From: Robert Marko Date: Thu, 8 Oct 2020 20:05:11 +0000 (+0200) Subject: net: Add IPQ40xx MDIO driver X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=975151d056acef155643bdb57b29a1a28ba5590f;p=u-boot.git net: Add IPQ40xx MDIO driver This adds the driver for the IPQ40xx built-in MDIO. This will be needed to support future PHY driver. Signed-off-by: Robert Marko Cc: Luka Perkov --- diff --git a/MAINTAINERS b/MAINTAINERS index d5a418d087..a80045fcd7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -242,6 +242,7 @@ F: include/dt-bindings/reset/qcom,ipq4019-reset.h F: drivers/reset/reset-ipq4019.c F: drivers/phy/phy-qcom-ipq4019-usb.c F: drivers/spi/spi-qup.c +F: drivers/net/mdio-ipq4019.c ARM MARVELL KIRKWOOD ARMADA-XP ARMADA-38X ARMADA-37XX ARMADA-7K/8K M: Stefan Roese diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 2beec2da41..3a5e036880 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -732,6 +732,13 @@ config MDIO_MUX_I2CREG an I2C chip. The board it was developed for uses a mux controlled by on-board FPGA which in turn is accessed as a chip over I2C. +config MDIO_IPQ4019 + bool "Qualcomm IPQ4019 MDIO interface support" + depends on DM_MDIO + help + This driver supports the MDIO interface found in Qualcomm + IPQ40xx series Soc-s. + config MVMDIO bool "Marvell MDIO interface support" depends on DM_MDIO diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 9f7a79ecb1..e3bdda359d 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_LAN91C96) += lan91c96.o obj-$(CONFIG_LPC32XX_ETH) += lpc32xx_eth.o obj-$(CONFIG_MACB) += macb.o obj-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o +obj-$(CONFIG_MDIO_IPQ4019) += mdio-ipq4019.o obj-$(CONFIG_MDIO_MUX_I2CREG) += mdio_mux_i2creg.o obj-$(CONFIG_MDIO_MUX_SANDBOX) += mdio_mux_sandbox.o obj-$(CONFIG_MPC8XX_FEC) += mpc8xx_fec.o diff --git a/drivers/net/mdio-ipq4019.c b/drivers/net/mdio-ipq4019.c new file mode 100644 index 0000000000..bc68e1d506 --- /dev/null +++ b/drivers/net/mdio-ipq4019.c @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Qualcomm IPQ4019 MDIO driver + * + * Copyright (c) 2020 Sartura Ltd. + * + * Author: Luka Kovacic + * Author: Robert Marko + * + * Based on Linux driver + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define MDIO_MODE_REG 0x40 +#define MDIO_ADDR_REG 0x44 +#define MDIO_DATA_WRITE_REG 0x48 +#define MDIO_DATA_READ_REG 0x4c +#define MDIO_CMD_REG 0x50 +#define MDIO_CMD_ACCESS_BUSY BIT(16) +#define MDIO_CMD_ACCESS_START BIT(8) +#define MDIO_CMD_ACCESS_CODE_READ 0 +#define MDIO_CMD_ACCESS_CODE_WRITE 1 + +/* 0 = Clause 22, 1 = Clause 45 */ +#define MDIO_MODE_BIT BIT(8) + +#define IPQ4019_MDIO_TIMEOUT 10000 +#define IPQ4019_MDIO_SLEEP 10 + +struct ipq4019_mdio_priv { + phys_addr_t mdio_base; +}; + +static int ipq4019_mdio_wait_busy(struct ipq4019_mdio_priv *priv) +{ + unsigned int busy; + + return readl_poll_sleep_timeout(priv->mdio_base + MDIO_CMD_REG, busy, + (busy & MDIO_CMD_ACCESS_BUSY) == 0, IPQ4019_MDIO_SLEEP, + IPQ4019_MDIO_TIMEOUT); +} + +int ipq4019_mdio_read(struct udevice *dev, int addr, int devad, int reg) +{ + struct ipq4019_mdio_priv *priv = dev_get_priv(dev); + unsigned int cmd; + + if (ipq4019_mdio_wait_busy(priv)) + return -ETIMEDOUT; + + /* Issue the phy address and reg */ + writel((addr << 8) | reg, priv->mdio_base + MDIO_ADDR_REG); + + cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_READ; + + /* Issue read command */ + writel(cmd, priv->mdio_base + MDIO_CMD_REG); + + /* Wait read complete */ + if (ipq4019_mdio_wait_busy(priv)) + return -ETIMEDOUT; + + /* Read and return data */ + return readl(priv->mdio_base + MDIO_DATA_READ_REG); +} + +int ipq4019_mdio_write(struct udevice *dev, int addr, int devad, + int reg, u16 val) +{ + struct ipq4019_mdio_priv *priv = dev_get_priv(dev); + unsigned int cmd; + + if (ipq4019_mdio_wait_busy(priv)) + return -ETIMEDOUT; + + /* Issue the phy addreass and reg */ + writel((addr << 8) | reg, priv->mdio_base + MDIO_ADDR_REG); + + /* Issue write data */ + writel(val, priv->mdio_base + MDIO_DATA_WRITE_REG); + + cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_WRITE; + + /* Issue write command */ + writel(cmd, priv->mdio_base + MDIO_CMD_REG); + + /* Wait for write complete */ + + if (ipq4019_mdio_wait_busy(priv)) + return -ETIMEDOUT; + + return 0; +} + +static const struct mdio_ops ipq4019_mdio_ops = { + .read = ipq4019_mdio_read, + .write = ipq4019_mdio_write, +}; + +static int ipq4019_mdio_bind(struct udevice *dev) +{ + if (ofnode_valid(dev->node)) + device_set_name(dev, ofnode_get_name(dev->node)); + + return 0; +} + +static int ipq4019_mdio_probe(struct udevice *dev) +{ + struct ipq4019_mdio_priv *priv = dev_get_priv(dev); + unsigned int data; + + priv->mdio_base = dev_read_addr(dev); + if (priv->mdio_base == FDT_ADDR_T_NONE) + return -EINVAL; + + /* Enter Clause 22 mode */ + data = readl(priv->mdio_base + MDIO_MODE_REG); + data &= ~MDIO_MODE_BIT; + writel(data, priv->mdio_base + MDIO_MODE_REG); + + return 0; +} + +static const struct udevice_id ipq4019_mdio_ids[] = { + { .compatible = "qcom,ipq4019-mdio", }, + { } +}; + +U_BOOT_DRIVER(ipq4019_mdio) = { + .name = "ipq4019_mdio", + .id = UCLASS_MDIO, + .of_match = ipq4019_mdio_ids, + .bind = ipq4019_mdio_bind, + .probe = ipq4019_mdio_probe, + .ops = &ipq4019_mdio_ops, + .priv_auto_alloc_size = sizeof(struct ipq4019_mdio_priv), +};