From: Heiko Stuebner <heiko@sntech.de>
Date: Mon, 28 Oct 2024 19:00:22 +0000 (+0100)
Subject: arm64: dts: rockchip: enable sata1+2 on Qnap-TS433
X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=949560e61a70071b83a702f2741ca8a6b29869c5;p=u-boot.git

arm64: dts: rockchip: enable sata1+2 on Qnap-TS433

The TS433 has 4 bays. The last two are accessed via a pci-connected
sata controller, while the first two are accessed via the rk3568's
sata controllers. Enable these two now.

Tested-by: Uwe Kleine-König <ukleinek@debian.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240723195538.1133436-7-heiko@sntech.de

[ upstream commit: 673c1353b3d476b9c5df6b84a777ed171e5594f5 ]

(cherry picked from commit dfa45bbda057851d0c2167b4c311c0301637cc19)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---

diff --git a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
index be1c2286c2..40af4dd0e4 100644
--- a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
+++ b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts
@@ -80,6 +80,16 @@
 	status = "okay";
 };
 
+/* connected to sata1 */
+&combphy1 {
+	status = "okay";
+};
+
+/* connected to sata2 */
+&combphy2 {
+	status = "okay";
+};
+
 &gmac0 {
 	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
 	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
@@ -156,6 +166,14 @@
 	};
 };
 
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
 &sdhci {
 	bus-width = <8>;
 	max-frequency = <200000000>;