From: Duje Mihanović <duje.mihanovic@skole.hr>
Date: Sun, 10 Sep 2023 17:13:14 +0000 (+0200)
Subject: Initial commit
X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=387917135e879eefe9bc714eaba0cffd1d9b94f0;p=nixos-configuration.git

Initial commit
---

387917135e879eefe9bc714eaba0cffd1d9b94f0
diff --git a/configuration.nix b/configuration.nix
new file mode 100644
index 0000000..4938bdf
--- /dev/null
+++ b/configuration.nix
@@ -0,0 +1,190 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running ‘nixos-help’).
+
+{ config, pkgs, ... }:
+
+{
+  imports =
+    [ # Include the results of the hardware scan.
+      ./hardware-configuration.nix
+    ];
+
+  # Bootloader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  boot.extraModprobeConfig =
+    ''
+      options radeon si_support=0 cik_support=0
+      options amdgpu si_support=1 cik_support=1
+    '';
+
+  networking.hostName = "elitedesk"; # Define your hostname.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+  networking.interfaces.eno1.wakeOnLan.enable = true;
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Enable networking
+  networking.networkmanager.enable = true;
+
+  # Set your time zone.
+  time.timeZone = "Europe/Zagreb";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_US.UTF-8";
+
+  i18n.extraLocaleSettings = {
+    LC_ADDRESS = "hr_HR.UTF-8";
+    LC_IDENTIFICATION = "hr_HR.UTF-8";
+    LC_MEASUREMENT = "hr_HR.UTF-8";
+    LC_MONETARY = "hr_HR.UTF-8";
+    LC_NAME = "hr_HR.UTF-8";
+    LC_NUMERIC = "hr_HR.UTF-8";
+    LC_PAPER = "hr_HR.UTF-8";
+    LC_TELEPHONE = "hr_HR.UTF-8";
+    LC_TIME = "hr_HR.UTF-8";
+  };
+
+  # Enable the X11 windowing system.
+  services.xserver.enable = true;
+
+  # Enable the GNOME Desktop Environment.
+  services.xserver.displayManager.gdm.enable = true;
+  services.xserver.desktopManager.gnome.enable = true;
+
+  # Configure keymap in X11
+  services.xserver = {
+    layout = "hr";
+    xkbVariant = "";
+    xkbOptions = "caps:swapescape";
+  };
+
+  # Configure console keymap
+  console.keyMap = "croat";
+
+  # Enable CUPS to print documents.
+  services.printing.enable = true;
+
+  # Enable sound with pipewire.
+  sound.enable = true;
+  hardware.pulseaudio.enable = false;
+  security.rtkit.enable = true;
+  services.pipewire = {
+    enable = true;
+    alsa.enable = true;
+    alsa.support32Bit = true;
+    pulse.enable = true;
+    # If you want to use JACK applications, uncomment this
+    #jack.enable = true;
+
+    # use the example session manager (no others are packaged yet so this is enabled by default,
+    # no need to redefine it in your config for now)
+    #media-session.enable = true;
+  };
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.xserver.libinput.enable = true;
+
+  programs.zsh = {
+    enable = true;
+    autosuggestions.enable = true;
+    syntaxHighlighting.enable = true;
+  };
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  users.users.duje = {
+    uid = 1000;
+    isNormalUser = true;
+    description = "Duje";
+    extraGroups = [ "networkmanager" "wheel" "libvirtd" ];
+    packages = with pkgs; [
+      librewolf
+      thunderbird
+      dino
+      nheko
+      pass
+      passExtensions.pass-otp
+      passExtensions.pass-audit
+      passExtensions.pass-genphrase
+    ];
+    openssh.authorizedKeys.keys =
+      [ "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIMI2evf5v4ghSCJWacQJGMINjYW48WZYLvL6KIob1rd" ];
+    shell = pkgs.zsh;
+  };
+
+  # Allow unfree packages
+  nixpkgs.config.allowUnfree = true;
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  environment.systemPackages = with pkgs; [
+  #  vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+  #  wget
+    neovim
+    lm_sensors
+    brasero
+  ];
+
+  virtualisation.libvirtd.enable = true;
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  services.openssh.enable = true;
+
+  services.smartd.enable = true;
+  programs.msmtp = {
+    enable = true;
+    defaults = {
+      auth = true;
+      tls = true;
+      tls_starttls = true;
+      aliases = "/etc/aliases";
+    };
+    accounts = {
+      default = {
+	from = "duje.mihanovic@skole.hr";
+	host = "smtp.skole.hr";
+	port = 587;
+	user = "duje.mihanovic";
+	passwordeval = "cat /secrets/email.txt";
+      };
+    };
+  };
+
+  environment.etc."aliases" = {
+    text = ''
+      root: duje.mihanovic@skole.hr
+      duje: duje.mihanovic@skole.hr
+      mailer-daemon: duje.mihanovic@skole.hr
+    '';
+    mode = "0644";
+  };
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "23.05"; # Did you read the comment?
+
+}