From: Jonas Karlman Date: Sat, 2 Mar 2024 19:16:15 +0000 (+0000) Subject: rockchip: Use common bss and stack addresses on RK356x X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=8a94c376f6cb3fa2efe3077491412ac6749e5585;p=u-boot.git rockchip: Use common bss and stack addresses on RK356x Currently the following memory layout is typically used on RK356x: [ 0, 256K) - SPL binary [ 256K, 2M) - TF-A / reserved [ -X, 4M) - SPL pre-reloc stack (SPL_STACK) [-128K, 4M) - pre-reloc malloc heap (SPL_SYS_MALLOC_F_LEN) [ -X, 6M) - SPL reloc stack (SPL_STACK_R_ADDR) [ 5M, 6M) - reloc malloc heap (SPL_STACK_R_MALLOC_SIMPLE_LEN) [ 10M, +X) - U-Boot proper binary (TEXT_BASE) [ -X, 12M) - U-Boot proper pre-reloc stack (CUSTOM_SYS_INIT_SP_ADDR) [-128K, 12M) - pre-reloc malloc heap (SYS_MALLOC_F_LEN) [ 64M, +16K) - SPL bss (SPL_BSS_START_ADDR, SPL_BSS_MAX_SIZE) SPL can safely load U-Boot proper + FDT to [10M, 12M-128K) with this layout. Migrate to use common bss, stack and malloc heap size and addresses to remove this size limitation. Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang (Update for pinetab2-rk3566_defconfig) Signed-off-by: Kever Yang --- diff --git a/arch/arm/mach-rockchip/rk3568/Kconfig b/arch/arm/mach-rockchip/rk3568/Kconfig index baa51349f4..af537d912a 100644 --- a/arch/arm/mach-rockchip/rk3568/Kconfig +++ b/arch/arm/mach-rockchip/rk3568/Kconfig @@ -38,8 +38,11 @@ config ROCKCHIP_STIMER_BASE config SYS_SOC default "rk3568" -config SYS_MALLOC_F_LEN - default 0x20000 +config ROCKCHIP_COMMON_STACK_ADDR + default y + +config TEXT_BASE + default 0x00a00000 source "board/rockchip/evb_rk3568/Kconfig" source "board/anbernic/rgxx3_rk3566/Kconfig" diff --git a/configs/anbernic-rgxx3-rk3566_defconfig b/configs/anbernic-rgxx3-rk3566_defconfig index ed6643d9d4..2b484fcaef 100644 --- a/configs/anbernic-rgxx3-rk3566_defconfig +++ b/configs/anbernic-rgxx3-rk3566_defconfig @@ -2,22 +2,14 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00a00000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 CONFIG_DEFAULT_DEVICE_TREE="rk3566-anbernic-rgxx3" CONFIG_ROCKCHIP_RK3568=y CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y -CONFIG_SPL_STACK_R_ADDR=0x600000 CONFIG_TARGET_ANBERNIC_RGXX3_RK3566=y -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 @@ -34,13 +26,8 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_RNG_SEED=y CONFIG_SPL_MAX_SIZE=0x20000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y CONFIG_SPL_ATF=y CONFIG_CMD_PWM=y CONFIG_CMD_GPT=y diff --git a/configs/bpi-r2-pro-rk3568_defconfig b/configs/bpi-r2-pro-rk3568_defconfig index e6e0e6fc6f..5cc95241ba 100644 --- a/configs/bpi-r2-pro-rk3568_defconfig +++ b/configs/bpi-r2-pro-rk3568_defconfig @@ -2,18 +2,10 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00a00000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 CONFIG_DEFAULT_DEVICE_TREE="rk3568-bpi-r2-pro" CONFIG_ROCKCHIP_RK3568=y -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y CONFIG_SPL_SERIAL=y -CONFIG_SPL_STACK_R_ADDR=0x600000 -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 @@ -30,12 +22,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-bpi-r2-pro.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y CONFIG_SPL_ATF=y CONFIG_SYS_PROMPT="BPI-R2PRO> " CONFIG_CMD_GPIO=y diff --git a/configs/evb-rk3568_defconfig b/configs/evb-rk3568_defconfig index cb9b87ff12..6e8061f5f4 100644 --- a/configs/evb-rk3568_defconfig +++ b/configs/evb-rk3568_defconfig @@ -2,18 +2,10 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00a00000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 CONFIG_DEFAULT_DEVICE_TREE="rk3568-evb" CONFIG_ROCKCHIP_RK3568=y -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y CONFIG_SPL_SERIAL=y -CONFIG_SPL_STACK_R_ADDR=0x600000 -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 @@ -28,12 +20,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-evb.