From: Bryan Brattlof Date: Fri, 29 Dec 2023 17:47:01 +0000 (-0600) Subject: arm: dts: k3-am654: pull in dtb update from Linux X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=4dbdc84754ea2ad392ef7328da6d429cd8fd3c0a;p=u-boot.git arm: dts: k3-am654: pull in dtb update from Linux Pull in dtb updates for the am654 base board from v6.7-rc1 of Linux Tested-by: Tom Rini Signed-off-by: Bryan Brattlof Reviewed-by: Nishanth Menon --- diff --git a/arch/arm/dts/k3-am65-main.dtsi b/arch/arm/dts/k3-am65-main.dtsi index ba4e5d3e1e..5ebb87f467 100644 --- a/arch/arm/dts/k3-am65-main.dtsi +++ b/arch/arm/dts/k3-am65-main.dtsi @@ -35,7 +35,10 @@ #interrupt-cells = <3>; interrupt-controller; reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ - <0x00 0x01880000 0x00 0x90000>; /* GICR */ + <0x00 0x01880000 0x00 0x90000>, /* GICR */ + <0x00 0x6f000000 0x00 0x2000>, /* GICC */ + <0x00 0x6f010000 0x00 0x1000>, /* GICH */ + <0x00 0x6f020000 0x00 0x2000>; /* GICV */ /* * vcpumntirq: * virtual CPU interface maintenance interrupt @@ -88,6 +91,7 @@ clock-frequency = <48000000>; current-speed = <115200>; power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; }; main_uart1: serial@2810000 { @@ -96,6 +100,7 @@ interrupts = ; clock-frequency = <48000000>; power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; }; main_uart2: serial@2820000 { @@ -104,29 +109,47 @@ interrupts = ; clock-frequency = <48000000>; power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; }; crypto: crypto@4e00000 { compatible = "ti,am654-sa2ul"; reg = <0x0 0x4e00000 0x0 0x1200>; - power-domains = <&k3_pds 136 TI_SCI_PD_EXCLUSIVE>; + power-domains = <&k3_pds 136 TI_SCI_PD_SHARED>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>; - dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, - <&main_udmap 0x4001>; + dmas = <&main_udmap 0xc001>, <&main_udmap 0x4002>, + <&main_udmap 0x4003>; dma-names = "tx", "rx1", "rx2"; - dma-coherent; rng: rng@4e10000 { compatible = "inside-secure,safexcel-eip76"; reg = <0x0 0x4e10000 0x0 0x7d>; interrupts = ; - clocks = <&k3_clks 136 1>; + status = "disabled"; /* Used by OP-TEE */ }; }; + /* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */ + main_timerio_input: pinctrl@104200 { + compatible = "pinctrl-single"; + reg = <0x0 0x104200 0x0 0x30>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000001ff>; + }; + + /* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */ + main_timerio_output: pinctrl@104280 { + compatible = "pinctrl-single"; + reg = <0x0 0x104280 0x0 0x20>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x0000000f>; + }; + main_pmx0: pinctrl@11c000 { compatible = "pinctrl-single"; reg = <0x0 0x11c000 0x0 0x2e4>; @@ -152,6 +175,7 @@ clock-names = "fck"; clocks = <&k3_clks 110 1>; power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; }; main_i2c1: i2c@2010000 { @@ -163,6 +187,7 @@ clock-names = "fck"; clocks = <&k3_clks 111 1>; power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; }; main_i2c2: i2c@2020000 { @@ -174,6 +199,7 @@ clock-names = "fck"; clocks = <&k3_clks 112 1>; power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; }; main_i2c3: i2c@2030000 { @@ -185,6 +211,7 @@ clock-names = "fck"; clocks = <&k3_clks 113 1>; power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; }; ecap0: pwm@3100000 { @@ -194,6 +221,7 @@ power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 39 0>; clock-names = "fck"; + status = "disabled"; }; main_spi0: spi@2100000 { @@ -206,6 +234,7 @@ #size-cells = <0>; dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>; dma-names = "tx0", "rx0"; + status = "disabled"; }; main_spi1: spi@2110000 { @@ -218,6 +247,7 @@ #size-cells = <0>; assigned-clocks = <&k3_clks 137 1>; assigned-clock-rates = <48000000>; + status = "disabled"; }; main_spi2: spi@2120000 { @@ -228,6 +258,7 @@ power-domains = <&k3_pds 139 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; main_spi3: spi@2130000 { @@ -238,6 +269,7 @@ power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; main_spi4: spi@2140000 { @@ -248,6 +280,151 @@ power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; + }; + + main_timer0: timer@2400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2400000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 23 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 23 0>; + assigned-clock-parents = <&k3_clks 23 1>; + power-domains = <&k3_pds 23 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer1: timer@2410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2410000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 24 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 24 0>; + assigned-clock-parents = <&k3_clks 24 1>; + power-domains = <&k3_pds 24 