From: Michal Simek <michal.simek@xilinx.com>
Date: Fri, 9 Sep 2016 06:46:39 +0000 (+0200)
Subject: ARM64: zynqmp: Add dcc port to dtsi
X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=69d09dd74de58c541160904d91e3777b5c795dae;p=u-boot.git

ARM64: zynqmp: Add dcc port to dtsi

Add dcc to dtsi for supporting system without serial port.
DCC is enabled by default on ZynqMP.
Adding dcc to zcu100 and zcu102 which were tested.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/arch/arm/dts/zynqmp-zcu102.dts b/arch/arm/dts/zynqmp-zcu102.dts
index 770d98766c..e7496da235 100644
--- a/arch/arm/dts/zynqmp-zcu102.dts
+++ b/arch/arm/dts/zynqmp-zcu102.dts
@@ -27,6 +27,7 @@
 		rtc0 = &rtc;
 		serial0 = &uart0;
 		serial1 = &uart1;
+		serial2 = &dcc;
 		spi0 = &qspi;
 		usb0 = &usb0;
 	};
@@ -69,6 +70,10 @@
 	status = "okay";
 };
 
+&dcc {
+	status = "okay";
+};
+
 /* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
 	status = "okay";
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index ac17c4723a..f3f4f88cec 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -45,6 +45,12 @@
 		};
 	};
 
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "disabled";
+		u-boot,dm-pre-reloc;
+	};
+
 	power-domains {
 		compatible = "xlnx,zynqmp-genpd";