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y CONFIG_SPL_ATF=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y diff --git a/configs/generic-rk3568_defconfig b/configs/generic-rk3568_defconfig index 8fb79c9b44..e7d5e55bbf 100644 --- a/configs/generic-rk3568_defconfig +++ b/configs/generic-rk3568_defconfig @@ -2,18 +2,10 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00a00000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 CONFIG_DEFAULT_DEVICE_TREE="rk3568-generic" CONFIG_ROCKCHIP_RK3568=y -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y CONFIG_SPL_SERIAL=y -CONFIG_SPL_STACK_R_ADDR=0x600000 -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 @@ -28,12 +20,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-generic.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y CONFIG_SPL_ATF=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y diff --git a/configs/lubancat-2-rk3568_defconfig b/configs/lubancat-2-rk3568_defconfig index 80ae6ec3a2..1c50a0ccbe 100644 --- a/configs/lubancat-2-rk3568_defconfig +++ b/configs/lubancat-2-rk3568_defconfig @@ -2,18 +2,10 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00a00000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 CONFIG_DEFAULT_DEVICE_TREE="rk3568-lubancat-2" CONFIG_ROCKCHIP_RK3568=y -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y CONFIG_SPL_SERIAL=y -CONFIG_SPL_STACK_R_ADDR=0x600000 -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 @@ -28,12 +20,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-lubancat-2.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y CONFIG_SPL_ATF=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y diff --git a/configs/nanopi-r5c-rk3568_defconfig b/configs/nanopi-r5c-rk3568_defconfig index f5a472d03d..0f1a9461a0 100644 --- a/configs/nanopi-r5c-rk3568_defconfig +++ b/configs/nanopi-r5c-rk3568_defconfig @@ -3,18 +3,10 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_HAS_NONCACHED_MEMORY=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00a00000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 CONFIG_DEFAULT_DEVICE_TREE="rk3568-nanopi-r5c" CONFIG_ROCKCHIP_RK3568=y -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y CONFIG_SPL_SERIAL=y -CONFIG_SPL_STACK_R_ADDR=0x600000 -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 @@ -30,12 +22,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-nanopi-r5c.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y CONFIG_SPL_ATF=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y diff --git a/configs/nanopi-r5s-rk3568_defconfig b/configs/nanopi-r5s-rk3568_defconfig index 99692d341f..4ebf0cc9ee 100644 --- a/configs/nanopi-r5s-rk3568_defconfig +++ b/configs/nanopi-r5s-rk3568_defconfig @@ -3,18 +3,10 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_HAS_NONCACHED_MEMORY=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00a00000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 CONFIG_DEFAULT_DEVICE_TREE="rk3568-nanopi-r5s" CONFIG_ROCKCHIP_RK3568=y -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y CONFIG_SPL_SERIAL=y -CONFIG_SPL_STACK_R_ADDR=0x600000 -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 @@ -30,12 +22,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-nanopi-r5s.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y CONFIG_SPL_ATF=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y diff --git a/configs/odroid-m1-rk3568_defconfig b/configs/odroid-m1-rk3568_defconfig index 3130e341e7..b5ed9e4bc9 100644 --- a/configs/odroid-m1-rk3568_defconfig +++ b/configs/odroid-m1-rk3568_defconfig @@ -2,22 +2,14 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00a00000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 CONFIG_SF_DEFAULT_SPEED=24000000 CONFIG_SF_DEFAULT_MODE=0x1000 CONFIG_DEFAULT_DEVICE_TREE="rk3568-odroid-m1" CONFIG_ROCKCHIP_RK3568=y -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y CONFIG_ROCKCHIP_SPI_IMAGE=y CONFIG_SPL_SERIAL=y -CONFIG_SPL_STACK_R_ADDR=0x600000 CONFIG_TARGET_ODROID_M1_RK3568=y -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SPL_SPI_FLASH_SUPPORT=y @@ -36,12 +28,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-odroid-m1.