From: Quentin Schulz Date: Thu, 25 Apr 2024 10:46:26 +0000 (+0200) Subject: rockchip: nanopc-t6-rk3588: use DRAM banks from ATAGS X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=97eaedb60aca5657eba1b8380c6365dcb59f08da;p=u-boot.git rockchip: nanopc-t6-rk3588: use DRAM banks from ATAGS RK3588-based devices now support creating DRAM banks with proper holes by reading the ATAGS from Rockchip TPL blob, so let's use that mechanism instead. Since ft_board_setup isn't defined anymore, there's no need for selecting CONFIG_OF_BOARD_SETUP. Similarly, because the nanopc-t6-rk3588.c would be empty, it is simply removed, with the (would-be-empty) Makefile as well. The CONFIG_NR_DRAM_BANK now defaults to 10 which is a safe bet for reading banks from ATAGS, so let's use the default value instead. Co-developed-by: Chris Morgan Signed-off-by: Chris Morgan Signed-off-by: Quentin Schulz Reviewed-by: Kever Yang --- diff --git a/board/friendlyelec/nanopc-t6-rk3588/Makefile b/board/friendlyelec/nanopc-t6-rk3588/Makefile deleted file mode 100644 index c1c49b1970..0000000000 --- a/board/friendlyelec/nanopc-t6-rk3588/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (c) 2023 Rockchip Electronics Co,. Ltd. -# - -obj-y += nanopc-t6-rk3588.o diff --git a/board/friendlyelec/nanopc-t6-rk3588/nanopc-t6-rk3588.c b/board/friendlyelec/nanopc-t6-rk3588/nanopc-t6-rk3588.c deleted file mode 100644 index 99bbef964e..0000000000 --- a/board/friendlyelec/nanopc-t6-rk3588/nanopc-t6-rk3588.c +++ /dev/null @@ -1,39 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (c) 2023 Rockchip Electronics Co,. Ltd. - */ - -#include -#include - -#ifdef CONFIG_OF_BOARD_SETUP -int nanopc_t6_add_reserved_memory_fdt_nodes(void *new_blob) -{ - struct fdt_memory gap1 = { - .start = 0x3fc000000, - .end = 0x3fc4fffff, - }; - struct fdt_memory gap2 = { - .start = 0x3fff00000, - .end = 0x3ffffffff, - }; - unsigned long flags = FDTDEC_RESERVED_MEMORY_NO_MAP; - unsigned int ret; - - /* - * Inject the reserved-memory nodes into the DTS - */ - ret = fdtdec_add_reserved_memory(new_blob, "gap1", &gap1, NULL, 0, - NULL, flags); - if (ret) - return ret; - - return fdtdec_add_reserved_memory(new_blob, "gap2", &gap2, NULL, 0, - NULL, flags); -} - -int ft_board_setup(void *blob, struct bd_info *bd) -{ - return nanopc_t6_add_reserved_memory_fdt_nodes(blob); -} -#endif diff --git a/configs/nanopc-t6-rk3588_defconfig b/configs/nanopc-t6-rk3588_defconfig index 5c7bc0b719..738dda026b 100644 --- a/configs/nanopc-t6-rk3588_defconfig +++ b/configs/nanopc-t6-rk3588_defconfig @@ -3,7 +3,6 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_HAS_NONCACHED_MEMORY=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_NR_DRAM_BANKS=2 CONFIG_SF_DEFAULT_SPEED=24000000 CONFIG_SF_DEFAULT_MODE=0x2000 CONFIG_DEFAULT_DEVICE_TREE="rk3588-nanopc-t6" @@ -23,7 +22,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_SPL_FIT_SIGNATURE=y CONFIG_SPL_LOAD_FIT=y CONFIG_LEGACY_IMAGE_FORMAT=y -CONFIG_OF_BOARD_SETUP=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-nanopc-t6.dtb" # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y