From: Joe Hershberger <joe.hershberger@ni.com>
Date: Fri, 8 Feb 2013 20:18:53 +0000 (-0600)
Subject: net: Correct check for link-local target IP conflict
X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=5da7cf81c8d76c7b5ddf5225224141eae4e706be;p=u-boot.git

net: Correct check for link-local target IP conflict

Make the link-local code conform more completely with the RFC.

This will prevent ARP queries for the target (such as while it is
rebooting) from causing the device to choose a different link-local
address, thinking that its address is in use by another machine.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
---

diff --git a/net/link_local.c b/net/link_local.c
index 1ba796ebdf..4152fae5ba 100644
--- a/net/link_local.c
+++ b/net/link_local.c
@@ -206,6 +206,7 @@ void link_local_receive_arp(struct arp_hdr *arp, int len)
 {
 	int source_ip_conflict;
 	int target_ip_conflict;
+	IPaddr_t null_ip = 0;
 
 	if (state == DISABLED)
 		return;
@@ -267,10 +268,18 @@ void link_local_receive_arp(struct arp_hdr *arp, int len)
 	) {
 		source_ip_conflict = 1;
 	}
-	if (arp->ar_op == htons(ARPOP_REQUEST)
-	 && memcmp(&arp->ar_tpa, &ip, ARP_PLEN) == 0
-	 && memcmp(&arp->ar_tha, NetOurEther, ARP_HLEN) != 0
-	) {
+
+	/*
+	 * According to RFC 3927, section 2.2.1:
+	 * Check if packet is an ARP probe by checking for a null source IP
+	 * then check that target IP is equal to ours and source hw addr
+	 * is not equal to ours. This condition should cause a conflict only
+	 * during probe.
+	 */
+	if (arp->ar_op == htons(ARPOP_REQUEST) &&
+	    memcmp(&arp->ar_spa, &null_ip, ARP_PLEN) == 0 &&
+	    memcmp(&arp->ar_tpa, &ip, ARP_PLEN) == 0 &&
+	    memcmp(&arp->ar_sha, NetOurEther, ARP_HLEN) != 0) {
 		target_ip_conflict = 1;
 	}