From: Oliver Gaskell Date: Thu, 12 Sep 2024 15:50:54 +0000 (+0100) Subject: arm: SC598-SOM-EZKIT initial support X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=38742c748562d0faee9f6831858322e7b5feb670;p=u-boot.git arm: SC598-SOM-EZKIT initial support Adds support for Analog Devices' SC598-SOM-EZKIT board. Includes: - CONFIG options common to all SC5xx SoCs - SoC specific configs in mach-sc5xx/Kconfig - SPL config options in common/spl/Kconfig - Memory Map for SPL - Necessary board-specific init functions - Board-specific Kconfig and environment in board/adi/ - Memory configuration Co-developed-by: Greg Malysa Signed-off-by: Greg Malysa Co-developed-by: Nathan Barrett-Morrison Signed-off-by: Nathan Barrett-Morrison Co-developed-by: Trevor Woerner Signed-off-by: Trevor Woerner Signed-off-by: Oliver Gaskell --- diff --git a/Kconfig b/Kconfig index 82df59f176..1596139160 100644 --- a/Kconfig +++ b/Kconfig @@ -208,7 +208,7 @@ config ENV_VARS_UBOOT_CONFIG config NR_DRAM_BANKS int "Number of DRAM banks" - default 1 if ARCH_SUNXI || ARCH_OWL + default 1 if ARCH_SC5XX || ARCH_SUNXI || ARCH_OWL default 4 help This defines the number of DRAM banks. @@ -545,6 +545,7 @@ config SYS_LOAD_ADDR default 0x12000000 if ARCH_MX6 && !(MX6SL || MX6SLL || MX6SX || MX6UL || MX6ULL) default 0x80800000 if ARCH_MX7 default 0x90000000 if FSL_LSCH2 || FSL_LSCH3 + default 0x0 if ARCH_SC5XX help Address in memory to use as the default safe load address. @@ -644,6 +645,7 @@ config TEXT_BASE default 0x2a000000 if MACH_SUN9I default 0x4a000000 if SUNXI_MINIMUM_DRAM_MB >= 256 default 0x42e00000 if SUNXI_MINIMUM_DRAM_MB >= 64 + default 0x96000000 if ARCH_SC5XX && SC59X_64 hex "Text Base" help The address in memory that U-Boot will be copied and executed from diff --git a/MAINTAINERS b/MAINTAINERS index 0bc7f2f22d..0f4eee367d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -607,12 +607,14 @@ T: git https://github.com/analogdevicesinc/lnxdsp-u-boot F: arch/arm/dts/sc5* F: arch/arm/include/asm/arch-adi/ F: arch/arm/mach-sc5xx/ +F: board/adi/ F: doc/device-tree-bindings/arm/adi/adi,sc5xx.yaml F: doc/device-tree-bindings/clock/adi,sc5xx-clocks.yaml F: doc/device-tree-bindings/timer/adi,sc5xx-gptimer.yaml F: drivers/clk/adi/ F: drivers/serial/serial_adi_uart4.c F: drivers/timer/adi_sc5xx_timer.c +F: include/configs/sc5* F: include/env/adi/ ARM SNAPDRAGON diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 72960126ee..348f48b2ce 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1871,9 +1871,15 @@ config ARCH_SC5XX select ADI_SC5XX_TIMER select DM select DM_SERIAL + select HAS_CUSTOM_SYS_INIT_SP_ADDR select PANIC_HANG select SPL + select SPL_BOOTROM_SUPPORT select SPL_DM + select SPL_DM_SEQ_ALIAS + select SPL_LIBGENERIC_SUPPORT + select SPL_LIBCOMMON_SUPPORT + select SPL_SKIP_LOWLEVEL_INIT select SUPPORT_SPL select TIMER diff --git a/arch/arm/mach-sc5xx/Kconfig b/arch/arm/mach-sc5xx/Kconfig index 2ec09dbf3e..4e587eb0b3 100644 --- a/arch/arm/mach-sc5xx/Kconfig +++ b/arch/arm/mach-sc5xx/Kconfig @@ -13,6 +13,9 @@ if ARCH_SC5XX +config SYS_VENDOR + default "adi" + choice prompt "SC5xx SoC Select" help @@ -39,12 +42,33 @@ config SC59X_64 select ARM64 