From: Venkatesh Yadav Abbarapu Date: Mon, 25 Mar 2024 09:50:13 +0000 (+0530) Subject: arm64: dts: zynqmp: make hw-ecc as the default ecc mode X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=46947ef68f6a10352fce148da33521f1d2df37cb;p=u-boot.git arm64: dts: zynqmp: make hw-ecc as the default ecc mode Except for Linux no other component (i.e., u-boot, fsbl or BootRom) of the software stack supports software ecc engine. So, make hw-ecc as the default ecc mode. Update the same for mini u-boot nand configuration as well. Signed-off-by: Venkatesh Yadav Abbarapu Link: https://lore.kernel.org/r/20240325095013.29497-1-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek --- diff --git a/arch/arm/dts/zynqmp-mini-nand.dts b/arch/arm/dts/zynqmp-mini-nand.dts index e0517cf460..5889d436ed 100644 --- a/arch/arm/dts/zynqmp-mini-nand.dts +++ b/arch/arm/dts/zynqmp-mini-nand.dts @@ -50,6 +50,12 @@ #size-cells = <1>; arasan,has-mdma; num-cs = <2>; + nand@0 { + reg = <0>; + #address-cells = <2>; + #size-cells = <1>; + nand-ecc-mode = "hw"; + }; }; }; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts index b97f7ee8d4..48ab619472 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts @@ -136,8 +136,7 @@ reg = <0x0>; #address-cells = <0x2>; #size-cells = <0x1>; - nand-ecc-mode = "soft"; - nand-ecc-algo = "bch"; + nand-ecc-mode = "hw"; nand-rb = <0>; label = "main-storage-0"; nand-ecc-step-size = <1024>; @@ -173,8 +172,7 @@ reg = <0x1>; #address-cells = <0x2>; #size-cells = <0x1>; - nand-ecc-mode = "soft"; - nand-ecc-algo = "bch"; + nand-ecc-mode = "hw"; nand-rb = <0>; label = "main-storage-1"; nand-ecc-step-size = <1024>;