From: Peng Fan Date: Wed, 15 Jun 2016 06:18:37 +0000 (+0800) Subject: imx6ulevk: fix 74LV OE usage X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=85801579e10208b7466f4a7f8329b4f5d2056fff;p=u-boot.git imx6ulevk: fix 74LV OE usage Fix 74LV OE gpio index. gpio index is wrong, so gpio output will not have effect, since we use wrong GPIO5_IO18, but not correct GPIO5_IO8. And at the end of the initialization of 74lv init, should keep OE voltage level at LOW to make 74lv output the correct voltage. Signed-off-by: Peng Fan Cc: Stefano Babic Cc: Fabio Estevam Reviewed-by: Fabio Estevam --- diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index 88d3fbd9b1..b861122730 100644 --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c @@ -66,7 +66,7 @@ DECLARE_GLOBAL_DATA_PTR; #define IOX_SDI IMX_GPIO_NR(5, 10) #define IOX_STCP IMX_GPIO_NR(5, 7) #define IOX_SHCP IMX_GPIO_NR(5, 11) -#define IOX_OE IMX_GPIO_NR(5, 18) +#define IOX_OE IMX_GPIO_NR(5, 8) static iomux_v3_cfg_t const iox_pads[] = { /* IOX_SDI */ @@ -154,8 +154,6 @@ static void iox74lv_init(void) * shift register will be output to pins */ gpio_direction_output(IOX_STCP, 1); - - gpio_direction_output(IOX_OE, 1); }; #ifdef CONFIG_SYS_I2C_MXC