From: Jonas Karlman <jonas@kwiboo.se>
Date: Fri, 26 Jan 2024 22:14:51 +0000 (+0000)
Subject: rockchip: rk356x: Move common uart2 props to rk356x-u-boot.dtsi
X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=473e54e79511044214a228bf6b7b50aaa29ed079;p=u-boot.git

rockchip: rk356x: Move common uart2 props to rk356x-u-boot.dtsi

Move uart2 bootph-pre-ram and clock-frequency props from board to SoC
u-boot.dtsi. Regular board device tree already enables the uart2 node,
so status prop is dropped from u-boot.dtsi file.

Also remove unnecessary stdout-path = &uart2, regular board device tree
already provide a stdout-path = "serial2:" value.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---

diff --git a/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi b/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi
index f986e1941e..fa3df73c33 100644
--- a/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi
+++ b/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi
@@ -4,7 +4,6 @@
 
 / {
 	chosen {
-		stdout-path = &uart2;
 		u-boot,spl-boot-order = "same-as-spl", &sdmmc1, &sdmmc0;
 	};
 
@@ -88,9 +87,3 @@
 	vqmmc-supply = <&vcc_1v8>;
 	status = "okay";
 };
-
-&uart2 {
-	clock-frequency = <24000000>;
-	bootph-all;
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3566-quartz64-a-u-boot.dtsi b/arch/arm/dts/rk3566-quartz64-a-u-boot.dtsi
index 06cc15ed21..11976fd3a6 100644
--- a/arch/arm/dts/rk3566-quartz64-a-u-boot.dtsi
+++ b/arch/arm/dts/rk3566-quartz64-a-u-boot.dtsi
@@ -2,12 +2,6 @@
 
 #include "rk356x-u-boot.dtsi"
 
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-};
-
 &gpio0 {
 	bootph-all;
 };
@@ -28,12 +22,6 @@
 	};
 };
 
-&uart2 {
-	bootph-all;
-	clock-frequency = <24000000>;
-	status = "okay";
-};
-
 /*
  * U-Boot does not support multiple regulators using the same gpio,
  * use vcc5v0_usb20_host to fix use of USB 2.0 port
diff --git a/arch/arm/dts/rk3566-quartz64-b-u-boot.dtsi b/arch/arm/dts/rk3566-quartz64-b-u-boot.dtsi
index 3c2c54e941..8de9d1535e 100644
--- a/arch/arm/dts/rk3566-quartz64-b-u-boot.dtsi
+++ b/arch/arm/dts/rk3566-quartz64-b-u-boot.dtsi
@@ -2,12 +2,6 @@
 
 #include "rk356x-u-boot.dtsi"
 
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-};
-
 &sdhci {
 	cap-mmc-highspeed;
 	mmc-ddr-1_8v;
@@ -24,12 +18,6 @@
 	};
 };
 
-&uart2 {
-	bootph-all;
-	clock-frequency = <24000000>;
-	status = "okay";
-};
-
 &usb_host0_xhci {
 	dr_mode = "host";
 };
diff --git a/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi b/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi
index c925439f71..158f652cb3 100644
--- a/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi
+++ b/arch/arm/dts/rk3566-radxa-cm3-io-u-boot.dtsi
@@ -5,19 +5,7 @@
 
 #include "rk356x-u-boot.dtsi"
 
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-};
-
 &sdhci {
 	cap-mmc-highspeed;
 	mmc-ddr-1_8v;
 };
-
-&uart2 {
-	clock-frequency = <24000000>;
-	bootph-all;
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3566-soquartz-u-boot.dtsi b/arch/arm/dts/rk3566-soquartz-u-boot.dtsi
index 793cca2cea..f65f4067f3 100644
--- a/arch/arm/dts/rk3566-soquartz-u-boot.dtsi
+++ b/arch/arm/dts/rk3566-soquartz-u-boot.dtsi
@@ -2,12 +2,6 @@
 
 #include "rk356x-u-boot.dtsi"
 
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-};
-
 &sdhci {
 	cap-mmc-highspeed;
 	mmc-ddr-1_8v;
@@ -15,12 +9,6 @@
 	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
 };
 
-&uart2 {
-	bootph-all;
-	clock-frequency = <24000000>;
-	status = "okay";
-};
-
 &usb_host0_xhci {
 	dr_mode = "host";
 };
diff --git a/arch/arm/dts/rk3568-bpi-r2-pro-u-boot.dtsi b/arch/arm/dts/rk3568-bpi-r2-pro-u-boot.dtsi
index 60a3b21f2d..5f4f14b3bd 100644
--- a/arch/arm/dts/rk3568-bpi-r2-pro-u-boot.dtsi
+++ b/arch/arm/dts/rk3568-bpi-r2-pro-u-boot.dtsi
@@ -4,16 +4,3 @@
  */
 
 #include "rk356x-u-boot.dtsi"
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-};
-
-&uart2 {
-	clock-frequency = <24000000>;
-	bootph-pre-ram;
-	status = "okay";
-};
-
diff --git a/arch/arm/dts/rk3568-evb-u-boot.dtsi b/arch/arm/dts/rk3568-evb-u-boot.dtsi
index 382a52a28b..5f4f14b3bd 100644
--- a/arch/arm/dts/rk3568-evb-u-boot.dtsi
+++ b/arch/arm/dts/rk3568-evb-u-boot.dtsi
@@ -4,20 +4,3 @@
  */
 