select COMMON_CLK_ADI_SC598 select GICV3 + select GICV3_SUPPORT_GIC600 select GIC_600_CLEAR_RDPD select MMC_SDHCI_ADMA_FORCE_32BIT - select NOP_PHY + select NOP_PHY if PHY endchoice +if SC59X_64 + +choice + prompt "SC59x 64-bit board select" + +config TARGET_SC598_SOM_EZKIT + bool + prompt "SC598-SOM with SOMCRR-EZKIT" + select ADI_CARRIER_SOMCRR_EZKIT + +endchoice + +endif + +config ADI_IMAGE + string "ADI fitImage type" + help + The image built by the ADI ADSP Linux build system. + Is one of tiny, minimal, full. + config SC_BOOT_MODE int "SC5XX boot mode select" default 1 @@ -84,10 +108,25 @@ config SC_BOOT_OSPI_SSEL This is the OSPI chip select number to use for booting, Y in the expression `sf probe X:Y` +config SYS_BOOTM_LEN + hex + default 0x1800000 + config SYS_FLASH_BASE hex default 0x60000000 +config SYS_MALLOC_F_LEN + default 0x14000 + +config SYS_LOAD_ADDR + hex + default 0x0 + +config SYS_MALLOC_LEN + hex + default 1048576 + config UART_CONSOLE int default 0 @@ -463,4 +502,6 @@ config PINCTRL_ADI bool default y +source "board/adi/sc598-som-ezkit/Kconfig" + endif diff --git a/arch/arm/mach-sc5xx/Makefile b/arch/arm/mach-sc5xx/Makefile index eeb56c078b..0955c509a5 100644 --- a/arch/arm/mach-sc5xx/Makefile +++ b/arch/arm/mach-sc5xx/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_SC57X) += sc57x.o obj-$(CONFIG_SC58X) += sc58x.o obj-$(CONFIG_SC59X) += sc59x.o obj-$(CONFIG_SC59X_64) += sc59x_64.o +obj-$(CONFIG_SC59X_64) += sc59x_64-spl.o obj-$(CONFIG_SPL_BUILD) += spl.o obj-$(CONFIG_SYSCON) += rcu.o diff --git a/arch/arm/mach-sc5xx/sc59x_64-spl.c b/arch/arm/mach-sc5xx/sc59x_64-spl.c new file mode 100644 index 0000000000..3992538133 --- /dev/null +++ b/arch/arm/mach-sc5xx/sc59x_64-spl.c @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * (C) Copyright 2024 - Analog Devices, Inc. + */ + +#include + +// Table 47-14 in SC598 hardware reference manual +const struct adi_boot_args adi_rom_boot_args[] = { + // JTAG/no boot + [0] = {0, 0, 0}, + // SPI master, used for qspi as well + [1] = {0x60040000, 0x00040000, 0x20620247}, + // SPI slave + [2] = {0, 0, 0x00000212}, + // UART slave + [3] = {0, 0, 0x00000013}, + // Linkport slave + [4] = {0, 0, 0x00000014}, + // OSPI master + [5] = {0x60040000, 0, 0x00000008}, + // eMMC + [6] = {0x201, 0, 0x86009}, + // reserved, also no boot + [7] = {0, 0, 0} +}; diff --git a/arch/arm/mach-sc5xx/sc59x_64.c b/arch/arm/mach-sc5xx/sc59x_64.c index 82537bf196..001747f223 100644 --- a/arch/arm/mach-sc5xx/sc59x_64.c +++ b/arch/arm/mach-sc5xx/sc59x_64.c @@ -9,6 +9,7 @@ */ #include +#include #include #include @@ -24,6 +25,30 @@ #define BITM_SCB5_SPI2_OSPI_REMAP_REMAP 0x00000003 #define ENUM_SCB5_SPI2_OSPI_REMAP_OSPI0 0x00000001 +static struct mm_region sc598_mem_map[] = { + { + /* Peripherals */ + .virt = 0x0UL, + .phys = 0x0UL, + .size = 0x80000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* DDR */ + .virt = 0x80000000UL, + .phys = 0x80000000UL, + .size = 0x40000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE + }, { + /* List terminator */ + 0, + } +}; + +struct mm_region *mem_map = sc598_mem_map; + adi_rom_boot_fn adi_rom_boot = (adi_rom_boot_fn)0x000000e4; void