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 CONFIG_SPL_ATF=y diff --git a/configs/pinetab2-rk3566_defconfig b/configs/pinetab2-rk3566_defconfig index 19b396eef9..bc7a77aa52 100644 --- a/configs/pinetab2-rk3566_defconfig +++ b/configs/pinetab2-rk3566_defconfig @@ -2,24 +2,15 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00a00000 CONFIG_SPL_GPIO=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 -CONFIG_SF_DEFAULT_SPEED=24000000 CONFIG_SF_DEFAULT_MODE=0x1000 CONFIG_DEFAULT_DEVICE_TREE="rk3566-pinetab2-v2.0" CONFIG_ROCKCHIP_RK3568=y -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y CONFIG_ROCKCHIP_SPI_IMAGE=y CONFIG_SPL_SERIAL=y -CONFIG_SPL_STACK_R_ADDR=0x600000 CONFIG_TARGET_QUARTZ64_RK3566=y -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SPL_SPI_FLASH_SUPPORT=y @@ -36,12 +27,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-pinetab2-v2.0.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_SPI_LOAD=y diff --git a/configs/quartz64-a-rk3566_defconfig b/configs/quartz64-a-rk3566_defconfig index ade08867f6..fef80439d8 100644 --- a/configs/quartz64-a-rk3566_defconfig +++ b/configs/quartz64-a-rk3566_defconfig @@ -2,23 +2,15 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00a00000 CONFIG_SPL_GPIO=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 CONFIG_SF_DEFAULT_SPEED=24000000 CONFIG_SF_DEFAULT_MODE=0x2000 CONFIG_DEFAULT_DEVICE_TREE="rk3566-quartz64-a" CONFIG_ROCKCHIP_RK3568=y -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y CONFIG_ROCKCHIP_SPI_IMAGE=y CONFIG_SPL_SERIAL=y -CONFIG_SPL_STACK_R_ADDR=0x600000 CONFIG_TARGET_QUARTZ64_RK3566=y -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SPL_SPI_FLASH_SUPPORT=y @@ -37,12 +29,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-quartz64-a.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y CONFIG_SPL_POWER=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 diff --git a/configs/quartz64-b-rk3566_defconfig b/configs/quartz64-b-rk3566_defconfig index 8d01db5440..bb541ed1af 100644 --- a/configs/quartz64-b-rk3566_defconfig +++ b/configs/quartz64-b-rk3566_defconfig @@ -2,22 +2,14 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00a00000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 CONFIG_SF_DEFAULT_SPEED=24000000 CONFIG_SF_DEFAULT_MODE=0x2000 CONFIG_DEFAULT_DEVICE_TREE="rk3566-quartz64-b" CONFIG_ROCKCHIP_RK3568=y -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y CONFIG_ROCKCHIP_SPI_IMAGE=y CONFIG_SPL_SERIAL=y -CONFIG_SPL_STACK_R_ADDR=0x600000 CONFIG_TARGET_QUARTZ64_RK3566=y -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SPL_SPI_FLASH_SUPPORT=y @@ -36,12 +28,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-quartz64-b.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 CONFIG_SPL_ATF=y diff --git a/configs/radxa-cm3-io-rk3566_defconfig b/configs/radxa-cm3-io-rk3566_defconfig index 4b606dcb8e..bf61db44d3 100644 --- a/configs/radxa-cm3-io-rk3566_defconfig +++ b/configs/radxa-cm3-io-rk3566_defconfig @@ -2,18 +2,10 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00a00000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 CONFIG_DEFAULT_DEVICE_TREE="rk3566-radxa-cm3-io" CONFIG_ROCKCHIP_RK3568=y -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y CONFIG_SPL_SERIAL=y -CONFIG_SPL_STACK_R_ADDR=0x600000 -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 @@ -28,12 +20,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-radxa-cm3-io.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y CONFIG_SPL_ATF=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y diff --git a/configs/radxa-e25-rk3568_defconfig b/configs/radxa-e25-rk3568_defconfig index fedb137877..43aa8ec20e 100644 --- a/configs/radxa-e25-rk3568_defconfig +++ b/configs/radxa-e25-rk3568_defconfig @@ -3,18 +3,10 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_HAS_NONCACHED_MEMORY=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00a00000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 CONFIG_DEFAULT_DEVICE_TREE="rk3568-radxa-e25" CONFIG_ROCKCHIP_RK3568=y -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y CONFIG_SPL_SERIAL=y -CONFIG_SPL_STACK_R_ADDR=0x600000 -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 @@ -31,12 +23,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-radxa-e25.