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer2: timer@2420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2420000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 27 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 27 0>; + assigned-clock-parents = <&k3_clks 27 1>; + power-domains = <&k3_pds 27 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer3: timer@2430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2430000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 28 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 28 0>; + assigned-clock-parents = <&k3_clks 28 1>; + power-domains = <&k3_pds 28 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer4: timer@2440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2440000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 29 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 29 0>; + assigned-clock-parents = <&k3_clks 29 1>; + power-domains = <&k3_pds 29 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer5: timer@2450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2450000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 30 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 30 0>; + assigned-clock-parents = <&k3_clks 30 1>; + power-domains = <&k3_pds 30 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer6: timer@2460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2460000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 31 0>; + assigned-clocks = <&k3_clks 31 0>; + assigned-clock-parents = <&k3_clks 31 1>; + clock-names = "fck"; + power-domains = <&k3_pds 31 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer7: timer@2470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2470000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 32 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 32 0>; + assigned-clock-parents = <&k3_clks 32 1>; + power-domains = <&k3_pds 32 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer8: timer@2480000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2480000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 33 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 33 0>; + assigned-clock-parents = <&k3_clks 33 1>; + power-domains = <&k3_pds 33 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer9: timer@2490000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2490000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 34 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 34 0>; + assigned-clock-parents = <&k3_clks 34 1>; + power-domains = <&k3_pds 34 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer10: timer@24a0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24a0000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 25 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 25 0>; + assigned-clock-parents = <&k3_clks 25 1>; + power-domains = <&k3_pds 25 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer11: timer@24b0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24b0000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 26 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 26 0>; + assigned-clock-parents = <&k3_clks 26 1>; + power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; }; sdhci0: mmc@4f80000 { @@ -292,7 +469,6 @@ ti,otap-del-sel-ddr52 = <0x4>; ti,otap-del-sel-hs200 = <0x7>; ti,clkbuf-sel = <0x7>; - ti,otap-del-sel = <0x2>; ti,trm-icp = <0x8>; dma-coherent; }; @@ -304,21 +480,6 @@ #size-cells = <1>; ranges = <0x0 0x0 0x00100000 0x1c000>; - pcie0_mode: pcie-mode@4060 { - compatible = "syscon"; - reg = <0x00004060 0x4>; - }; - - pcie1_mode: pcie-mode@4070 { - compatible = "syscon"; - reg = <0x00004070 0x4>; - }; - - pcie_devid: pcie-devid@210 { - compatible = "syscon"; - reg = <0x00000210 0x4>; - }; - serdes0_clk: clock@4080 { compatible = "syscon"; reg = <0x00004080 0x4>; @@ -338,11 +499,11 @@ dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 { compatible = "syscon"; - reg = <0x0000041e0 0x14>; + reg = <0x000041e0 0x14>; }; - ehrpwm_tbclk: clock@4140 { - compatible = "ti,am654-ehrpwm-tbclk", "syscon"; + ehrpwm_tbclk: clock-controller@4140 { + compatible = "ti,am654-ehrpwm-tbclk"; reg = <0x4140 0x18>; #clock-cells = <1>; }; @@ -439,7 +600,7 @@ }; main_navss: bus@30800000 { - compatible = "simple-mfd"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>; @@ -497,6 +658,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; interrupt-parent = <&intr_main_navss>; + status = "disabled"; }; mailbox0_cluster1: mailbox@31f81000 { @@ -506,6 +668,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; interrupt-parent = <&intr_main_navss>; + status = "disabled"; }; mailbox0_cluster2: mailbox@31f82000 { @@ -515,6 +678,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; interrupt-parent = <&intr_main_navss>; + status = "disabled"; }; mailbox0_cluster3: mailbox@31f83000 { @@ -524,6 +688,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; interrupt-parent = <&intr_main_navss>; + status = "disabled"; }; mailbox0_cluster4: mailbox@31f84000 { @@ -533,6 +698,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; interrupt-parent = <&intr_main_navss>; + status = "disabled"; }; mailbox0_cluster5: mailbox@31f85000 { @@ -542,6 +708,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; interrupt-parent = <&intr_main_navss>; + status = "disabled"; }; mailbox0_cluster6: mailbox@31f86000 { @@ -551,6 +718,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; interrupt-parent = <&intr_main_navss>; + status = "disabled"; }; mailbox0_cluster7: mailbox@31f87000 { @@ -560,6 +728,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; interrupt-parent = <&intr_main_navss>; + status = "disabled"; }; mailbox0_cluster8: mailbox@31f88000 { @@ -569,6 +738,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; interrupt-parent = <&intr_main_navss>; + status = "disabled"; }; mailbox0_cluster9: mailbox@31f89000 { @@ -578,6 +748,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; interrupt-parent = <&intr_main_navss>; + status = "disabled"; }; mailbox0_cluster10: mailbox@31f8a000 { @@ -587,6 +758,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; interrupt-parent = <&intr_main_navss>; + status = "disabled"; }; mailbox0_cluster11: mailbox@31f8b000 { @@ -596,15 +768,17 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; interrupt-parent = <&intr_main_navss>; + status = "disabled"; }; ringacc: ringacc@3c000000 { compatible = "ti,am654-navss-ringacc"; - reg = <0x0 0x3c000000 0x0 0x400000>, - <0x0 0x38000000 0x0 0x400000>, - <0x0 0x31120000 0x0 0x100>, - <0x0 0x33000000 0x0 0x40000>; - reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + reg = <0x0 0x3c000000 0x0 0x400000>, + <0x0 0x38000000 0x0 0x400000>, + <0x0 0x31120000 0x0 0x100>, + <0x0 0x33000000 0x0 0x40000>, + <0x0 0x31080000 0x0 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg"; ti,num-rings = <818>; ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ ti,sci = <&dmsc>; @@ -614,9 +788,9 @@ main_udmap: dma-controller@31150000 { compatible = "ti,am654-navss-main-udmap"; - reg = <0x0 0x31150000 0x0 0x100>, - <0x0 0x34000000 0x0 0x100000>, - <0x0 0x35000000 0x0 0x100000>; + reg = <0x0 0x31150000 0x0 0x100>, + <0x0 0x34000000 0x0 0x100000>, + <0x0 0x35000000 0x0 0x100000>; reg-names = "gcfg", "rchanrt", "tchanrt"; msi-parent = <&inta_main_udmass>; #dma-cells = <1>; @@ -687,15 +861,15 @@ pcie0_rc: pcie@5500000 { compatible = "ti,am654-pcie-rc"; - reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>; + reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>; reg-names = "app", "dbics", "config", "atu"; power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000 - 0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>; - ti,syscon-pcie-id = <&pcie_devid>; - ti,syscon-pcie-mode = <&pcie0_mode>; + ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000>, + <0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>; + ti,syscon-pcie-id = <&scm_conf 0x210>; + ti,syscon-pcie-mode = <&scm_conf 0x4060>; bus-range = <0x0 0xff>; num-viewport = <16>; max-link-speed = <2>; @@ -703,32 +877,34 @@ interrupts = ; msi-map = <0x0 &gic_its 0x0 0x10000>; device_type = "pci"; + status = "disabled"; }; pcie0_ep: pcie-ep@5500000 { compatible = "ti,am654-pcie-ep"; - reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>; + reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>; reg-names = "app", "dbics", "addr_space", "atu"; power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; - ti,syscon-pcie-mode = <&pcie0_mode>; + ti,syscon-pcie-mode = <&scm_conf 0x4060>; num-ib-windows = <16>; num-ob-windows = <16>; max-link-speed = <2>; dma-coherent; interrupts = ; + status = "disabled"; }; pcie1_rc: pcie@5600000 { compatible = "ti,am654-pcie-rc"; - reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>; + reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>; reg-names = "app", "dbics", "config", "atu"; power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000 - 0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>; - ti,syscon-pcie-id = <&pcie_devid>; - ti,syscon-pcie-mode = <&pcie1_mode>; + ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000>, + <0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>; + ti,syscon-pcie-id = <&scm_conf 0x210>; + ti,syscon-pcie-mode = <&scm_conf 0x4070>; bus-range = <0x0 0xff>; num-viewport = <16>; max-link-speed = <2>; @@ -736,19 +912,21 @@ interrupts = ; msi-map = <0x0 &gic_its 0x10000 0x10000>; device_type = "pci"; + status = "disabled"; }; pcie1_ep: