From: Patrice Chotard Date: Fri, 27 Oct 2023 14:43:03 +0000 (+0200) Subject: ARM: dts: stm32: Add STM32MP257F Evaluation board support X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=970d1673b016ae013839d7bcd69a17601b450304;p=u-boot.git ARM: dts: stm32: Add STM32MP257F Evaluation board support Add STM32MP257F Evaluation board support. It embeds a STM32MP257FAI SoC, with 4GB of DDR4, TSN switch (2+1 ports), 2*USB typeA, 1*USB2 typeC, SNOR OctoSPI, mini PCIe, STPMIC2 for power distribution ... Sync device tree with kernel v6.6-rc1. Signed-off-by: Patrice Chotard Reviewed-by: Patrick Delaunay --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 55aceb51cd..e0a0d430da 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1352,6 +1352,9 @@ dtb-$(CONFIG_STM32MP15x) += \ stm32mp15xx-dhcor-drc-compact.dtb \ stm32mp15xx-dhcor-testbench.dtb +dtb-$(CONFIG_STM32MP25X) += \ + stm32mp257f-ev1.dtb + dtb-$(CONFIG_SOC_K3_AM654) += \ k3-am654-base-board.dtb \ k3-am654-r5-base-board.dtb \ diff --git a/arch/arm/dts/stm32mp25-pinctrl.dtsi b/arch/arm/dts/stm32mp25-pinctrl.dtsi new file mode 100644 index 0000000000..d34a1d5e79 --- /dev/null +++ b/arch/arm/dts/stm32mp25-pinctrl.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ +#include + +&pinctrl { + usart2_pins_a: usart2-0 { + pins1 { + pinmux = ; /* USART2_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* USART2_RX */ + bias-disable; + }; + }; + + usart2_idle_pins_a: usart2-idle-0 { + pins1 { + pinmux = ; /* USART2_TX */ + }; + pins2 { + pinmux = ; /* USART2_RX */ + bias-disable; + }; + }; + + usart2_sleep_pins_a: usart2-sleep-0 { + pins { + pinmux = , /* USART2_TX */ + ; /* USART2_RX */ + }; + }; +}; diff --git a/arch/arm/dts/stm32mp25-u-boot.dtsi b/arch/arm/dts/stm32mp25-u-boot.dtsi new file mode 100644 index 0000000000..f4f26add2a --- /dev/null +++ b/arch/arm/dts/stm32mp25-u-boot.dtsi @@ -0,0 +1,102 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/* + * Copyright : STMicroelectronics 2023 + */ + +/ { + aliases { + gpio0 = &gpioa; + gpio1 = &gpiob; + gpio2 = &gpioc; + gpio3 = &gpiod; + gpio4 = &gpioe; + gpio5 = &gpiof; + gpio6 = &gpiog; + gpio7 = &gpioh; + gpio8 = &gpioi; + gpio9 = &gpioj; + gpio10 = &gpiok; + gpio25 = &gpioz; + pinctrl0 = &pinctrl; + pinctrl1 = &pinctrl_z; + }; + + firmware { + optee { + bootph-all; + }; + }; + + /* need PSCI for sysreset during board_f */ + psci { + bootph-all; + }; + + soc@0 { + bootph-all; + }; +}; + +&gpioa { + bootph-all; +}; + +&gpiob { + bootph-all; +}; + +&gpioc { + bootph-all; +}; + +&gpiod { + bootph-all; +}; + +&gpioe { + bootph-all; +}; + +&gpiof { + bootph-all; +}; + +&gpiog { + bootph-all; +}; + +&gpioh { + bootph-all; +}; + +&gpioi { + bootph-all; +}; + +&gpioj { + bootph-all; +}; + +&gpiok { + bootph-all; +}; + +&gpioz { + bootph-all; +}; + +&pinctrl { + bootph-all; +}; + +&rifsc { + bootph-all; +}; + +&scmi_clk { + bootph-all; +}; + +&syscfg { + bootph-all; +}; diff --git a/arch/arm/dts/stm32mp251.dtsi b/arch/arm/dts/stm32mp251.dtsi new file mode 100644 index 0000000000..cf2f28dc15 --- /dev/null +++ b/arch/arm/dts/stm32mp251.dtsi @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ +#include + +/ { + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a35"; + device_type = "cpu"; + reg = <0>; + enable-method = "psci"; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a35-pmu"; + interrupts = ; + interrupt-affinity = <&cpu0>; + interrupt-parent = <&intc>; + }; + + arm_wdt: watchdog { + compatible = "arm,smc-wdt"; + arm,smc-id = <0xb200005a>; + status = "disabled"; + }; + + clocks { + ck_flexgen_08: ck-flexgen-08 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + }; + + ck_flexgen_51: ck-flexgen-51 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; + + ck_icn_ls_mcu: ck-icn-ls-mcu { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + scmi { + compatible = "linaro,scmi-optee"; + #address-cells = <1>; + #size-cells = <0>; + linaro,optee-channel-id = <0>; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; + }; + }; + + intc: interrupt-controller@4ac00000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x0 0x4ac10000 0x0 0x1000>, + <0x0 0x4ac20000 0x0 0x2000>, + <0x0 0x4ac40000 0x0 0x2000>, + <0x0 0x4ac60000 0x0 0x2000>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&intc>; + interrupts = , + , + , + ; + always-on; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges = <0x0 0x0 0x0 0x80000000>; + + rifsc: rifsc-bus@42080000 { + compatible = "simple-bus"; + reg = <0x42080000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usart2: serial@400e0000 { + compatible = "st,stm32h7-uart"; + reg = <0x400e0000 0x400>; + interrupts = ; + clocks = <&ck_flexgen_08>; + status = "disabled"; + }; + }; + + syscfg: syscon@44230000 { + compatible = "st,stm32mp25-syscfg", "syscon"; + reg = <0x44230000 0x10000>; + }; + + pinctrl: pinctrl@44240000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp257-pinctrl"; + ranges = <0 0x44240000 0xa0400>; + pins-are-numbered; + + gpioa: gpio@44240000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOA"; + status = "disabled"; + }; + + gpiob: gpio@44250000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x10000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOB"; + status = "disabled"; + }; + + gpioc: gpio@44260000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x20000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOC"; + status = "disabled"; + }; + + gpiod: gpio@44270000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x30000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOD"; + status = "disabled"; + }; + + gpioe: gpio@44280000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x40000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOE"; + status = "disabled"; + }; + + gpiof: gpio@44290000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x50000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOF"; + status = "disabled"; + }; + + gpiog: gpio@442a0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x60000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOG"; + status = "disabled"; + }; + + gpioh: gpio@442b0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x70000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOH"; + status = "disabled"; + }; + + gpioi: gpio@442c0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x80000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOI"; + status = "disabled"; + }; + + gpioj: gpio@442d0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x90000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOJ"; + status = "disabled"; + }; + + gpiok: gpio@442e0000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xa0000 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOK"; + status = "disabled"; + }; + }; + + pinctrl_z: pinctrl@46200000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp257-z-pinctrl"; + ranges = <0 0x46200000 0x400>; + pins-are-numbered; + + gpioz: gpio@46200000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x400>; + clocks = <&ck_icn_ls_mcu>; + st,bank-name = "GPIOZ"; + st,bank-ioport = <11>; + status = "disabled"; + }; + + }; + }; +}; diff --git a/arch/arm/dts/stm32mp253.dtsi b/arch/arm/dts/stm32mp253.dtsi new file mode 100644 index 0000000000..af48e82efe --- /dev/null +++ b/arch/arm/dts/stm32mp253.dtsi @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ +#include "stm32mp251.dtsi" + +/ { + cpus { + cpu1: cpu@1 { + compatible = "arm,cortex-a35"; + device_type = "cpu"; + reg = <1>; + enable-method = "psci"; + }; + }; + + arm-pmu { + interrupts = , + ; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; +}; diff --git a/arch/arm/dts/stm32mp255.dtsi b/arch/arm/dts/stm32mp255.dtsi new file mode 100644 index 0000000000..e6fa596211 --- /dev/null +++ b/arch/arm/dts/stm32mp255.dtsi @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ +#include "stm32mp253.dtsi" + +/ { +}; diff --git a/arch/arm/dts/stm32mp257.dtsi b/arch/arm/dts/stm32mp257.dtsi new file mode 100644 index 0000000000..5c5000d3d9 --- /dev/null +++ b/arch/arm/dts/stm32mp257.dtsi @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ +#include "stm32mp255.dtsi" + +/ { +}; diff --git a/arch/arm/dts/stm32mp257f-ev1-u-boot.dtsi b/arch/arm/dts/stm32mp257f-ev1-u-boot.dtsi new file mode 100644 index 0000000000..a35a9b9038 --- /dev/null +++ b/arch/arm/dts/stm32mp257f-ev1-u-boot.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + */ + +#include "stm32mp25-u-boot.dtsi" + +&usart2 { + bootph-all; +}; + +&usart2_pins_a { + bootph-all; + pins1 { + bootph-all; + }; + pins2 { + bootph-all; + }; +}; diff --git a/arch/arm/dts/stm32mp257f-ev1.dts b/arch/arm/dts/stm32mp257f-ev1.dts new file mode 100644 index 0000000000..a88494eed3 --- /dev/null +++ b/arch/arm/dts/stm32mp257f-ev1.dts @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp257.dtsi" +#include "stm32mp25xf.dtsi" +#include "stm32mp25-pinctrl.dtsi" +#include "stm32mp25xxai-pinctrl.dtsi" + +/ { + model = "STMicroelectronics STM32MP257F-EV1 Evaluation Board"; + compatible = "st,stm32mp257f-ev1", "st,stm32mp257"; + + aliases { + serial0 = &usart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x1 0x0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + fw@80000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x80000000 0x0 0x4000000>; + no-map; + }; + }; +}; + +&arm_wdt { + timeout-sec = <32>; + status = "okay"; +}; + +&usart2 { + pinctrl-names = "default", "idle", "sleep"; + pinctrl-0 = <&usart2_pins_a>; + pinctrl-1 = <&usart2_idle_pins_a>; + pinctrl-2 = <&usart2_sleep_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/dts/stm32mp25xc.dtsi b/arch/arm/dts/stm32mp25xc.dtsi new file mode 100644 index 0000000000..5e83a69264 --- /dev/null +++ b/arch/arm/dts/stm32mp25xc.