sc5xx_enable_rgmii(void) diff --git a/arch/arm/mach-sc5xx/soc.c b/arch/arm/mach-sc5xx/soc.c index 8f13127a66..f3619206e9 100644 --- a/arch/arm/mach-sc5xx/soc.c +++ b/arch/arm/mach-sc5xx/soc.c @@ -172,6 +172,42 @@ void fixup_dp83867_phy(struct phy_device *phydev) phy_write(phydev, MDIO_DEVAD_NONE, 0, 0x3100); } +extern char __bss_start, __bss_end; +extern char __rel_dyn_end; + +void bss_clear(void) +{ + char *bss_start = &__bss_start; + char *bss_end = &__bss_end; + char *rel_dyn_end = &__rel_dyn_end; + + char *start; + + if (rel_dyn_end >= bss_start && rel_dyn_end <= bss_end) + start = rel_dyn_end; + else + start = bss_start; + + u32 *pt; + size_t sz = bss_end - start; + + for (int i = 0; i < sz; i += 4) { + pt = (u32 *)(start + i); + *pt = 0; + } +} + +int board_early_init_f(void) +{ + bss_clear(); + return 0; +} + +int board_init(void) +{ + return 0; +} + int dram_init(void) { gd->ram_size = CFG_SYS_SDRAM_SIZE; diff --git a/board/adi/sc598-som-ezkit/Kconfig b/board/adi/sc598-som-ezkit/Kconfig new file mode 100644 index 0000000000..9abecbe1dd --- /dev/null +++ b/board/adi/sc598-som-ezkit/Kconfig @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# +# (C) Copyright 2024 - Analog Devices, Inc. + +if TARGET_SC598_SOM_EZKIT + +config LDR_CPU + default "ADSP-SC598-0.0" + +config SYS_BOARD + default "sc598-som-ezkit" + +config SYS_CONFIG_NAME + default "sc598-som" + +config DEFAULT_DEVICE_TREE + default "sc598-som-ezkit" + +config ADI_IMAGE + default "minimal" + +config CUSTOM_SYS_INIT_SP_ADDR + default 0x96000000 + +# SPL + +config SPL_OF_LIBFDT_ASSUME_MASK + default 0x0 + +# SPI Flash + +config SF_DEFAULT_BUS + default 2 + +config SF_DEFAULT_CS + default 1 + +config SF_DEFAULT_SPEED + default 10000000 + +# Clock Configs + +config CGU0_DF_DIV + default 0 + +config CGU0_VCO_MULT + default 80 + +config CGU0_CCLK_DIV + default 2 + +config CGU0_SCLK_DIV + default 4 + +config CGU0_SCLK0_DIV + default 4 + +config CGU0_SCLK1_DIV + default 2 + +config CGU0_DCLK_DIV + default 3 + +config CGU0_OCLK_DIV + default 8 + +config CGU0_DIV_S1SELEX + default 6 + +config CGU1_VCO_MULT + default 72 + +config CGU1_DF_DIV + default 0 + +config CGU1_CCLK_DIV + default 16 + +config CGU1_SCLK_DIV + default 8 + +config CGU1_SCLK0_DIV + default 4 + +config CGU1_SCLK1_DIV + default 2 + +config CGU1_DCLK_DIV + default 18 + +config CGU1_OCLK_DIV + default 16 + +config CGU1_DIV_S0SELEX + default 36 + +config CGU1_DIV_S1SELEX + default 90 + +endif diff --git a/board/adi/sc598-som-ezkit/sc598-som-ezkit.env b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env new file mode 100644 index 0000000000..242436c160 --- /dev/null +++ b/board/adi/sc598-som-ezkit/sc598-som-ezkit.env @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later+ */ + +/* + * (C) Copyright 2024 - Analog Devices, Inc. + */ + +#include + +adi_stage2_offset=0x40000 +adi_image_offset=0x01a0000 +adi_rfs_offset=0x1020000 +loadaddr=0x90000000 +jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc598-som-ezkit.jffs2 diff --git a/common/spl/Kconfig b/common/spl/Kconfig index c08ff06449..48775b04bb 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -86,6 +86,7 @@ config SPL_MAX_SIZE