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y CONFIG_SPL_ATF=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y diff --git a/configs/rock-3a-rk3568_defconfig b/configs/rock-3a-rk3568_defconfig index 18372a570e..c161bc974f 100644 --- a/configs/rock-3a-rk3568_defconfig +++ b/configs/rock-3a-rk3568_defconfig @@ -2,21 +2,13 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00a00000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 CONFIG_SF_DEFAULT_SPEED=24000000 CONFIG_SF_DEFAULT_MODE=0x2000 CONFIG_DEFAULT_DEVICE_TREE="rk3568-rock-3a" CONFIG_ROCKCHIP_RK3568=y -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y CONFIG_ROCKCHIP_SPI_IMAGE=y CONFIG_SPL_SERIAL=y -CONFIG_SPL_STACK_R_ADDR=0x600000 -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SPL_SPI_FLASH_SUPPORT=y @@ -35,12 +27,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-rock-3a.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 CONFIG_SPL_ATF=y diff --git a/configs/soquartz-blade-rk3566_defconfig b/configs/soquartz-blade-rk3566_defconfig index 9693cc2f9e..b9ac6b9f33 100644 --- a/configs/soquartz-blade-rk3566_defconfig +++ b/configs/soquartz-blade-rk3566_defconfig @@ -2,19 +2,11 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00a00000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 CONFIG_DEFAULT_DEVICE_TREE="rk3566-soquartz-blade" CONFIG_ROCKCHIP_RK3568=y -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y CONFIG_SPL_SERIAL=y -CONFIG_SPL_STACK_R_ADDR=0x600000 CONFIG_TARGET_QUARTZ64_RK3566=y -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 @@ -31,12 +23,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-soquartz-blade.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y CONFIG_SPL_ATF=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y diff --git a/configs/soquartz-cm4-rk3566_defconfig b/configs/soquartz-cm4-rk3566_defconfig index 9c6b12d230..e87a6392c5 100644 --- a/configs/soquartz-cm4-rk3566_defconfig +++ b/configs/soquartz-cm4-rk3566_defconfig @@ -2,19 +2,11 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00a00000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 CONFIG_DEFAULT_DEVICE_TREE="rk3566-soquartz-cm4" CONFIG_ROCKCHIP_RK3568=y -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y CONFIG_SPL_SERIAL=y -CONFIG_SPL_STACK_R_ADDR=0x600000 CONFIG_TARGET_QUARTZ64_RK3566=y -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 @@ -31,12 +23,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-soquartz-cm4.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y CONFIG_SPL_ATF=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y diff --git a/configs/soquartz-model-a-rk3566_defconfig b/configs/soquartz-model-a-rk3566_defconfig index fd72d78a47..b2c1684515 100644 --- a/configs/soquartz-model-a-rk3566_defconfig +++ b/configs/soquartz-model-a-rk3566_defconfig @@ -2,19 +2,11 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00a00000 -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 CONFIG_DEFAULT_DEVICE_TREE="rk3566-soquartz-model-a" CONFIG_ROCKCHIP_RK3568=y -CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y CONFIG_SPL_SERIAL=y -CONFIG_SPL_STACK_R_ADDR=0x600000 CONFIG_TARGET_QUARTZ64_RK3566=y -CONFIG_SPL_STACK=0x400000 CONFIG_DEBUG_UART_BASE=0xFE660000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_SYS_LOAD_ADDR=0xc00800 @@ -31,12 +23,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-soquartz-model-a.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x4000000 -CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK_R=y CONFIG_SPL_ATF=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y