1) -#define LAN91C96_ECSR_PWRDWN (0x1U << 2) -#define LAN91C96_ECSR_IOIS8 (0x1U << 5) - -/* - **************************************************************************** - * Receive Frame Status Word - See page 38 of the LAN91C96 specification. - **************************************************************************** - */ -#define LAN91C96_TOO_SHORT (0x1U << 10) -#define LAN91C96_TOO_LONG (0x1U << 11) -#define LAN91C96_ODD_FRM (0x1U << 12) -#define LAN91C96_BAD_CRC (0x1U << 13) -#define LAN91C96_BROD_CAST (0x1U << 14) -#define LAN91C96_ALGN_ERR (0x1U << 15) - -#define FRAME_FILTER (LAN91C96_TOO_SHORT | LAN91C96_TOO_LONG | LAN91C96_BAD_CRC | LAN91C96_ALGN_ERR) - -/* - **************************************************************************** - * Default MAC Address - **************************************************************************** - */ -#define MAC_DEF_HI 0x0800 -#define MAC_DEF_MED 0x3333 -#define MAC_DEF_LO 0x0100 - -/* - **************************************************************************** - * Default I/O Signature - 0x33 - **************************************************************************** - */ -#define LAN91C96_LOW_SIGNATURE (0x33U << 0) -#define LAN91C96_HIGH_SIGNATURE (0x33U << 8) -#define LAN91C96_SIGNATURE (LAN91C96_HIGH_SIGNATURE | LAN91C96_LOW_SIGNATURE) - -#define LAN91C96_MAX_PAGES 6 /* Maximum number of 256 pages. */ -#define ETHERNET_MAX_LENGTH 1514 - - -/*------------------------------------------------------------------------- - * I define some macros to make it easier to do somewhat common - * or slightly complicated, repeated tasks. - *------------------------------------------------------------------------- - */ - -/* select a register bank, 0 to 3 */ - -#define SMC_SELECT_BANK(edev, x) { SMC_outw(edev, x, LAN91C96_BANK_SELECT); } - -/* this enables an interrupt in the interrupt mask register */ -#define SMC_ENABLE_INT(edev, x) {\ - unsigned char mask;\ - SMC_SELECT_BANK(edev, 2);\ - mask = SMC_inb(edev, LAN91C96_INT_MASK);\ - mask |= (x);\ - SMC_outb(edev, mask, LAN91C96_INT_MASK); \ -} - -/* this disables an interrupt from the interrupt mask register */ - -#define SMC_DISABLE_INT(edev, x) {\ - unsigned char mask;\ - SMC_SELECT_BANK(edev, 2);\ - mask = SMC_inb(edev, LAN91C96_INT_MASK);\ - mask &= ~(x);\ - SMC_outb(edev, mask, LAN91C96_INT_MASK); \ -} - -/*---------------------------------------------------------------------- - * Define the interrupts that I want to receive from the card - * - * I want: - * LAN91C96_IST_EPH_INT, for nasty errors - * LAN91C96_IST_RCV_INT, for happy received packets - * LAN91C96_IST_RX_OVRN_INT, because I have to kick the receiver - *------------------------------------------------------------------------- - */ -#define SMC_INTERRUPT_MASK (LAN91C96_IST_EPH_INT | LAN91C96_IST_RX_OVRN_INT | LAN91C96_IST_RCV_INT) - -#endif /* _LAN91C96_H_ */