From: Jagan Teki Date: Sat, 24 Nov 2018 09:01:12 +0000 (+0530) Subject: spi: Zap CONFIG_HARD_SPI X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=35f9d9bdd07d5e508272421b215ffaffd867bad8;p=u-boot.git spi: Zap CONFIG_HARD_SPI In legacy CONFIG_HARD_SPI initalizing spi_init code, which was removed during dm conversion cleanup. So remove the dead instances of CONFIG_HARD_SPI, and related code. Signed-off-by: Jagan Teki --- diff --git a/README b/README index a46c7c63a4..17d56b8034 100644 --- a/README +++ b/README @@ -1932,14 +1932,6 @@ The following options need to be configured: SPI configuration items (port pins to use, etc). For an example, see include/configs/sacsng.h. - CONFIG_HARD_SPI - - Enables a hardware SPI driver for general-purpose reads - and writes. As with CONFIG_SOFT_SPI, the board configuration - must define a list of chip-select function pointers. - Currently supported on some MPC8xxx processors. For an - example, see include/configs/mpc8349emds.h. - CONFIG_SYS_SPI_MXC_WAIT Timeout for waiting until spi transfer completed. default: (CONFIG_SYS_HZ/100) /* 10 ms */ diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index 849a69aced..c9c9964630 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -18,13 +18,6 @@ #define HWCONFIG_BUFFER_SIZE 256 #endif -/* CONFIG_HARD_SPI triggers SPI bus initialization in PowerPC */ -#if defined(CONFIG_MPC8XXX_SPI) || defined(CONFIG_FSL_ESPI) -# ifndef CONFIG_HARD_SPI -# define CONFIG_HARD_SPI -# endif -#endif - #define CONFIG_LMB #define CONFIG_SYS_BOOT_RAMDISK_HIGH diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c index 4ec0af4d1c..d40ed3742e 100644 --- a/board/freescale/mpc8349emds/mpc8349emds.c +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -273,7 +273,7 @@ void spi_cs_deactivate(struct spi_slave *slave) iopd->dat |= SPI_CS_MASK; } -#endif /* CONFIG_HARD_SPI */ +#endif #if defined(CONFIG_OF_BOARD_SETUP) int ft_board_setup(void *blob, bd_t *bd) diff --git a/board/ids/ids8313/ids8313.c b/board/ids/ids8313/ids8313.c index a411d4e7f6..d547af4b05 100644 --- a/board/ids/ids8313/ids8313.c +++ b/board/ids/ids8313/ids8313.c @@ -208,4 +208,4 @@ void spi_cs_deactivate(struct spi_slave *slave) /* deactivate the spi_cs */ setbits_be32(&iopd->dat, IDSCPLD_SPI_CS_MASK); } -#endif /* CONFIG_HARD_SPI */ +#endif diff --git a/common/board_f.c b/common/board_f.c index 60634e52cd..a3e80ca951 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -257,15 +257,6 @@ __weak int init_func_vid(void) } #endif -#if defined(CONFIG_HARD_SPI) -static int init_func_spi(void) -{ - puts("SPI: "); - puts("ready\n"); - return 0; -} -#endif - static int setup_mon_len(void) { #if defined(__ARM__) || defined(__MICROBLAZE__) @@ -863,9 +854,6 @@ static const init_fnc_t init_sequence_f[] = { #endif #if defined(CONFIG_VID) && !defined(CONFIG_SPL) init_func_vid, -#endif -#if defined(CONFIG_HARD_SPI) - init_func_spi, #endif announce_dram_init, dram_init, /* configure available RAM banks */ diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index 11cb3955da..83d774527a 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -102,7 +102,6 @@ /* DSPI and Serial Flash */ #define CONFIG_CF_DSPI -#define CONFIG_HARD_SPI #define CONFIG_SYS_SBFHDR_SIZE 0x7 #ifdef CONFIG_CMD_SPI # define CONFIG_SYS_DSPI_CS2 diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index f08896ef0a..4b8ef38c0b 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -151,7 +151,6 @@ /* DSPI and Serial Flash */ #define CONFIG_CF_DSPI #define CONFIG_SERIAL_FLASH -#define CONFIG_HARD_SPI #define CONFIG_SYS_SBFHDR_SIZE 0x7 #ifdef CONFIG_CMD_SPI diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 16becbdbed..87cdbae1db 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -116,7 +116,6 @@ /* DSPI and Serial Flash */ #define CONFIG_CF_DSPI #define CONFIG_SERIAL_FLASH -#define CONFIG_HARD_SPI #define CONFIG_SYS_SBFHDR_SIZE 0x7 #ifdef CONFIG_CMD_SPI diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 99b60d5d82..d41b7c4492 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -142,7 +142,6 @@ /* DSPI and Serial Flash */ #define CONFIG_CF_DSPI -#define CONFIG_HARD_SPI #define CONFIG_SYS_SBFHDR_SIZE 0x13 #ifdef CONFIG_CMD_SPI diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 524a10fc95..86a1233e32 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -370,11 +370,6 