default 0x5fa0 if SUNXI_SRAM_ADDRESS = 0x0 default 0x10000 if ASPEED_AST2600 default 0x27000 if IMX8MM && SPL_TEXT_BASE = 0x7E1000 + default 0x30000 if ARCH_SC5XX && SC59X_64 default 0x0 help Maximum size of the SPL image (text, data, rodata, and linker lists @@ -110,7 +111,7 @@ config SPL_PAD_TO config SPL_HAS_BSS_LINKER_SECTION depends on SPL_FRAMEWORK bool "Use a specific address for the BSS via the linker script" - default y if ARCH_SUNXI || ARCH_MX6 || ARCH_OMAP2PLUS || MIPS || RISCV || ARCH_ZYNQMP + default y if ARCH_SUNXI || ARCH_MX6 || ARCH_OMAP2PLUS || MIPS || RISCV || ARCH_ZYNQMP || ARCH_SC5XX config SPL_BSS_START_ADDR hex "Link address for the BSS within the SPL binary" @@ -122,6 +123,7 @@ config SPL_BSS_START_ADDR default 0x4ff80000 if ARCH_SUNXI && !(MACH_SUN9I || MACH_SUNIV) default 0x2ff80000 if ARCH_SUNXI && MACH_SUN9I default 0x1000 if ARCH_ZYNQMP + default 0x200B0000 if ARCH_SC5XX && SC59X_64 choice prompt "Enforce SPL BSS limit" @@ -150,6 +152,7 @@ config SPL_BSS_MAX_SIZE depends on SPL_BSS_LIMIT default 0x100000 if ARCH_MX6 || RISCV default 0x80000 if ARCH_OMAP2PLUS || ARCH_SUNXI + default 0x10000 if ARCH_SC5XX help When non-zero, the linker checks that the actual memory used by SPL from __bss_start to __bss_end does not exceed it. @@ -268,6 +271,7 @@ config SPL_TEXT_BASE default 0x20060 if SUN50I_GEN_H6 || SUNXI_GEN_NCAT2 default 0x00060 if ARCH_SUNXI default 0xfffc0000 if ARCH_ZYNQMP + default 0x20080000 if ARCH_SC5XX default 0x0 help The address in memory that SPL will be running from. @@ -369,7 +373,7 @@ config SPL_SYS_MALLOC_SIMPLE config SPL_SHARES_INIT_SP_ADDR bool "SPL and U-Boot use the same initial stack pointer location" depends on (ARM || ARCH_JZ47XX || MICROBLAZE || RISCV) && SPL_FRAMEWORK - default n if ARCH_SUNXI || ARCH_MX6 || ARCH_MX7 + default n if ARCH_SUNXI || ARCH_MX6 || ARCH_MX7 || ARCH_SC5XX default y help In many cases, we can use the same initial stack pointer address for @@ -390,6 +394,7 @@ config SPL_STACK default 0x54000 if MACH_SUN50I || MACH_SUN50I_H5 default 0x18000 if MACH_SUN9I default 0x8000 if ARCH_SUNXI + default 0x200E4000 if ARCH_SC5XX && SC59X_64 help Address of the start of the stack SPL will use before SDRAM is initialized. @@ -1124,6 +1129,7 @@ config SPL_PAYLOAD_ARGS_ADDR hex "Address in memory to load 'args' file for Falcon Mode to" depends on SPL_OS_BOOT || SPL_LOAD_FIT_OPENSBI_OS_BOOT default 0x88000000 if ARCH_OMAP2PLUS + default 0x99000000 if ARCH_SC5XX && SC59X_64 help Address in memory where the 'args' file, typically a device tree will be loaded in to memory. diff --git a/include/configs/sc598-som.h b/include/configs/sc598-som.h new file mode 100644 index 0000000000..964c694bbe --- /dev/null +++ b/include/configs/sc598-som.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * (C) Copyright 2024 - Analog Devices, Inc. + */ + +#ifndef __CONFIG_SC598_SOM_H +#define __CONFIG_SC598_SOM_H + +/* + * Memory Settings + */ +#define MEM_IS43TR16512BL +#define MEM_ISSI_4Gb_DDR3_800MHZ +#define MEM_DMC0 + +#define CFG_SYS_SDRAM_BASE 0x90000000 +#define CFG_SYS_SDRAM_SIZE 0x0e000000 + +/* GIC */ +#define GICD_BASE 0x31200000 +#define GICR_BASE 0x31240000 + +#endif