pcie-ep@5600000 { compatible = "ti,am654-pcie-ep"; - reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>; + reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>; reg-names = "app", "dbics", "addr_space", "atu"; power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; - ti,syscon-pcie-mode = <&pcie1_mode>; + ti,syscon-pcie-mode = <&scm_conf 0x4070>; num-ib-windows = <16>; num-ob-windows = <16>; max-link-speed = <2>; dma-coherent; interrupts = ; + status = "disabled"; }; mcasp0: mcasp@2b00000 { @@ -766,6 +944,7 @@ clocks = <&k3_clks 104 0>; clock-names = "fck"; power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; }; mcasp1: mcasp@2b10000 { @@ -783,6 +962,7 @@ clocks = <&k3_clks 105 0>; clock-names = "fck"; power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; }; mcasp2: mcasp@2b20000 { @@ -800,6 +980,7 @@ clocks = <&k3_clks 106 0>; clock-names = "fck"; power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; }; cal: cal@6f03000 { @@ -826,13 +1007,13 @@ dss: dss@4a00000 { compatible = "ti,am65x-dss"; - reg = <0x0 0x04a00000 0x0 0x1000>, /* common */ - <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */ - <0x0 0x04a06000 0x0 0x1000>, /* vid */ - <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */ - <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */ - <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */ - <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */ + reg = <0x0 0x04a00000 0x0 0x1000>, /* common */ + <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */ + <0x0 0x04a06000 0x0 0x1000>, /* vid */ + <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */ + <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */ + <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */ + <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */ reg-names = "common", "vidl1", "vid", "ovr1", "ovr2", "vp1", "vp2"; @@ -840,9 +1021,9 @@ power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 67 1>, - <&k3_clks 216 1>, - <&k3_clks 67 2>; + clocks = <&k3_clks 67 1>, + <&k3_clks 216 1>, + <&k3_clks 67 2>; clock-names = "fck", "vp1", "vp2"; /* @@ -870,6 +1051,7 @@ power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>; clocks = <&ehrpwm_tbclk 0>, <&k3_clks 40 0>; clock-names = "tbclk", "fck"; + status = "disabled"; }; ehrpwm1: pwm@3010000 { @@ -879,6 +1061,7 @@ power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>; clocks = <&ehrpwm_tbclk 1>, <&k3_clks 41 0>; clock-names = "tbclk", "fck"; + status = "disabled"; }; ehrpwm2: pwm@3020000 { @@ -888,6 +1071,7 @@ power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>; clocks = <&ehrpwm_tbclk 2>, <&k3_clks 42 0>; clock-names = "tbclk", "fck"; + status = "disabled"; }; ehrpwm3: pwm@3030000 { @@ -897,6 +1081,7 @@ power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>; clocks = <&ehrpwm_tbclk 3>, <&k3_clks 43 0>; clock-names = "tbclk", "fck"; + status = "disabled"; }; ehrpwm4: pwm@3040000 { @@ -906,6 +1091,7 @@ power-domains = <&k3_pds 44 TI_SCI_PD_EXCLUSIVE>; clocks = <&ehrpwm_tbclk 4>, <&k3_clks 44 0>; clock-names = "tbclk", "fck"; + status = "disabled"; }; ehrpwm5: pwm@3050000 { @@ -915,6 +1101,7 @@ power-domains = <&k3_pds 45 TI_SCI_PD_EXCLUSIVE>; clocks = <&ehrpwm_tbclk 5>, <&k3_clks 45 0>; clock-names = "tbclk", "fck"; + status = "disabled"; }; icssg0: icssg@b000000 { @@ -964,6 +1151,18 @@ }; }; + icssg0_iep0: iep@2e000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2e000 0x1000>; + clocks = <&icssg0_iepclk_mux>; + }; + + icssg0_iep1: iep@2f000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2f000 0x1000>; + clocks = <&icssg0_iepclk_mux>; + }; + icssg0_mii_rt: mii-rt@32000 { compatible = "ti,pruss-mii", "syscon"; reg = <0x32000 0x100>; @@ -1055,6 +1254,7 @@ #address-cells = <1>; #size-cells = <0>; bus_freq = <1000000>; + status = "disabled"; }; }; @@ -1105,6 +1305,18 @@ }; }; + icssg1_iep0: iep@2e000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2e000 0x1000>; + clocks = <&icssg1_iepclk_mux>; + }; + + icssg1_iep1: iep@2f000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2f000 0x1000>; + clocks = <&icssg1_iepclk_mux>; + }; + icssg1_mii_rt: mii-rt@32000 { compatible = "ti,pruss-mii", "syscon"; reg = <0x32000 0x100>; @@ -1196,6 +1408,7 @@ #address-cells = <1>; #size-cells = <0>; bus_freq = <1000000>; + status = "disabled"; }; }; @@ -1246,6 +1459,18 @@ }; }; + icssg2_iep0: iep@2e000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2e000 0x1000>; + clocks = <&icssg2_iepclk_mux>; + }; + + icssg2_iep1: iep@2f000 { + compatible = "ti,am654-icss-iep"; + reg = <0x2f000 0x1000>; + clocks = <&icssg2_iepclk_mux>; + }; + icssg2_mii_rt: mii-rt@32000 { compatible = "ti,pruss-mii", "syscon"; reg = <0x32000 0x100>; @@ -1337,6 +1562,7 @@ #address-cells = <1>; #size-cells = <0>; bus_freq = <1000000>; + status = "disabled"; }; }; }; diff --git a/arch/arm/dts/k3-am65-mcu.dtsi b/arch/arm/dts/k3-am65-mcu.dtsi index c93ff1520a..edd5cfbec4 100644 --- a/arch/arm/dts/k3-am65-mcu.dtsi +++ b/arch/arm/dts/k3-am65-mcu.dtsi @@ -20,13 +20,32 @@ }; }; + /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */ + mcu_timerio_input: pinctrl@40f04200 { + compatible = "pinctrl-single"; + reg = <0x0 0x40f04200 0x0 0x10>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x00000101>; + }; + + /* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */ + mcu_timerio_output: pinctrl@40f04280 { + compatible = "pinctrl-single"; + reg = <0x0 0x40f04280 0x0 0x8>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x00000003>; + }; + mcu_uart0: serial@40a00000 { compatible = "ti,am654-uart"; - reg = <0x00 0x40a00000 0x00 0x100>; - interrupts = ; - clock-frequency = <96000000>; - current-speed = <115200>; - power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; + reg = <0x00 0x40a00000 0x00 0x100>; + interrupts = ; + clock-frequency = <96000000>; + current-speed = <115200>; + power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; }; mcu_ram: sram@41c00000 { @@ -46,6 +65,7 @@ clock-names = "fck"; clocks = <&k3_clks 114 1>; power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; }; mcu_spi0: spi@40300000 { @@ -56,6 +76,7 @@ power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; mcu_spi1: spi@40310000 { @@ -66,6 +87,7 @@ power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; mcu_spi2: spi@40320000 { @@ -76,6 +98,7 @@ power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; tscadc0: tscadc@40200000 { @@ -85,10 +108,11 @@ clocks = <&k3_clks 0 2>; assigned-clocks = <&k3_clks 0 2>; assigned-clock-rates = <60000000>; - clock-names = "adc_tsc_fck"; + clock-names = "fck"; dmas = <&mcu_udmap 0x7100>, <&mcu_udmap 0x7101 >; dma-names = "fifo0", "fifo1"; + status = "disabled"; adc { #io-channel-cells = <1>; @@ -103,10 +127,11 @@ clocks = <&k3_clks 1 2>; assigned-clocks = <&k3_clks 1 2>; assigned-clock-rates = <60000000>; - clock-names = "adc_tsc_fck"; + clock-names = "fck"; dmas = <&mcu_udmap 0x7102>, <&mcu_udmap 0x7103>; dma-names = "fifo0", "fifo1"; + status = "disabled"; adc { #io-channel-cells = <1>; @@ -114,8 +139,53 @@ }; }; + /* + * The MCU domain timer interrupts are routed only to the ESM module, + * and not currently available for Linux. The MCU domain timers are + * of limited use without interrupts, and likely reserved by the ESM. + */ + mcu_timer0: timer@40400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40400000 0x00 0x400>; + clocks = <&k3_clks 35 0>; + clock-names = "fck"; + power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer1: timer@40410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40410000 0x00 0x400>; + clocks = <&k3_clks 36 0>; + clock-names = "fck"; + power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer2: timer@40420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40420000 0x00 0x400>; + clocks = <&k3_clks 37 0>; + clock-names = "fck"; + power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer3: timer@40430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x40430000 0x00 0x400>; + clocks = <&k3_clks 38 0>; + clock-names = "fck"; + power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + mcu_navss: bus@28380000 { - compatible = "simple-mfd"; + compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; @@ -126,11 +196,13 @@ mcu_ringacc: ringacc@2b800000 { compatible = "ti,am654-navss-ringacc"; - reg = <0x0 0x2b800000 0x0 0x400000>, - <0x0 0x2b000000 0x0 0x400000>, - <0x0 0x28590000 0x0 0x100>, - <0x0 0x2a500000 0x0 0x40000>; - reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + reg = <0x0 0x2b800000 0x0 0x400000>, + <0x0 0x2b000000 0x0 0x400000>, + <0x0 0x28590000 0x0 0x100>, + <0x0 0x2a500000 0x0 0x40000>, + <0x0 0x28440000 0x0 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", + "proxy_target", "cfg"; ti,num-rings = <286>; ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ ti,sci = <&dmsc>; @@ -140,9 +212,9 @@ mcu_udmap: dma-controller@285c0000 { compatible = "ti,am654-navss-mcu-udmap"; - reg = <0x0 0x285c0000 0x0 0x100>, - <0x0 0x2a800000 0x0 0x40000>, - <0x0 0x2aa00000 0x0 0x40000>; + reg = <0x0 0x285c0000 0x0 0x100>, + <0x0 0x2a800000 0x0 0x40000>, + <0x0 0x2aa00000 0x0 0x40000>; reg-names = "gcfg", "rchanrt", "tchanrt"; msi-parent = <&inta_main_udmass>; #dma-cells = <1>; @@ -159,7 +231,54 @@ }; }; - fss: fss@47000000 { + secure_proxy_mcu: mailbox@2a480000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x0 0x2a480000 0x0 0x80000>, + <0x0 0x2a380000 0x0 0x80000>, + <0x0 0x2a400000 0x0 0x80000>; + /* + * Marked Disabled: + * Node is incomplete as