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_BUS_NUM 1 -/* - * eSPI - Enhanced SPI - */ -#define CONFIG_HARD_SPI - #if defined(CONFIG_SPI_FLASH) #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index c9ed70ca4c..eeb19a9fa6 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -386,12 +386,6 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_BUS_NUM 1 -/* - * eSPI - Enhanced SPI - */ - -#define CONFIG_HARD_SPI - #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h index 423ecd71c2..1bbe9d9b37 100644 --- a/include/configs/UCP1020.h +++ b/include/configs/UCP1020.h @@ -287,11 +287,6 @@ #define CONFIG_SYS_I2C_NCT72_ADDR 0x4C #define CONFIG_SYS_I2C_IDT6V49205B 0x69 -/* - * eSPI - Enhanced SPI - */ -#define CONFIG_HARD_SPI - #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index 4adcd956ef..1908d35bcc 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -182,10 +182,6 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 #ifndef CONFIG_TRAILBLAZER -/* - * eSPI - Enhanced SPI - */ -#define CONFIG_HARD_SPI #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h index 1c94bf9fa1..f4d717213c 100644 --- a/include/configs/dreamplug.h +++ b/include/configs/dreamplug.h @@ -35,7 +35,6 @@ #endif #ifdef CONFIG_CMD_SF -#define CONFIG_HARD_SPI 1 #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_CS 0 #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ diff --git a/include/configs/ds109.h b/include/configs/ds109.h index c06f0058de..2c7928e88c 100644 --- a/include/configs/ds109.h +++ b/include/configs/ds109.h @@ -38,7 +38,6 @@ #endif #ifdef CONFIG_CMD_SF -#define CONFIG_HARD_SPI 1 #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_CS 0 #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 28124dd4b1..7e4c497fe0 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -159,7 +159,6 @@ */ #define CONFIG_TSEC1 #define CONFIG_TSEC2 -#define CONFIG_HARD_SPI /* * NOR FLASH setup @@ -273,15 +272,6 @@ #define CONFIG_RTC_PCF8563 #define CONFIG_SYS_I2C_RTC_ADDR 0x51 -/* - * SPI setup - */ -#ifdef CONFIG_HARD_SPI -#define CONFIG_SYS_GPIO1_PRELIM -#define CONFIG_SYS_GPIO1_DIR 0x00000001 -#define CONFIG_SYS_GPIO1_DAT 0x00000001 -#endif - /* * Ethernet setup */ diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 7d84d160b4..4765764f83 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -43,7 +43,6 @@ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE -#define CONFIG_HARD_SPI #define CONFIG_DEFAULT_SPI_BUS 1 #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) diff --git a/include/configs/mxs.h b/include/configs/mxs.h index 9e59e7a4dc..4bb3621a42 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -143,7 +143,6 @@ /* SPI */ #ifdef CONFIG_CMD_SPI -#define CONFIG_HARD_SPI #define CONFIG_SPI_HALF_DUPLEX #endif diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 9465fb4702..459ecf328f 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -576,11 +576,6 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -/* - * eSPI - Enhanced SPI - */ -#define CONFIG_HARD_SPI - #if defined(CONFIG_SPI_FLASH) #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index d018c22afd..4f48370648 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -214,11 +214,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -/* - * eSPI - Enhanced SPI - */ -#define CONFIG_HARD_SPI - #if defined(CONFIG_PCI) /* * General PCI diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h index c408db865e..33ddc67bf4 100644 --- a/include/configs/stmark2.h +++ b/include/configs/stmark2.h @@ -66,7 +66,6 @@ #define CONFIG_CF_DSPI #define CONFIG_SF_DEFAULT_SPEED 50000000 #define CONFIG_SERIAL_FLASH -#define CONFIG_HARD_SPI #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_CS 1 diff --git a/include/configs/ts4800.h b/include/configs/ts4800.h index 956f7795f1..4e274bd414 100644 --- a/include/configs/ts4800.h +++ b/include/configs/ts4800.h @@ -42,11 +42,6 @@ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE -/* - * SPI Configs - * */ -#define CONFIG_HARD_SPI /* puts SPI: ready */ - /* * MMC Configs * */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index abfb0ff89f..1404fd855b 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -750,7 +750,6 @@ CONFIG_G_DNL_UMS_PRODUCT_NUM CONFIG_G_DNL_UMS_VENDOR_NUM CONFIG_H264_FREQ CONFIG_H8300 -CONFIG_HARD_SPI CONFIG_HAS_ETH0 CONFIG_HAS_ETH1 CONFIG_HAS_ETH2