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +/ { +}; diff --git a/arch/arm/dts/stm32mp25xf.dtsi b/arch/arm/dts/stm32mp25xf.dtsi new file mode 100644 index 0000000000..5e83a69264 --- /dev/null +++ b/arch/arm/dts/stm32mp25xf.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +/ { +}; diff --git a/arch/arm/dts/stm32mp25xxai-pinctrl.dtsi b/arch/arm/dts/stm32mp25xxai-pinctrl.dtsi new file mode 100644 index 0000000000..abdbc7aebc --- /dev/null +++ b/arch/arm/dts/stm32mp25xxai-pinctrl.dtsi @@ -0,0 +1,83 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +&pinctrl { + st,package = ; + + gpioa: gpio@44240000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@44250000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@44260000 { + status = "okay"; + ngpios = <14>; + gpio-ranges = <&pinctrl 0 32 14>; + }; + + gpiod: gpio@44270000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@44280000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@44290000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@442a0000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@442b0000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 2 114 12>; + }; + + gpioi: gpio@442c0000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@442d0000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@442e0000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + }; +}; + +&pinctrl_z { + gpioz: gpio@46200000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl_z 0 400 10>; + }; +}; diff --git a/arch/arm/dts/stm32mp25xxak-pinctrl.dtsi b/arch/arm/dts/stm32mp25xxak-pinctrl.dtsi new file mode 100644 index 0000000000..2e0d4d349d --- /dev/null +++ b/arch/arm/dts/stm32mp25xxak-pinctrl.dtsi @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +&pinctrl { + st,package = ; + + gpioa: gpio@44240000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@44250000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@44260000 { + status = "okay"; + ngpios = <14>; + gpio-ranges = <&pinctrl 0 32 14>; + }; + + gpiod: gpio@44270000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@44280000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@44290000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@442a0000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@442b0000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 2 114 12>; + }; + + gpioi: gpio@442c0000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 0 128 12>; + }; +}; + +&pinctrl_z { + gpioz: gpio@46200000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl_z 0 400 10>; + }; +}; diff --git a/arch/arm/dts/stm32mp25xxal-pinctrl.dtsi b/arch/arm/dts/stm32mp25xxal-pinctrl.dtsi new file mode 100644 index 0000000000..2406e97255 --- /dev/null +++ b/arch/arm/dts/stm32mp25xxal-pinctrl.dtsi @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2023 - All Rights Reserved + * Author: Alexandre Torgue for STMicroelectronics. + */ + +&pinctrl { + st,package = ; + + gpioa: gpio@44240000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@44250000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@44260000 { + status = "okay"; + ngpios = <14>; + gpio-ranges = <&pinctrl 0 32 14>; + }; + + gpiod: gpio@44270000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@44280000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@44290000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@442a0000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@442b0000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 2 114 12>; + }; + + gpioi: gpio@442c0000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 0 128 12>; + }; +}; + +&pinctrl_z { + gpioz: gpio@46200000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl_z 0 400 10>; + }; +}; diff --git a/include/dt-bindings/pinctrl/stm32-pinfunc.h b/include/dt-bindings/pinctrl/stm32-pinfunc.h index e6fb8ada3f..28ad023508 100644 --- a/include/dt-bindings/pinctrl/stm32-pinfunc.h +++ b/include/dt-bindings/pinctrl/stm32-pinfunc.h @@ -37,6 +37,9 @@ #define STM32MP_PKG_AB 0x2 #define STM32MP_PKG_AC 0x4 #define STM32MP_PKG_AD 0x8 +#define STM32MP_PKG_AI 0x100 +#define STM32MP_PKG_AK 0x400 +#define STM32MP_PKG_AL 0x800 #endif /* _DT_BINDINGS_STM32_PINFUNC_H */