From: Philip Richard Oberfichtner Date: Tue, 31 Oct 2023 07:38:44 +0000 (+0100) Subject: bootcount: Remove legacy I2C driver X-Git-Url: http://git.dujemihanovic.xyz/html/index.html?a=commitdiff_plain;h=31f4ee4b13d974ba4b973211eeb57db70bc5ea77;p=u-boot.git bootcount: Remove legacy I2C driver The legacy I2C bootcounter will hereby be removed and eventually be replaced by a driver model implementation in the follow-up commit. The legacy driver has the following drawbacks: - It's not adhering to the driver model - Settings are grabbed from Kconfig rather than device tree - i2c_{read,write} are being used instead of dm_i2c_{read,write} Signed-off-by: Philip Richard Oberfichtner Reviewed-by: Heiko Schocher --- diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig index 570252d186..7a2548ace2 100644 --- a/drivers/bootcount/Kconfig +++ b/drivers/bootcount/Kconfig @@ -79,14 +79,6 @@ config BOOTCOUNT_RAM Store the bootcount in DRAM protected against bit errors due to short power loss or holding a system in RESET. -config BOOTCOUNT_I2C - bool "Boot counter on I2C device" - help - Enable support for the bootcounter on an i2c (like RTC) device. - CFG_SYS_I2C_RTC_ADDR = i2c chip address - CONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which is used for - the bootcounter. - config BOOTCOUNT_AT91 bool "Boot counter for Atmel AT91SAM9XE" depends on AT91SAM9XE @@ -175,14 +167,6 @@ config BOOTCOUNT_BOOTLIMIT counter being cleared. If set to 0, do not set a boot limit in the environment. -config BOOTCOUNT_ALEN - int "I2C address length" - default 1 - depends on BOOTCOUNT_I2C - help - Length of the the I2C address at SYS_BOOTCOUNT_ADDR for storing - the boot counter. - config SYS_BOOTCOUNT_SINGLEWORD bool "Use single word to pack boot count and magic value" depends on BOOTCOUNT_GENERIC @@ -218,7 +202,7 @@ config SYS_BOOTCOUNT_ADDR default 0x44E3E000 if BOOTCOUNT_AM33XX || BOOTCOUNT_AM33XX_NVMEM default 0xE0115FF8 if ARCH_LS1043A || ARCH_LS1021A depends on BOOTCOUNT_AM33XX || BOOTCOUNT_GENERIC || BOOTCOUNT_EXT || \ - BOOTCOUNT_I2C || BOOTCOUNT_AM33XX_NVMEM + BOOTCOUNT_AM33XX_NVMEM help Set the address used for reading and writing the boot counter. @@ -226,13 +210,11 @@ config SYS_BOOTCOUNT_MAGIC hex "Magic value for the boot counter" default 0xB001C041 if BOOTCOUNT_GENERIC || BOOTCOUNT_EXT || \ BOOTCOUNT_AM33XX || BOOTCOUNT_ENV || \ - BOOTCOUNT_RAM || BOOTCOUNT_I2C || \ - BOOTCOUNT_AT91 || DM_BOOTCOUNT + BOOTCOUNT_RAM || BOOTCOUNT_AT91 || DM_BOOTCOUNT default 0xB0 if BOOTCOUNT_AM33XX_NVMEM depends on BOOTCOUNT_GENERIC || BOOTCOUNT_EXT || \ BOOTCOUNT_AM33XX || BOOTCOUNT_ENV || \ - BOOTCOUNT_RAM || BOOTCOUNT_I2C || \ - BOOTCOUNT_AT91 || DM_BOOTCOUNT || \ + BOOTCOUNT_RAM || BOOTCOUNT_AT91 || DM_BOOTCOUNT || \ BOOTCOUNT_AM33XX_NVMEM help Set the magic value used for the boot counter. diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile index b65959a384..d6d2389c16 100644 --- a/drivers/bootcount/Makefile +++ b/drivers/bootcount/Makefile @@ -6,7 +6,6 @@ obj-$(CONFIG_BOOTCOUNT_AT91) += bootcount_at91.o obj-$(CONFIG_BOOTCOUNT_AM33XX) += bootcount_davinci.o obj-$(CONFIG_BOOTCOUNT_RAM) += bootcount_ram.o obj-$(CONFIG_BOOTCOUNT_ENV) += bootcount_env.o -obj-$(CONFIG_BOOTCOUNT_I2C) += bootcount_i2c.o obj-$(CONFIG_BOOTCOUNT_EXT) += bootcount_ext.o obj-$(CONFIG_BOOTCOUNT_AM33XX_NVMEM) += bootcount_nvmem.o diff --git a/drivers/bootcount/bootcount_i2c.c b/drivers/bootcount/bootcount_i2c.c deleted file mode 100644 index b3ac67ea35..0000000000 --- a/drivers/bootcount/bootcount_i2c.c +++ /dev/null @@ -1,43 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2013 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - */ - -#include -#include -#include - -#define BC_MAGIC 0xbc - -void bootcount_store(ulong a) -{ - unsigned char buf[3]; - int ret; - - buf[0] = BC_MAGIC; - buf[1] = (a & 0xff); - ret = i2c_write(CFG_SYS_I2C_RTC_ADDR, CONFIG_SYS_BOOTCOUNT_ADDR, - CONFIG_BOOTCOUNT_ALEN, buf, 2); - if (ret != 0) - puts("Error writing bootcount\n"); -} - -ulong bootcount_load(void) -{ - unsigned char buf[3]; - int ret; - - ret = i2c_read(CFG_SYS_I2C_RTC_ADDR, CONFIG_SYS_BOOTCOUNT_ADDR, - CONFIG_BOOTCOUNT_ALEN, buf, 2); - if (ret != 0) { - puts("Error loading bootcount\n"); - return 0; - } - if (buf[0] == BC_MAGIC) - return buf[1]; - - bootcount_store(0); - - return 0; -}