From: Tom Rini Date: Sun, 4 Dec 2022 15:14:20 +0000 (-0500) Subject: common/spl/spl_ram: Remove unused default X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=90c7888c9d6b3223c32f068668f3bc5a81010f8e;p=u-boot.git common/spl/spl_ram: Remove unused default We ask for CONFIG_SPL_LOAD_FIT_ADDRESS in Kconfig, so we cannot define it in C as a fall-back. However, this option previously was buried under "if ... endif" Kconfig logic. Rework a number of config options to now have more robust dependency lines so that we can ask this address when needed. With that done, we can remove the fallback in spl_ram.c. Signed-off-by: Tom Rini --- diff --git a/boot/Kconfig b/boot/Kconfig index 668270cc66..65613a0149 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -36,10 +36,9 @@ config TIMESTAMP loaded that does not, the message 'Wrong FIT format: no timestamp' is shown. -if FIT - config FIT_EXTERNAL_OFFSET hex "FIT external data offset" + depends on FIT default 0x0 help This specifies a data offset in fit image. @@ -50,6 +49,7 @@ config FIT_EXTERNAL_OFFSET config FIT_FULL_CHECK bool "Do a full check of the FIT before using it" + depends on FIT default y help Enable this do a full check of the FIT to make sure it is valid. This @@ -59,7 +59,7 @@ config FIT_FULL_CHECK config FIT_SIGNATURE bool "Enable signature verification of FIT uImages" - depends on DM + depends on DM && FIT select HASH imply RSA imply RSA_VERIFY @@ -97,7 +97,7 @@ config FIT_RSASSA_PSS config FIT_CIPHER bool "Enable ciphering data in a FIT uImages" - depends on DM + depends on DM && FIT select AES help Enable the feature of data ciphering/unciphering in the tool mkimage @@ -105,6 +105,7 @@ config FIT_CIPHER config FIT_VERBOSE bool "Show verbose messages when FIT images fail" + depends on FIT help Generally a system will have valid FIT images so debug messages are a waste of code space. If you are debugging your images then @@ -113,6 +114,7 @@ config FIT_VERBOSE config FIT_BEST_MATCH bool "Select the best match for the kernel device tree" + depends on FIT help When no configuration is explicitly selected, default to the one whose fdt's compatibility field best matches that of @@ -122,6 +124,7 @@ config FIT_BEST_MATCH config FIT_IMAGE_POST_PROCESS bool "Enable post-processing of FIT artifacts after loading by U-Boot" + depends on FIT depends on TI_SECURE_DEVICE || SOCFPGA_SECURE_VAB_AUTH default y if TI_SECURE_DEVICE help @@ -137,15 +140,14 @@ config FIT_IMAGE_POST_PROCESS config FIT_PRINT bool "Support FIT printing" + depends on FIT default y help Support printing the content of the fitImage in a verbose manner. -if SPL - config SPL_FIT bool "Support Flattened Image Tree within SPL" - depends on SPL + depends on SPL && FIT select SPL_HASH select SPL_OF_LIBFDT @@ -157,13 +159,13 @@ config SPL_FIT_PRINT config SPL_FIT_FULL_CHECK bool "Do a full check of the FIT before using it" + depends on SPL_FIT help Enable this do a full check of the FIT to make sure it is valid. This helps to protect against carefully crafted FITs which take advantage of bugs or omissions in the code. This includes a bad structure, multiple root nodes and the like. - config SPL_FIT_SIGNATURE bool "Enable signature verification of FIT firmware within SPL" depends on SPL_DM @@ -196,6 +198,7 @@ config SPL_FIT_RSASSA_PSS config SPL_LOAD_FIT bool "Enable SPL loading U-Boot as a FIT (basic fitImage features)" + depends on SPL && FIT select SPL_FIT help Normally with the SPL framework a legacy image is generated as part @@ -217,7 +220,7 @@ config SPL_LOAD_FIT config SPL_LOAD_FIT_ADDRESS hex "load address of fit image" - depends on SPL_LOAD_FIT + depends on SPL_LOAD_FIT || SPL_RAM_SUPPORT || TPL_RAM_SUPPORT default 0x0 help Specify the load address of the fit image that will be loaded @@ -243,6 +246,7 @@ config SPL_LOAD_FIT_APPLY_OVERLAY_BUF_SZ config SPL_LOAD_FIT_FULL bool "Enable SPL loading U-Boot as a FIT (full fitImage features)" + depends on FIT select SPL_FIT help Normally with the SPL framework a legacy image is generated as part @@ -277,7 +281,8 @@ config SPL_FIT_SOURCE config USE_SPL_FIT_GENERATOR bool "Use a script to generate the .its script" - default y if SPL_FIT && (!ARCH_SUNXI && !RISCV) + depends on SPL_FIT + default y if !ARCH_SUNXI && !RISCV config SPL_FIT_GENERATOR string ".its file generator script for U-Boot FIT image" @@ -290,8 +295,6 @@ config SPL_FIT_GENERATOR passed a list of supported device tree file stub names to include in the generated image. -endif # SPL - if VPL config VPL_FIT @@ -342,8 +345,6 @@ config VPL_FIT_SIGNATURE_MAX_SIZE endif # VPL -endif # FIT - config PXE_UTILS bool select MENU diff --git a/common/spl/spl_ram.c b/common/spl/spl_ram.c index 2b1ac19152..5753bd228f 100644 --- a/common/spl/spl_ram.c +++ b/common/spl/spl_ram.c @@ -17,10 +17,6 @@ #include #include -#ifndef CONFIG_SPL_LOAD_FIT_ADDRESS -# define CONFIG_SPL_LOAD_FIT_ADDRESS 0 -#endif - static ulong spl_ram_load_read(struct spl_load_info *load, ulong sector, ulong count, void *buf) {