 #include "rk356x-u-boot.dtsi"
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-		u-boot,spl-boot-order = "same-as-spl", &sdmmc0, &sdhci;
-	};
-};
-
-&sdmmc0 {
-	status = "okay";
-};
-
-&uart2 {
-	clock-frequency = <24000000>;
-	bootph-pre-ram;
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3568-generic-u-boot.dtsi b/arch/arm/dts/rk3568-generic-u-boot.dtsi
index 90022580a1..6e8307e3bd 100644
--- a/arch/arm/dts/rk3568-generic-u-boot.dtsi
+++ b/arch/arm/dts/rk3568-generic-u-boot.dtsi
@@ -1,14 +1,3 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 
 #include "rk356x-u-boot.dtsi"
-
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-};
-
-&uart2 {
-	bootph-pre-ram;
-	clock-frequency = <24000000>;
-};
diff --git a/arch/arm/dts/rk3568-lubancat-2-u-boot.dtsi b/arch/arm/dts/rk3568-lubancat-2-u-boot.dtsi
index 27c6277523..a44ac35bda 100644
--- a/arch/arm/dts/rk3568-lubancat-2-u-boot.dtsi
+++ b/arch/arm/dts/rk3568-lubancat-2-u-boot.dtsi
@@ -6,12 +6,6 @@
 
 #include "rk356x-u-boot.dtsi"
 
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-};
-
 &sdhci {
 	cap-mmc-highspeed;
 	mmc-ddr-1_8v;
@@ -19,9 +13,3 @@
 	mmc-hs400-enhanced-strobe;
 	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
 };
-
-&uart2 {
-	bootph-all;
-	clock-frequency = <24000000>;
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi
index 880f8ff91f..62f572c4cf 100644
--- a/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi
+++ b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi
@@ -8,12 +8,6 @@
 
 #include "rk356x-u-boot.dtsi"
 
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-};
-
 &pcie3x1 {
 	/delete-property/ vpcie3v3-supply;
 };
@@ -27,12 +21,6 @@
 	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
 };
 
-&uart2 {
-	clock-frequency = <24000000>;
-	bootph-all;
-	status = "okay";
-};
-
 &vcc5v0_usb_host {
 	/delete-property/ regulator-always-on;
 	/delete-property/ regulator-boot-on;
diff --git a/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi b/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi
index 0fc360b06d..ecba91aa30 100644
--- a/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi
+++ b/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi
@@ -2,12 +2,6 @@
 
 #include "rk356x-u-boot.dtsi"
 
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-};
-
 &fspi_dual_io_pins {
 	bootph-all;
 };
@@ -29,9 +23,3 @@
 		bootph-pre-ram;
 	};
 };
-
-&uart2 {
-	bootph-all;
-	clock-frequency = <24000000>;
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk3568-radxa-e25-u-boot.dtsi b/arch/arm/dts/rk3568-radxa-e25-u-boot.dtsi
index 1136f0bb3b..caf5244430 100644
--- a/arch/arm/dts/rk3568-radxa-e25-u-boot.dtsi
+++ b/arch/arm/dts/rk3568-radxa-e25-u-boot.dtsi
@@ -2,12 +2,6 @@
 
 #include "rk356x-u-boot.dtsi"
 
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-};
-
 &pcie3x1 {
 	pinctrl-0 = <&pcie30x1_reset_h>;
 };
@@ -28,12 +22,6 @@
 	mmc-hs400-enhanced-strobe;
 };
 
-&uart2 {
-	bootph-all;
-	clock-frequency = <24000000>;
-	status = "okay";
-};
-
 &usb_host0_xhci {
 	dr_mode = "host";
 };
diff --git a/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi b/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
index b05b7151e6..46ebb77283 100644
--- a/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
+++ b/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
@@ -6,12 +6,6 @@
 
 #include "rk356x-u-boot.dtsi"
 
-/ {
-	chosen {
-		stdout-path = &uart2;
-	};
-};
-
 &pcie3x2 {
 	pinctrl-0 = <&pcie3x2_reset_h>;
 };
@@ -48,9 +42,3 @@
 		spi-tx-bus-width = <1>;
 	};
 };
-
-&uart2 {
-	clock-frequency = <24000000>;
-	bootph-all;
-	status = "okay";
-};
diff --git a/arch/arm/dts/rk356x-u-boot.dtsi b/arch/arm/dts/rk356x-u-boot.dtsi
index 354b6958e5..cacd45348a 100644
--- a/arch/arm/dts/rk356x-u-boot.dtsi
+++ b/arch/arm/dts/rk356x-u-boot.dtsi
@@ -141,6 +141,11 @@
 	bootph-pre-ram;
 };
 
+&uart2 {
+	bootph-pre-ram;
+	clock-frequency = <24000000>;
+};
+
 #ifdef CONFIG_ROCKCHIP_SPI_IMAGE
 &binman {
 	simple-bin-spi {