it is meant for bootloaders and + * firmware on non-MPU processors + */ + status = "disabled"; + }; + + m_can0: can@40528000 { + compatible = "bosch,m_can"; + reg = <0x0 0x40528000 0x0 0x400>, + <0x0 0x40500000 0x0 0x4400>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 102 5>, <&k3_clks 102 0>; + clock-names = "hclk", "cclk"; + interrupt-parent = <&gic500>; + interrupts = , + ; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + m_can1: can@40568000 { + compatible = "bosch,m_can"; + reg = <0x0 0x40568000 0x0 0x400>, + <0x0 0x40540000 0x0 0x4400>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 103 5>, <&k3_clks 103 0>; + clock-names = "hclk", "cclk"; + interrupt-parent = <&gic500>; + interrupts = , + ; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + status = "disabled"; + }; + + fss: bus@47000000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -180,6 +299,7 @@ power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; ospi1: spi@47050000 { @@ -194,6 +314,7 @@ power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; }; @@ -243,6 +364,7 @@ clocks = <&k3_clks 5 10>; clock-names = "fck"; bus_freq = <1000000>; + status = "disabled"; }; cpts@3d000 { diff --git a/arch/arm/dts/k3-am65-wakeup.dtsi b/arch/arm/dts/k3-am65-wakeup.dtsi index 9d21cdf6fc..fd2b998ebd 100644 --- a/arch/arm/dts/k3-am65-wakeup.dtsi +++ b/arch/arm/dts/k3-am65-wakeup.dtsi @@ -12,8 +12,8 @@ mbox-names = "rx", "tx"; - mboxes= <&secure_proxy_main 11>, - <&secure_proxy_main 13>; + mboxes = <&secure_proxy_main 11>, + <&secure_proxy_main 13>; reg-names = "debug_messages"; reg = <0x44083000 0x1000>; @@ -54,6 +54,7 @@ clock-frequency = <48000000>; current-speed = <115200>; power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; }; wkup_i2c0: i2c@42120000 { @@ -65,6 +66,7 @@ clock-names = "fck"; clocks = <&k3_clks 115 1>; power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; }; intr_wkup_gpio: interrupt-controller@42200000 { @@ -100,8 +102,4 @@ power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; #thermal-sensor-cells = <1>; }; - - thermal_zones: thermal-zones { - #include "k3-am654-industrial-thermal.dtsi" - }; }; diff --git a/arch/arm/dts/k3-am65.dtsi b/arch/arm/dts/k3-am65.dtsi index a9fc1af03f..4d7b6155a7 100644 --- a/arch/arm/dts/k3-am65.dtsi +++ b/arch/arm/dts/k3-am65.dtsi @@ -8,9 +8,10 @@ #include #include #include -#include #include +#include "k3-pinctrl.h" + / { model = "Texas Instruments K3 AM654 SoC"; compatible = "ti,am654"; @@ -18,21 +19,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - serial0 = &wkup_uart0; - serial1 = &mcu_uart0; - serial2 = &main_uart0; - serial3 = &main_uart1; - serial4 = &main_uart2; - i2c0 = &wkup_i2c0; - i2c1 = &mcu_i2c0; - i2c2 = &main_i2c0; - i2c3 = &main_i2c1; - i2c4 = &main_i2c2; - i2c5 = &main_i2c3; - ethernet0 = &cpsw_port1; - }; - chosen { }; firmware { @@ -84,6 +70,7 @@ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, + <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A53 PERIPHBASE */ <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>, <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; diff --git a/arch/arm/dts/k3-am654-base-board.dts b/arch/arm/dts/k3-am654-base-board.dts index cfbcebfa37..1637ec5ab5 100644 --- a/arch/arm/dts/k3-am654-base-board.dts +++ b/arch/arm/dts/k3-am654-base-board.dts @@ -10,12 +10,25 @@ #include / { - compatible = "ti,am654-evm", "ti,am654"; + compatible = "ti,am654-evm", "ti,am654"; model = "Texas Instruments AM654 Base Board"; + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + i2c0 = &wkup_i2c0; + i2c1 = &mcu_i2c0; + i2c2 = &main_i2c0; + i2c3 = &main_i2c1; + i2c4 = &main_i2c2; + ethernet0 = &cpsw_port1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + }; + chosen { stdout-path = "serial2:115200n8"; - bootargs = "earlycon=ns16550a,mmio32,0x02800000"; }; memory@80000000 { @@ -73,20 +86,20 @@ pinctrl-names = "default"; pinctrl-0 = <&push_button_pins_default>; - sw5 { + switch-5 { label = "GPIO Key USER1"; linux,code = ; gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>; }; - sw6 { + switch-6 { label = "GPIO Key USER2"; linux,code = ; gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>; }; }; - evm_12v0: fixedregulator-evm12v0 { + evm_12v0: regulator-0 { /* main supply */ compatible = "regulator-fixed"; regulator-name = "evm_12v0"; @@ -96,7 +109,7 @@ regulator-boot-on; }; - vcc3v3_io: fixedregulator-vcc3v3io { + vcc3v3_io: regulator-1 { /* Output of TPS54334 */ compatible = "regulator-fixed"; regulator-name = "vcc3v3_io"; @@ -107,7 +120,7 @@ vin-supply = <&evm_12v0>; }; - vdd_mmc1_sd: fixedregulator-sd { + vdd_mmc1_sd: regulator-2 { compatible = "regulator-fixed"; regulator-name = "vdd_mmc1_sd"; regulator-min-microvolt = <3300000>; @@ -117,24 +130,53 @@ vin-supply = <&vcc3v3_io>; gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>; }; + + vtt_supply: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "vtt"; + pinctrl-names = "default"; + pinctrl-0 = <&ddr_vtt_pins_default>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_io>; + gpio = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>; + }; }; &wkup_pmx0 { - wkup_i2c0_pins_default: wkup-i2c0-pins-default { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT, 0) /* (AB1) WKUP_UART0_RXD */ + AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (AB5) WKUP_UART0_TXD */ + AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1) /* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */ + AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1) /* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */ + >; + }; + + ddr_vtt_pins_default: ddr-vtt-default-pins { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7) /* WKUP_GPIO0_28 */ + >; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */ AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */ >; }; - push_button_pins_default: push-button-pins-default { + push_button_pins_default: push-button-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */ AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */ >; }; - mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */ AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */ @@ -150,13 +192,22 @@ >; }; - wkup_pca554_default: wkup-pca554-default { + wkup_pca554_default: wkup-pca554-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ >; }; - mcu_cpsw_pins_default: mcu-cpsw-pins-default { + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) /* (P4) MCU_OSPI1_D1.MCU_UART0_RXD */ + AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) /* (P5) MCU_OSPI1_D2.MCU_UART0_TXD */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4) /* (P1) MCU_OSPI1_D3.MCU_UART0_CTSn */ + AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4) /* (N3) MCU_OSPI1_CSn1.MCU_UART0_RTSn */ + >; + }; + + mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */ AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */ @@ -173,16 +224,23 @@ >; }; - mcu_mdio_pins_default: mcu-mdio1-pins-default { + mcu_mdio_pins_default: mcu-mdio1-default-pins { pinctrl-single,pins = < AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */ AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ >; }; + + mcu_i2c0_pins_default: mcu-i2c0-default-pins { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT, 0) /* (AD8) MCU_I2C0_SCL */ + AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT, 0) /* (AD7) MCU_I2C0_SDA */ + >; + }; }; &main_pmx0 { - main_uart0_pins_default: main-uart0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */ AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */ @@ -191,14 +249,14 @@ >; }; - main_i2c2_pins_default: main-i2c2-pins-default { + main_i2c2_pins_default: main-i2c2-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) GPMC0_CSn3.I2C2_SCL */ AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) GPMC0_CSn2.I2C2_SDA */ >; }; - main_spi0_pins_default: main-spi0-pins-default { + main_spi0_pins_default: main-spi0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */ AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */ @@ -207,7 +265,7 @@ >; }; - main_mmc0_pins_default: main-mmc0-pins-default { + main_mmc0_pins_default: main-mmc0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */ AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */ @@ -224,7 +282,7 @@ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ @@ -237,7 +295,7 @@ >; }; - usb1_pins_default: usb1-pins-default { + usb1_pins_default: usb1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ >; @@ -245,21 +303,21 @@ }; &main_pmx1 { - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */ AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */ AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ >; }; - ecap0_pins_default: ecap0-pins-default { + ecap0_pins_default: ecap0-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */ >; @@ -269,19 +327,55 @@ &wkup_uart0 { /* Wakeup UART is used by System firmware */ status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; +}; + +&mcu_uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; }; &main_uart0 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; }; &wkup_i2c0 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&wkup_i2c0_pins_default>; clock-frequency = <400000>; + eeprom@50 { + /* AT24CM01 */ + compatible = "atmel,24c1024"; + reg = <0x50>; + }; + + vdd_mpu: regulator@60 { + compatible = "ti,tps62363"; + reg = <0x60>; + regulator-name = "VDD_MPU"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1770000>; + regulator-always-on; + regulator-boot-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + ti,enable-vout-discharge; + }; + + gpio@38 { + compatible = "nxp,pca9554"; + reg = <0x38>; + gpio-controller; + #gpio-cells = <2>; + }; + pca9554: gpio@39 { compatible = "nxp,pca9554"; reg = <0x39>; @@ -296,7 +390,15 @@ }; }; +&mcu_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_i2c0_pins_default>; + clock-frequency = <400000>; +}; + &main_i2c0 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; clock-frequency = <400000>; @@ -310,37 +412,39 @@ }; &main_i2c1 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; }; &main_i2c2 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c2_pins_default>; clock-frequency = <400000>; }; &ecap0 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ecap0_pins_default>; }; &main_spi0 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_spi0_pins_default>; #address-cells = <1>; - #size-cells= <0>; + #size-cells = <0>; ti,pindir-d0-out-d1-in; - flash@0{ + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <1>; spi-max-frequency = <48000000>; - #address-cells = <1>; - #size-cells= <1>; }; }; @@ -381,12 +485,14 @@ }; &tscadc0 { + status = "okay"; adc { ti,adc-channels = <0 1 2 3 4 5 6 7>; }; }; &tscadc1 { + status = "okay"; adc { ti,adc-channels = <0 1 2 3 4 5 6 7>; }; @@ -400,23 +506,8 @@ status = "disabled"; }; -&pcie0_rc { - status = "disabled"; -}; - -&pcie0_ep { - status = "disabled"; -}; - -&pcie1_rc { - status = "disabled"; -}; - -&pcie1_ep { - status = "disabled"; -}; - &mailbox0_cluster0 { + status = "okay"; interrupts = <436>; mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { @@ -426,6 +517,7 @@ }; &mailbox0_cluster1 { + status = "okay"; interrupts = <432>; mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { @@ -434,63 +526,24 @@ }; }; -&mailbox0_cluster2 { - status = "disabled"; -}; - -&mailbox0_cluster3 { - status = "disabled"; -}; - -&mailbox0_cluster4 { - status = "disabled"; -}; - -&mailbox0_cluster5 { - status = "disabled"; -}; - -&mailbox0_cluster6 { - status = "disabled"; -}; - -&mailbox0_cluster7 { - status = "disabled"; -}; - -&mailbox0_cluster8 { - status = "disabled"; -}; - -&mailbox0_cluster9 { - status = "disabled"; -}; - -&mailbox0_cluster10 { - status = "disabled"; -}; - -&mailbox0_cluster11 { - status = "disabled"; -}; - &mcu_r5fss0_core0 { memory-region = <&mcu_r5fss0_core0_dma_memory_region>, <&mcu_r5fss0_core0_memory_region>; - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; }; &mcu_r5fss0_core1 { memory-region = <&mcu_r5fss0_core1_dma_memory_region>, <&mcu_r5fss0_core1_memory_region>; - mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>; + mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>; }; &ospi0 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; - flash@0{ + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <8>; @@ -501,17 +554,65 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <0>; - #address-cells = <1>; - #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "ospi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "ospi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "ospi.env"; + reg = <0x680000 0x20000>; + }; + + partition@6a0000 { + label = "ospi.env.backup"; + reg = <0x6a0000 0x20000>; + }; + + partition@6c0000 { + label = "ospi.sysfw"; + reg = <0x6c0000 0x100000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fe0000 { + label = "ospi.phypattern"; + reg = <0x3fe0000 0x20000>; + }; + }; }; }; &mcu_cpsw { pinctrl-names = "default"; - pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; + pinctrl-0 = <&mcu_cpsw_pins_default>; }; &davinci_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mdio_pins_default>; + phy0: ethernet-phy@0 { reg = <0>; ti,rx-internal-delay = ; @@ -524,30 +625,6 @@ phy-handle = <&phy0>; }; -&mcasp0 { - status = "disabled"; -}; - -&mcasp1 { - status = "disabled"; -}; - -&mcasp2 { - status = "disabled"; -}; - &dss { status = "disabled"; }; - -&icssg0_mdio { - status = "disabled"; -}; - -&icssg1_mdio { - status = "disabled"; -}; - -&icssg2_mdio { - status = "disabled"; -}; diff --git a/arch/arm/dts/k3-am654.dtsi b/arch/arm/dts/k3-am654.dtsi index f0a6541b80..888567b921 100644 --- a/arch/arm/dts/k3-am654.dtsi +++ b/arch/arm/dts/k3-am654.dtsi @@ -93,6 +93,7 @@ L2_0: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; cache-size = <0x80000>; cache-line-size = <64>; cache-sets = <512>; @@ -102,6 +103,7 @@ L2_1: l2-cache1 { compatible = "cache"; cache-level = <2>; + cache-unified; cache-size = <0x80000>; cache-line-size = <64>; cache-sets = <512>; @@ -111,5 +113,10 @@ msmc_l3: l3-cache0 { compatible = "cache"; cache-level = <3>; + cache-unified; + }; + + thermal_zones: thermal-zones { + #include "k3-am654-industrial-thermal.dtsi" }; };